Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Ynlieding

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Safety Information

WARSKÔGING: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Soargje derfoar dat de stroom is loskeppele foar ynstallaasje.
• Folgje alle lokale en nasjonale elektryske koades.
• Dit apparaat is allinich foar gebrûk binnen.

Pakketynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Montage Screws
• Draadmoeren
• Ynstruksjehânlieding (dit dokumint)

Opset en ynstallaasje

Tools nedich: Screwdriver, Wire Strippers, Electrical Tape.

1. Strom útsette: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage tester.
2. Besteande Switch fuortsmite: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Ofbylding: Front view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Linetried: Connect to the timer's LINE terminal.
   • Load Wire: Connect to the timer's LOAD terminal.
   • Ground Wire: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. De timer ynstallearje: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Kracht werstelle: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Operaasje en programmearring

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Ynstelle fan aktuele tiid en dei

1. Druk op de KLOK button. The time display will flash.
2. Brûk de OERE en MINÚT knoppen om de aktuele tiid oan te passen.
3. Druk op de DEI knop om de aktuele dei fan 'e wike yn te stellen.
4. Parse KLOK again to save and exit, or wait a few seconds for it to save automatically.

2. Programmearjen fan OAN/ÚT-eveneminten

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Druk op de PROG button. The display will show "1 ON".
2. Gebrûk OERE, MINÚT, en DEI buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Parse PROG wer. It display sil "1 ÚT" sjen litte.
4. Set the desired OFF time and day(s) for Program 1 using the OERE, MINÚT, en DEI knoppen.
5. Werhelje stappen 1-4 foar ekstra programma's (2 OAN/ÚT oant en mei 6 OAN/ÚT).
6. After setting all desired programs, press KLOK om werom te gean nei normale operaasje.

3. Hânlieding oerskriuwe

To manually turn the connected device ON or OFF outside of programmed times, press the ON/OFF button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Ûnderhâld

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Batterij ferfanging: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Reiniging: Clean the timer's surface with a soft, damp doek. Brûk gjin abrasive skjinmakkers of solvents.

Troubleshooting

Spesifikaasjes

• Merk: Yntermatysk
• Model Oantal: SS7C
• Item Gewicht: 0.35 pûn sterling
• Oantal ynstellings: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Skermgrutte: 1.5 ynms
• Kleur: Wyt
• Fabrikant: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Garânsje en stipe

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a 1 jier beheinde fabryksgarânsje út de datum fan oankeap. Dizze garânsje dekt defekten yn materialen en fakmanskip ûnder normaal gebrûk.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic webside of ferwize nei de kontaktgegevens dy't by jo produktferpakking steane.