Kidde Nighthawk Battery Powered Carbon Monoxide Alarm with Digital Display (Model KN-COPP-B-LP)

1. Ynlieding

The Kidde Nighthawk Carbon Monoxide Alarm, Model KN-COPP-B-LP, is designed to detect carbon monoxide (CO) gas and alert occupants to its presence. This battery-operated unit features a digital display for real-time CO level readings and provides continuous protection, even during power outages. This manual provides instructions for proper installation, operation, and maintenance to ensure optimal performance and safety.

2. Wichtige feiligens ynformaasje

Carbon monoxide (CO) is an invisible, odorless, and tasteless gas that can be fatal. It is produced when fuels burn incompletely. Sources can include furnaces, water heaters, fireplaces, gas stoves, and vehicle exhaust. Proper placement and regular testing of your CO alarm are crucial for your safety.

Nea negearje in CO-alarm. Act immediately if the alarm sounds.
Know the symptoms of CO poisoning: headache, dizziness, nausea, vomiting, confusion, and flu-like symptoms.
Soargje foar goede fentilaasje for fuel-burning appliances.
Net skilderje it alarm. Paint can clog the openings and interfere with the sensor.

Diagram illustrating potential carbon monoxide sources in a home, including a garage, basement, kitchen, living room, and chimney. — **Figure 1: Potential Carbon Monoxide Sources in Your Home.** This diagram highlights common areas where carbon monoxide can originate, such as unvented space heaters in bedrooms, clogged chimneys, faulty furnaces in basements, and vehicle exhaust in garages.

Diagram showing recommended placement of smoke and carbon monoxide alarms throughout a multi-story house, including bedrooms, hallways, and near fuel-burning appliances. — **Figure 2: Recommended Alarm Placement.** This illustration provides guidance on where to install carbon monoxide alarms, smoke alarms, and fire extinguishers on each level of a home, including bedrooms, basements, and near kitchens.

Video 1: Fire Preparedness Tips. This video from Amazon Tools & Home Improvement offers general fire preparedness advice, including the importance of smoke and carbon monoxide alarms, and where to place fire extinguishers. While not specific to this model, it provides valuable context for home safety.

3. Package Ynhâld

Kidde Nighthawk Carbon Monoxide Alarm (Model KN-COPP-B-LP)
3 AA batterijen
Befestigingsmateriaal (skroeven en muorrankers)
Instruction Manual

4. Features

Digital werjefte: Shows the level of carbon monoxide detected in parts per million (PPM). The reading updates every 15 seconds.
Batterij eksploitearre: Provides continuous protection even during power outages. Requires 3 AA batteries (included).
Test/Reset-knop: Allows for easy testing of the alarm's circuit operation and silencing of the alarm.
End of Life Alarm: Alerts the user when the unit needs to be replaced, typically after 10 years of operation.
UL-sertifisearre: Meets UL 2034 requirements for carbon monoxide alarms.

5. Ynstallaasje en opset

Follow these steps for proper installation of your Kidde Nighthawk Carbon Monoxide Alarm:

Batterij ynstallaasje: Open the battery compartment on the back of the unit. Insert the 3 AA batteries, ensuring correct polarity (+/-). Close the compartment securely.
Montage lokaasje: Choose a location where the alarm can be heard by all sleeping areas. Carbon monoxide mixes well with air, so the alarm can be mounted at eye level for easy reading or placed on a tabletop. Avoid placing it directly above or next to fuel-burning appliances, in direct sunlight, or in areas with high humidity.
Wall montage: Use the provided mounting plate and screws to secure the alarm to a wall. Drill pilot holes if necessary, insert wall anchors, and then screw the mounting plate into place. Attach the alarm to the mounting plate.
Earste test: After installation, press the 'Test/Reset' button to ensure the alarm is functioning correctly. The alarm should sound, and the digital display will show '888' or a similar test pattern.

A white Kidde Nighthawk carbon monoxide alarm mounted on a light-colored wall, with a digital display showing '0'. In the background, a person is holding a baby, suggesting a home environment. — **Figure 3: Installed Carbon Monoxide Alarm.** This image shows the Kidde Nighthawk alarm mounted on a wall, indicating a typical installation scenario in a home.

6. Bedriuwsinstruksjes

The Kidde Nighthawk Carbon Monoxide Alarm is designed for simple operation:

Normale operaasje: During normal operation, the digital display will show '0' indicating no detectable carbon monoxide. A red dot may appear in the lower right corner to confirm normal function.
Alarm testen: Press and hold the 'Test/Reset' button for a few seconds. The alarm will sound a loud, pulsating tone, and the digital display will show '888' or a similar test pattern. Release the button to stop the test. Test the alarm weekly.
CO Alarm: If carbon monoxide is detected, the alarm will sound with four quick beeps followed by five seconds of silence, repeating. The digital display will show the detected CO concentration in PPM.
Warskôging foar lege batterij: The unit will chirp once per minute and display 'Lb' on the screen when the batteries are low. Replace batteries immediately.
Peak Level Memory: The alarm stores the highest CO level detected. To view the peak level, press the 'Peak Level' button.

7. Underhâld

Regular maintenance ensures your CO alarm functions correctly:

Batterij ferfanging: Replace the 3 AA batteries at least once a year, or immediately when the low battery warning sounds.
Reiniging: Clean the alarm regularly to prevent dust and debris from accumulating. Use a soft, damp doek om de bûtenkant ôf te feegjen. Brûk gjin skjinmaaksprays of oplosmiddels.
Testen: Test the alarm weekly by pressing the 'Test/Reset' button.
Ein fan it libben: The alarm has a lifespan of approximately 10 years. When the 'End of Life' alarm sounds, replace the unit immediately.

8. Probleemoplossing

Probleem	Mooglike oarsaak	Oplossing
Alarm sounds continuously with 4 beeps and CO level displayed.	Koalstofmonokside ûntdutsen.	Immediately move to fresh air. Call 911 or your local emergency services. Do not re-enter the premises until it has been deemed safe by emergency responders.
Alarm chirps once per minute, 'Lb' displayed.	Lege batterij.	Ferfang alle 3 AA-batterijen fuortendaliks.
Alarm chirps every 30 seconds, 'End' displayed.	Ein fan ienheid libben.	Replace the entire CO alarm unit. The sensor has reached the end of its operational life.
Alarm does not respond to 'Test/Reset' button.	Gjin stroom- of apparaatstoring.	Check battery installation. If batteries are new and correctly installed, and the unit still doesn't respond, replace the unit.

9. Spesifikaasjes

Model Oantal: KN-COPP-B-LP
Power Boarne: 3 AA-batterijen (ynbegrepen)
Sensor Type: Elektrochemysk
Operaasje Feuchte: 5% oant 95% relative vochtigheid, non-condensing
Item Gewicht: 10.5 oz
Produkt Ofmjittings: 2 x 8 x 11 inch
Sertifikaasjes: UL 2034

10. Garânsje en stipe

This Kidde Nighthawk Carbon Monoxide Alarm comes with a Sân jier beheinde garânsje. For warranty claims or technical support, please refer to the contact information provided in the original product packaging or visit the official Kidde webside. Bewarje jo oankeapbewiis as bewiis fan oankeap foar garânsjedoelen.

Kidde KN-COPP-B-LP