Westek OMLC163BC Motion-Sensing Light Control User Manual

1. Ynlieding

The Westek OMLC163BC Motion-Sensing Light Control automatically activates a light when motion is detected within its sensing range. This device is designed to provide convenient, automatic lighting and enhance security by deterring unwanted intrusion. It is compatible with various bulb types up to 150 Watts.

2. Safety Information

WARSKÔGING: Om it risiko op brân, elektryske skok of ferwûning te ferminderjen, lês en folgje alle ynstruksjes sekuer.

• Elektryske feiligens: Always turn off power to the light socket at the circuit breaker before installation, removal, or servicing.
• Fixture kompatibiliteit: The motion sensor is not designed for use with enclosed or shaded fixtures, or with fixtures that have glass or plastic covers. Use only with ceiling-mounted, bare bulb fixtures.
• Bulb-kompatibiliteit: Suitable for use with incandescent, compact fluorescent (CFL), or LED bulbs up to 150 Watts. Do not exceed the maximum wattage.
• Ynstallaasje hichte: Suitable for fixtures mounted from 8 to 18 feet high.
• Foarstel 65 warskôging: Dit produkt befettet gemikaliën dy't bekend binne by de steat Kalifornje om kanker en bertedefekten of oare reproduktive skea te feroarsaakjen.

3. Features

The Westek OMLC163BC Motion-Sensing Light Control offers the following features:

• Automatically turns light on when motion is detected.
• Turns off 10 minutes after motion stops.
• 180-degree sensing window with a 20 ft detection zone.
• Compatible with LED, compact fluorescent, halogen, and incandescent bulbs up to 150 Watts.
• Easy screw-in installation.

4. Ynstallaasje

Folgje dizze stappen foar goede ynstallaasje:

1. Strom útsette: Ensure the power to the light socket is turned off at the circuit breaker before beginning installation.
2. Remove existing bulb: Carefully remove any light bulb currently in the socket.
3. Screw in device: Screw the motion-sensing light control device into the empty light socket until it is snug.
4. Install light bulb: Screw your desired light bulb (LED, CFL, halogen, or incandescent up to 150 Watts) into the control device's socket.
5. Adjust sensor: The motion detection sensor can be tilted up or down (up to 20 degrees in either direction) and rotated left or right (up to 90 degrees in either direction) to optimize the detection area.
6. Stroom weromsette: Skeakelje de macht wer op by de circuit breaker.

NOTE: For best performance, the sensor should be oriented below the bulb.

5. Operaasje

Once installed and powered on, the Westek OMLC163BC Motion-Sensing Light Control operates automatically:

• The light will turn on when motion is detected within its 180-degree, 20-foot detection zone.
• The light will remain on as long as motion is continuously detected.
• After motion ceases, the light will automatically turn off after approximately 10 minutes.
• The sensor is designed to ignore ambient light, meaning it will activate regardless of existing light conditions.

6. Underhâld

The Westek OMLC163BC Motion-Sensing Light Control requires minimal maintenance:

• Ensure the sensor lens is kept clean and free from obstructions (e.g., dirt, dust, spiderwebs) to maintain optimal detection performance. Use a soft, dry cloth for cleaning.
• Brûk gjin abrasive skjinmakkers of oplosmiddels op it apparaat.
• Periodically check the device for any signs of damage or loose connections.

7. Probleemoplossing

If you experience issues with your motion-sensing light control, refer to the following:

• Ljocht giet net oan:
  Check power: Ensure the power to the light socket is on at the circuit breaker.
  Check bulb: Verify the light bulb is working and correctly screwed into the device.
  Check sensor alignment: Adjust the sensor's direction to ensure it covers the desired detection area.
  Hindernissen: Ensure there are no obstructions blocking the sensor's view.
• Ljocht bliuwt kontinu oan:
  Continuous motion: Confirm there is no continuous motion within the detection zone (e.g., swaying branches, pets).
  Sensor defekt: If no motion is present and the light remains on, the sensor may be faulty.
• Light turns on too frequently or not frequently enough:
  Sensor gefoelichheid: This device does not have adjustable sensitivity. Ensure the sensor is aimed correctly to cover only the desired area.
  Omjouwingsfaktoaren: Extreme temperatures or strong air currents can sometimes affect sensor performance.
• Light turns off too quickly or too slowly:
  Fixed duration: The device has a fixed 10-minute duration after motion stops and does not offer adjustable time settings.

8. Spesifikaasjes

9. Warranty Information

AmerTac provides a limited warranty to the original purchaser of this product against defects in material and workmanship for a period of 5 jier from the date of purchase. For detailed warranty information, please visit the manufacturer's website at www.amertac.com/warranties.

10. Stipe en kontakt ynformaasje

For technical support or inquiries, please contact AmerTac:

• Adres: 250 Boulder Dr, Breinigsville, PA 18031, USA
• Tillefoan: 610-336-1330
• Website: www.amertac.com