Beurer BM60 Blood Pressure Monitor User Manual

1. Ynlieding

Thank you for choosing the Beurer BM60 Upper Arm Blood Pressure Monitor. This device is designed for fully automatic, non-invasive measurement of arterial blood pressure and pulse rate on the upper arm. It features a patented resting indicator for precise results, a large LCD display, WHO classification, and arrhythmia detection. Please read this manual carefully before first use and keep it for future reference.

Key Features:

• Fully automatic blood pressure and pulse measurement on the upper arm.
• Patented resting indicator for accurate measurement results.
• Grutte, maklik te lêzen LCD-display.
• WHO (World Health Organization) classification indicator.
• Arrhythmia detection.
• 2 user memory channels with 60 memory spaces each.
• Calculates average of all saved morning and evening measurements for the last 7 days.
• Automatyske útskeakelje funksje.
• Includes batteries and a storage bag.

2. Safety Information

Please observe the following safety instructions to ensure safe and effective use of your blood pressure monitor:

• This device is intended for measuring human arterial blood pressure and pulse rate. It is not intended for use on children.
• Do not attempt to repair the device yourself. Any repairs must be performed by authorized service personnel.
• Consult your doctor before using the device if you have any medical conditions, especially if you have a pacemaker or other implanted devices.
• Do not use the device in areas with high electromagnetic fields, such as near mobile phones or microwave ovens, as this may affect accuracy.
• Measurements taken by yourself are for your information only. Do not alter the dosage of any medicines prescribed by your doctor based on self-measurements.
• Ensure the cuff is applied correctly and comfortably. Over-tightening can cause discomfort or injury.
• Hâld it apparaat en syn ûnderdielen bûten berik fan bern.

3. Produkt Overview

The Beurer BM60 Blood Pressure Monitor consists of the main unit and an upper arm cuff. Familiarize yourself with the components:

Figure 1: Beurer BM60 Blood Pressure Monitor main unit.

Figure 2: The BM60 monitor connected to its upper arm cuff.

figuer 3: Close-up view of the M1, Power, and M2 buttons on the monitor.

Figure 4: The LCD display showing systolic, diastolic, pulse, and memory indicators.

4. Opsette

4.1 Batterij Ynstallaasje

1. Iepenje de batterij compartment cover op 'e rêch fan it apparaat.
2. Insert four (4) AA 1.5V batteries, ensuring correct polarity (+/-).
3. Slút it deksel fan it batterijfak feilich.
4. The low battery indicator will appear on the display when batteries need replacement.

4.2 Connecting the Cuff

1. Insert the air tube connector from the cuff firmly into the port on the left side of the monitor unit.
2. Soargje derfoar dat de ferbining feilich is om loftlekkage tidens de mjitting te foarkommen.

4.3 De manchet oanbringe

The standard cuff is suitable for upper arm circumferences of 23-35 cm. An optional XL cuff (30-42 cm) is available separately.

1. Place the cuff on your bare upper left arm, approximately 2-3 cm above the elbow joint. The air tube should run along the inside of your arm.
2. Ensure the cuff is snug but not too tight. You should be able to fit two fingers under the cuff.
3. The arrow on the cuff should point towards your hand.

Figure 5: Correct placement of the cuff on the upper arm.

Figure 6: Detail of the cuff showing the arm circumference guide (22-32cm in this example, actual cuff is 23-35cm).

5. Bedriuwsinstruksjes

5.1 Foardat mjitting

• Rêst op syn minst 5 minuten foardat jo in mjitting nimme.
• Avoid eating, drinking alcohol, smoking, or exercising for at least 30 minutes prior to measurement.
• Sit in a relaxed position with your back supported and feet flat on the floor. Your arm should be resting on a table so the cuff is at heart level.
• Bliuw stil en stil tidens de mjitting.

5.2 In mjitting nimme

1. Druk op de ON/OFF knop (I) to start the measurement.
2. The cuff will automatically inflate, and the measurement will begin.
3. During the measurement, the device will display a patented resting indicator. This indicates whether your circulatory system is sufficiently at rest for an accurate reading.
4. Once the measurement is complete, the systolic pressure, diastolic pressure, and pulse rate will be displayed on the LCD screen.
5. The results will also be classified according to WHO guidelines and checked for arrhythmia.
6. The device automatically stores the measurement in the selected user memory (M1 or M2).
7. The device will automatically switch off after approximately one minute of inactivity.

5.3 Geheugenfunksjes

The BM60 has two user memory channels (M1 and M2), each capable of storing 60 measurements.

• In brûker selektearje: Before starting a measurement, press the M1 or M2 knop om de winske brûkerspro te selektearjenfile.
• Viewing Stored Measurements: Mei it apparaat út, druk op de M1 or M2 knop oan view the stored measurements for that user. Repeated presses will cycle through the readings.
• 7-Day Average: The device can display an average of all saved morning and evening readings taken over the last 7 days for each user. Refer to the full user manual for specific instructions on accessing this feature.

6. Underhâld

6.1 Cleaning

• Meitsje de monitor-ienheid en manchet skjin mei in bytsje damp doek. Brûk gjin abrasive skjinmakkers of dompel it apparaat yn wetter.
• Waskje de manchet net.

6.2 Opslach

• Bewarje it apparaat yn 'e levere opslachtas as it net yn gebrûk is.
• Hâld it apparaat op in koel, droech plak, fuort fan direkt sinneljocht en ekstreme temperatueren.
• Fuortsmite batterijen as it apparaat sil net brûkt wurde foar in langere perioade.

Figure 7: The cuff can be rolled up for compact storage in the included bag.

7. Probleemoplossing

If you encounter issues with your Beurer BM60, refer to the table below for common problems and solutions:

If the problem persists, contact Beurer customer support or your local service center.

8. Spesifikaasjes

9. Garânsje en stipe

9.1 Garânsje

The Beurer BM60 Blood Pressure Monitor comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

9.2 Customer Support

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Beurer customer support. Contact information can typically be found on the Beurer official webside of op 'e produktferpakking.