SEM 15163
SEM Presidio Interior Paint Aerosol (Model 15163) Instruction Manual
Brand: SEM | Model: 15163
Ynlieding
This manual provides detailed instructions for the safe and effective use of the SEM Presidio Interior Paint Aerosol, Model 15163. This product is designed for coating interior surfaces such as metal, plastic, and vinyl, offering a matte finish. Please read all instructions carefully before use.
Image: SEM Presidio Interior Paint Aerosol can, 12 oz, with a black color swatch. The label indicates "COLOR COAT Flexible Coating" and model number 15163.
Safety Information
WARSKÔGING: This product is an extremely flammable aerosol. Contents under pressure. Vapors may cause flash fire. Harmful if swallowed. Vapors harmful. Causes serious eye irritation. Causes skin irritation. Read all cautions on the back panel of the can before use.
- Brûk yn in goed fentileare gebiet.
- Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
- De kontener net trochstikke of ferbaarne.
- Do not expose to temperatures exceeding 120°F (49°C).
- Draach passende persoanlike beskermingsmiddelen, ynklusyf wanten en eachbeskerming.
- Avoid breathing vapors or spray mist.
- Hâld bûten it berik fan bern.
- Ferwiderje ynhâld / kontener yn oerienstimming mei pleatslike regeljouwing.
Foarstel 65 warskôging: Dit produkt kin gemikaliën befetsje dy't bekend binne yn 'e steat Kalifornje om kanker en berteôfwikingen as oare reproduktive skea te feroarsaakjen.
Opset en Tarieding
- Oerflak reiniging: Thoroughly clean the surface to be painted with a suitable wax and grease remover. Ensure the surface is free of dirt, oil, wax, and other contaminants.
- Surface tarieding: For optimal adhesion, lightly abrade smooth surfaces with fine-grit sandpaper (e.g., 400-600 grit wet/dry) or a scuff pad. Re-clean the abraded surface to remove any dust.
- Maskerjen: Mask off any areas not intended for painting using painter's tape and masking paper or plastic.
- Miljeubetingsten: Ensure the application area is well-ventilated. Apply paint in a temperature range of 50°F to 85°F (10°C to 29°C) and moderate humidity. Avoid direct sunlight or extremely humid conditions.
- Test Spray: Always perform a test spray on an inconspicuous area or a test panel to verify color match and adhesion before applying to the main surface.
Gebrûksoanwizings (applikaasje)
- Shake Can: Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue to shake occasionally during application.
- Applikaasjetechnyk: Hold the can approximately 8-10 inches (20-25 cm) from the surface. Apply light, even coats using a steady, sweeping motion. Overlap each pass slightly for uniform coverage.
- Meardere lagen: Apply 2-3 light coats to achieve desired color and coverage. Allow sufficient flash-off time between coats (typically 5-10 minutes, or until the surface is tacky but not wet).
- Droogtiid: The paint will be dry to the touch within an hour. For full cure and maximum durability, allow 24 hours. Avoid handling or exposing the painted surface to moisture during the curing process.
Ûnderhâld en opslach
- Can Clean-up: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging. Wipe the nozzle clean.
- Opslach: Store the aerosol can in a cool, dry place between 50°F and 85°F (10°C and 29°C). Do not store in direct sunlight or where temperatures may exceed 120°F (49°C).
- Beskikberens: Dispose of empty cans or unused product according to local hazardous waste regulations.
Troubleshooting
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| Uneven Coverage / Streaks | Improper shaking, inconsistent spray distance, too thick coats. | Shake can thoroughly. Maintain consistent 8-10 inch distance. Apply multiple light coats. |
| Poor Adhesion | Inadequate surface cleaning or preparation. | Ensure surface is clean and free of contaminants. Lightly abrade smooth surfaces. |
| Nozzle Clogging | Paint dried in nozzle. | Invert can and spray until clear propellant appears after each use. If clogged, try soaking nozzle in mineral spirits. |
| Drips or Runs | Applying too much paint in one coat, holding can too close. | Apply thinner coats. Increase spray distance to 8-10 inches. |
Produkt Spesifikaasjes
- Merk: SEM
- Model Namme: Presidio
- Part Number: 15163
- Kleur: Black (Presidio)
- Finish Type: Matte
- Item Form: Aerosol
- Item Volume: 12 Fluid Ounces (340g)
- Spesifike gebrûk: Binnenflakken
- Oanbefelling oerflak: Metal, Plastic, Vinyl
- Spesjale eigenskippen: Fade Resistant, Low VOC
- Dekking: Heech
- Dry Time (Touch): Likernôch 1 oere
- Folsleine genêzingstiid: 24 oeren
- Water Resistance Level: Net wetterbestindich
- Item Gewicht: 1 pûn
- Ofmjittings fan it pakket: 8.11 x 2.56 x 2.56 inch
Warranty Information
No specific warranty information is provided in the product details. For details regarding product warranty, please contact SEM directly or refer to their official website.
Klant Support
For technical assistance, product inquiries, or safety data sheets, please contact the manufacturer:
Fabrikant: SEM
Please visit the official SEM webside foar kontaktgegevens en fierdere boarnen.