Horizon MH-338 Digital Precision Scale User Manual

Produkt oerview

The Horizon MH-338 is a compact digital precision scale designed for accurate measurements up to 200 grams with a 0.01 gram increment. Its design resembles a computer mouse, offering a discreet and portable solution for various weighing needs.

Key Features:

• 200g Capacity with 0.01g Reading Increment
• High Accuracy and Reliability
• Multiple Weighing Modes (g, oz, ct, gn)
• Tare Function for Net Weight Measurement
• Automatyske Power-Off Feature

Opsette

1. Unpacking en ynspeksje

Carefully remove all components from the packaging. Inspect the scale for any signs of damage. The package should include the MH-338 scale, two AAA batteries, and this user manual.

Image: Contents of the Horizon MH-338 scale package, including the scale, batteries, and user manual.

2. Batterij Ynstallaasje

1. Sykje it batterijfak oan 'e ûnderkant fan' e skaal.
2. Slide de batterij compartment cover iepen.
3. Doch twa AAA-batterijen yn, en soargje derfoar dat de polariteit (+/-) goed is.
4. Slút it deksel fan it batterijfak feilich.

Image: The underside of the Horizon MH-338 scale, illustrating the battery compartment for AAA battery installation.

3. Pleatsing

Place the scale on a flat, stable, and vibration-free surface to ensure accurate readings. Avoid placing it near strong electromagnetic fields or extreme temperature changes.

Operaasje

1. Power On / Off

• Om de skaal oan te setten, druk op de [ON/OFF] button. The LCD display will illuminate and show "0.00g".
• Om de skaal út te skeakeljen, druk en hâld de knop yndrukt [ON/OFF] button for a few seconds until the display turns off. The scale also features an automatic power-off function after 90 seconds of inactivity to conserve battery life.

Ofbylding: In detaillearre view of the Horizon MH-338 scale's LCD display and the 'M' (Mode) and 'ON/OFF/T' (Tare/Power) buttons.

2. Unit Seleksje

Druk op de [M] (Mode) button to cycle through the available weighing units: grams (g), ounces (oz), carats (ct), and grains (gn). Select the desired unit before weighing.

3. Tarearfunksje

The Tare function allows you to subtract the weight of a container, so you only measure the net weight of the contents.

1. Plak in lege kontener op it weagplatfoarm.
2. Wait for the display to stabilize, then press the [ON/OFF/T] button. The display will reset to "0.00g" (or the selected unit).
3. Doch de items dy't weage wurde moatte yn 'e kontener. It display sil it nettogewicht fan 'e items sjen litte.

4. Weighing Procedure

1. Ensure the scale is on and displaying "0.00g" (or the selected unit).
2. Gently place the item(s) to be weighed onto the center of the stainless steel weighing platform.
3. Wait for the display to stabilize. The stable weight will be shown on the LCD.

Image: The Horizon MH-338 scale in use, demonstrating the weighing of fine powder in its lid and loose tea leaves on the platform.

Kalibraasje

For optimal accuracy, periodic calibration may be required. Refer to the following general steps for calibration. A 200g calibration weight is typically used for this model.

1. Turn the scale ON and wait for it to display "0.00g".
2. Druk en hâld de [M] (Modus) knop oant "CAL" op it display ferskynt, en lit dan los.
3. Druk op de [M] knop nochris. It display sil it fereaske kalibraasjegewicht knipperje (bygelyks "200.00g").
4. Place the exact calibration weight (e.g., 200g) onto the center of the weighing platform.
5. The display will show "PASS" and then return to normal weighing mode, indicating successful calibration. Remove the weight.

Image: The Horizon MH-338 scale displaying "5.00g" with a small calibration weight placed on its stainless steel platform.

Ûnderhâld

1. Cleaning

Wiskje de skaal mei in bytsje damp cloth. Do not use abrasive cleaners or immerse the scale in water. Keep the weighing platform clean and free of debris.

2. Opslach

Store the scale in a clean, dry environment at room temperature. Avoid extreme temperatures, humidity, and direct sunlight. If storing for extended periods, remove the batteries to prevent leakage.

3. Batterij ferfanging

When the display shows a low battery indicator (e.g., "Lo"), replace both AAA batteries with new ones to ensure continued accurate operation.

Troubleshooting

• "Lo" of lege batterij-yndikator: Ferfang de batterijen mei nije AAA-batterijen.
• "OUE2" or "EEEE": Indicates overload. Remove the item from the platform immediately to prevent damage. The maximum capacity is 200g.
• Unkrekte lêzings:
  • Soargje derfoar dat de skaal op in plat, stabyl oerflak is.
  • Check for any obstructions under or around the platform.
  • Recalibrate the scale if necessary.
  • Ensure the ambient temperature is stable.
• Skaal giet net oan: Kontrolearje de ynstallaasje fan batterijen en soargje derfoar dat de batterijen nij binne en goed ynfoege binne.

Spesifikaasjes

Garânsje en stipe

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Horizon webside. Bewarje jo oankeapbewiis as bewiis fan oankeap.