Ynlieding
This manual provides instructions for the proper installation, operation, and maintenance of the Hager 2500 Series Cylindrical Passage Lock, model 129002. This lock is designed for standard duty commercial applications and is suitable for doors requiring a non-locking function, allowing free passage from either side at all times.
Safety Information
Always wear appropriate safety gear, such as gloves and eye protection, during installation. Ensure all tools are in good working condition. If you are unsure about any step, consult a qualified professional.
Pakketynhâld
Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:
- Hager 2500 Series Cylindrical Passage Lock assembly (Withnell Lever Style)
- Lachmeganisme
- Strike plate (ASA Strike)
- Montage screws
- Operating keys (two supplied, for specific internal components, not for locking function)
- Installation template (if included with physical product)
Opset en ynstallaasje
Follow these steps for proper installation of the Hager 2500 Series Cylindrical Passage Lock.
1. Doar tarieding
Ensure your door is prepared with the following standard dimensions:
- Cross Bore: 2-1/8 inches (54 mm) diameter
- Edge Bore (Latch Hole): 1 inch (25 mm) diameter
- Efterkant: 2-3/4 inch (70 mm)
Use the provided template (if applicable) to mark and drill holes accurately. Incorrect drilling can affect lock function and security.
2. Install Latch Mechanism
- Insert the latch mechanism into the edge bore of the door, ensuring the bevel of the latch bolt faces the door frame.
- Befestigje de grendel mei de levere skroeven.
3. Install Lock Chassis
- Align the lock chassis with the cross bore, ensuring the spindle engages with the latch mechanism.
- Insert the exterior and interior lever assemblies.
- Secure the lock chassis with the through-bolts or mounting screws. The design features no exposed mounting screws for a clean appearance.
4. Ynstallearje de slachplaat
- Mark the position for the ASA strike plate on the door frame, aligning it with the latch bolt.
- Chisel out the mortise for the strike plate to sit flush with the door frame.
- Befestigje de oanslachplaat mei de levere skroeven.
Image 1: Hager 2500 Series Cylindrical Passage Lock, Withnell Lever Style, in Satin Chrome finish. This image shows the complete lever set, including both interior and exterior levers and the cylindrical chassis.
Operating Instructions
The Hager 2500 Series Cylindrical Passage Lock is designed for non-locking applications. It allows free entry and exit at all times.
- To open the door, simply depress the lever handle on either side.
- Release the lever to allow the latch bolt to extend and secure the door in the closed position.
Noat: While two operating keys are supplied, these are typically for internal component access or specific installation adjustments, not for a locking function on a passage set. This lock does not provide security locking.
Ûnderhâld
Regular maintenance ensures the longevity and smooth operation of your lock.
- Reiniging: Meitsje de bûtenste oerflakken skjin mei in sêfte, damp doek. Foarkom skuurmiddels of oplosmiddels, dy't de finish beskeadigje kinne.
- Lubrication: Periodically apply a small amount of graphite-based lubricant to the latch bolt mechanism if it becomes stiff. Do not use oil-based lubricants, as they can attract dust and debris.
- Ynspeksje: Annually inspect all screws and components for tightness. Tighten any loose screws to prevent excessive wear.
Troubleshooting
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| Lever is stiff or hard to turn. | Ophoping fan smoargens of gebrek oan smering. | Clean the mechanism and apply graphite lubricant. |
| De grendelbout giet net folslein yn. | Misalignment of lock components or strike plate. | Check alignment of lock chassis and strike plate. Ensure screws are tight. |
| Door rattles when closed. | Strike plate not properly aligned or mortised. | Adjust the strike plate position or depth to ensure a snug fit with the latch bolt. |
Spesifikaasjes
| Eigenskip | Detail |
|---|---|
| Model Number | 129002 |
| Searje | 2500 rige |
| Slot Type | Cylindrical Passage Lock (Non-locking) |
| Materiaal | Heavy Gauge Steel, Zinc (Handle Material: Zinc) |
| Ein | Satin Chrome |
| Lever Style | Withnell |
| Efterkant | 2-3/4 inch (70 mm) |
| Door Prep - Cross Bore | 2-1/8 inches (54 mm) diameter |
| Door Prep - Latch Hole (Edge Bore) | 1 inch (25 mm) diameter |
| Hand Oriïntaasje | Net-handed |
| Klasse | Grade 2 (Standard Duty Commercial) |
| Strike Plaat | ASA Strike |
| Ynbegrepen komponinten | 2510 WTN US26D (Lock assembly, latch, strike, screws, 2 operating keys) |
Warranty Information
Hager products are manufactured to high standards. For specific warranty terms and conditions applicable to the 2500 Series Cylindrical Passage Lock, please refer to the official Hager website or contact Hager customer support directly. Keep your purchase receipt as proof of purchase.
Klant Support
If you require further assistance or have questions regarding your Hager 2500 Series Cylindrical Passage Lock, please contact Hager customer support:
- Website: Visit the official Hager webside foar stipeboarnen en kontaktgegevens.
- Kontakt: Refer to the packaging or Hager's website for phone numbers or email addresses.
When contacting support, please have your model number (129002) and purchase details available.
