SSV Works WP3-UO4LA

SSV Works WP3-UO4LA Universal Overhead Stereo System

Model: WP3-UO4LA

Ynlieding

This manual provides detailed instructions for the installation, operation, and maintenance of your SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System. This system is designed to deliver high-quality audio in various UTV models, including Kawasaki Teryx 2 and 4, Polaris Ranger 400, 800, and 900XP, Yamaha Viking and Rhino, and Honda Pioneer 700. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

Safety Information

Folgje altyd de folgjende feiligensmaatregels:

  • Ensure the vehicle's ignition is off and the battery is disconnected before beginning any electrical installation.
  • Draach passende feilichheidsklean, ynklusyf eachbeskerming, tidens de ynstallaasje.
  • Verify all wiring connections are secure and properly insulated to prevent short circuits.
  • Do not operate the system at excessively high volumes for extended periods, as this may cause hearing damage.
  • Keep the system clear of obstructions that could impede sound or airflow.
  • Dit produkt befettet gemikaliën dy't bekend binne by de steat Kalifornje om kanker en bertedefekten of oare reproduktive skea te feroarsaakjen. Waskje hannen nei behanneling.

Pakketynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:

  • SSV Works WP3-UO4LA Universal Overhead Stereo System Unit
  • Mounting Hardware (stainless steel)
  • Kabelboerd
  • Ynstallaasje-ynstruksjes (dizze hantlieding)

Ynstallaasje

The SSV Works WP3-UO4LA system is designed for overhead mounting in UTVs. Installation typically takes approximately 15 minutes with basic tools.

SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System

In overhead view of the SSV Works WP3-UO4LA Universal 4 Speaker Overhead Stereo System. The unit features four 6.5-inch marine-grade speakers, two on each side, flanking a central control panel. The control panel includes a digital display for audio functions and buttons for operation. Below the main display, there is an integrated light bar. The entire unit is housed in a black, textured fiberglass enclosure designed for overhead mounting in UTVs.

Montage

  • The system is compatible with roll cages ranging from 51 to 58.75 inches in width.
  • The mounting brackets are adjustable and slide along the back of the sound bar, allowing for flexible positioning (front, overhead, or rear) within the roll cage.
  • Securely attach the unit to the vehicle's roll cage using the provided stainless steel mounting hardware. Ensure all screws are tightened to prevent vibration. Applying thread-locking compound (e.g., Loctite) to screws is recommended to prevent loosening due to vehicle vibration.

Wiring

  • The system requires a simple 2-wire hookup. Connect the positive (+) wire to a switched 12V power source and the negative (-) wire to a reliable ground point on the vehicle chassis.
  • For optimal performance and to prevent Bluetooth disconnection issues when the ignition is turned off, it is recommended to connect the power directly to the battery with an inline fuse, or to a constant 12V source via a separate switch.
  • The built-in 200-watt 4-channel amplifier powers the four 6.5-inch marine-grade speakers. The front two channels are internally configured for the soundbar speakers. The rear two channels are available for powering up to four additional 4-ohm speakers if wired correctly.
  • An optional RCA low-level output is available for system expansion (requires WP-HRCA adapter, sold separately).

Operaasje

Bluetooth-keppeling

  • Power on the stereo system.
  • Navigate to the Bluetooth mode on the system's display.
  • On your smartphone or other Bluetooth-enabled device, search for available Bluetooth devices.
  • Select "SSV Works" (or similar name displayed on the unit) from the list to pair.
  • Once paired, you can stream audio from your device, including music streaming apps like Pandora, Spotify, and SoundCloud.

AM/FM radio

  • Switch the system to AM/FM radio mode.
  • Use the controls on the unit to scan for stations or manually tune to a desired frequency.
  • The system includes an internal FM antenna for local radio reception.

External Audio Output

  • If using the optional RCA low-level output, connect it to an external amplifier or additional speakers as per the WP-HRCA adapter instructions.

Ûnderhâld

The WP3-UO4LA features a durable fiberglass construction and a weatherproof design, allowing it to withstand various environmental conditions.

  • Reiniging: Brûk in sêft, damp cloth to clean the exterior of the unit. Avoid harsh chemicals or abrasive cleaners that could damage the finish or components.
  • Ynspeksje: Periodically check all mounting hardware and wiring connections to ensure they remain secure, especially after off-road use.
  • Opslach: If storing the vehicle for an extended period, ensure the stereo system is powered off.

Troubleshooting

IssueMooglike oarsaakOplossing
Gjin macht oan 'e ienheidLoose wiring connection, blown fuse, incorrect power source.Check all power and ground connections. Inspect the fuse in the wiring harness and replace if necessary. Ensure the power source is providing 12V.
Bluetooth wurdt faak losmakkePower source issues (e.g., connected to a keyed ignition that cuts power), interference.Connect the unit directly to the battery with an inline fuse, or to a constant 12V source via a separate switch. Ensure your device is within range and there are no major sources of interference.
Min radio-ûntfangstWeak signal, environmental factors.The system uses an internal FM antenna. Reception quality can vary based on location and terrain. Try moving to an area with better signal.
It apparaat trilt of rammeltLoose mounting hardware, internal components rattling.Tighten all mounting screws. Consider using thread-locking compound. If internal rattling occurs, contact SSV Works support.
Gjin lûd fan sprekkersFolume te leech, ferkearde boarne selektearre, probleem mei de bedrading fan 'e sprekker.Increase volume. Verify the correct audio source (Bluetooth, AM/FM) is selected. Check speaker connections if accessible.

Spesifikaasjes

EigenskipDetail
Model NumberWP3-UO4LA
MateriaalFiberglas
Speaker TypeCoaxial, 6.5 Inches
AmplibbenerBuilt-in 200 Watt (50 Watts x 4 channels)
KonnektivitätBluetooth, AM/FM Radio
Special FeaturesWetterdicht, radio
Kompatibele apparatenUTV (Kawasaki Teryx, Polaris Ranger, Yamaha Viking & Rhino, Honda Pioneer 700)
Mounting TypeBar Mount (adjustable for 51" - 58.75" width)
Ofmjittings49 x 7 x 11 inch
Item Gewicht26 pûn sterling
AudioútfiermodusStereo
Ferhâlding sinjaal-nei-lûd90 dB
UPC815172011019

Garânsje en stipe

For warranty information and technical support, please refer to the official SSV Works webside of nim direkt kontakt op mei harren klanttsjinst. Bewarje jo oankeapbewiis as bewiis fan oankeap foar alle garânsjeclaims.

Relatearre dokuminten - WP3-UO4LA

Preview UTV Stereo Stage 6 Wiring Diagram for Kawasaki Teryx H2 with Garmin Tread
Detailed wiring diagram and installation guide for the UTV Stereo Stage 6 audio system (UTVS-HS-GRM-S6) in a Kawasaki Teryx H2, featuring the Garmin Tread audio source and UTVS-E1600 50 amplibbener.
Preview 2026+ Kawasaki Teryx H2 Volt Front Bumper Installation Guide
Detailed installation guide for the Elektric Offroad Designs 2026+ Kawasaki Teryx H2 Volt Front Bumper (FWB420001). Includes parts list and step-by-step instructions for mounting.
Preview Kawasaki Teryx Full Cab Enclosure Installation Guide & Care | Over Armour Offroad
Detailed installation instructions, care recommendations, return policy, and warranty information for the Over Armour Offroad Kawasaki Teryx Full Cab Enclosure (KAW-TERYX-FC01).
Preview UTV Stereo Kawasaki Teryx H2 Rear Speaker Adapters UTVS-H2-RSA Installation Guide
Detailed installation guide and warranty information for UTV Stereo's Rear Speaker Adapters (Model UTVS-H2-RSA) for the Kawasaki Teryx H2. Includes parts list, mounting specifications, and step-by-step instructions for audio system upgrades.
Preview SSV Works 250-WP-DF4A Installation Guide for Can-Am Defender
Detailed installation instructions for the SSV Works 250-WP-DF4A Overhead 4-Speaker Sound Bar with JVC Bluetooth Radio for Can-Am Defender HD10 and HD11 models. Includes parts list and tools needed.
Preview UTV Stereo Stage 7 Wiring Diagram for Kawasaki Teryx H2 with Garmin Tread
Detailed wiring diagram for the UTV Stereo Stage 7 audio system in a Kawasaki Teryx H2, featuring the Garmin Tread unit. Outlines connections for amplifiers, speakers, subwoofer, and vehicle power.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.