HOTONE TANLA2

Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head Instruction Manual

1. Ynlieding

Tankewol foar de oankeapasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your amplibbener.

2. Safety Information

  • Power Boarne: Use only the specified power adapter (18V DC, center negative).
  • Ventilaasje: Soargje foar goede fentilaasje om oververhitting te foarkommen. Net blokkearje fentilaasje iepeningen.
  • Focht: Stel it apparaat net bleat oan rein, focht of tefolle luchtvochtigheid.
  • Behanneling: Handle with care. Avoid dropping or subjecting the unit to strong impacts.
  • Betsjinning: Besykje dit apparaat net sels te ûnderhâlden. Lit alle ûnderhâldswurk oer oan kwalifisearre personiel.
  • Luidsprekerferbining: Altyd ferbine de amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.

3. Produkt Overview

The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.

Front Panel Controls

Hotone Nano Legacy Purple Wind front panel controls diagram
Figuer 1: Kontrôles op it foarpaniel. This image displays the front panel of the Hotone Nano Legacy Purple Wind amplifier head, highlighting the input jack, Bass, Middle, Treble, Gain, and Volume knobs, and the On/Off switch.
  1. YNFIER: 1/4" mono jack to plug in your guitar.
  2. BAS: Kontrolearret de lege frekwinsjerespons.
  3. MIDDEN: Kontrolearret de middenfrekwinsjerespons.
  4. TREBLE: Kontrolearret de hege frekwinsjerespons.
  5. WINST: Controls the gain level.
  6. FOLUME: Kontrolearret de útfier folume.
  7. ON/OFF Switch: Powers de ienheid oan of út.

Rear Panel Connections

Hotone Nano Legacy Purple Wind rear panel connections diagram
Figuer 2: Ferbiningen op it efterpaniel. This image shows the rear panel of the Hotone Nano Legacy Purple Wind amplifier head, detailing the 18V DC input, Phones/Line Output, AUX IN, FX Loop Send/Return, and Speaker Output.
  1. 18V DC: Plug in DC 18V adapter (center negative).
  2. TELEFOON/LINE OUTPUT: 1/8" stereo jack, for using headphones or recording.
  3. AUX IN: 1/8" stereo jack, for connecting an external music player.
  4. FX LOOP RETURN: 1/4" mono jack, connect to your effects output jack.
  5. SPEAKER OUTPUT: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
  6. FX LOOP SEND: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp en macht amp).

4. Opsette

  1. Ferbine sprekkerkabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the amplibbener.
  2. Ferbine macht: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
  3. Gitaar ferbine: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
  4. Inisjele ynstellings: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
  5. Power On: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.

5. Bedriuwsinstruksjes

  • Toan oanpasse: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
  • Oanpassing fan winst: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
  • Volume oanpasse: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
  • Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp ôfdieling.
  • Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
  • AUX IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.

6. Underhâld

  • Reiniging: Brûk in sêft, droech doek te skjin de ampbûtenkant fan 'e lifter. Brûk gjin floeibere reinigingsmiddelen of oplosmiddels.
  • Opslach: Bewarje de ampBewarje de lifier op in droech, koel plak, fuort fan direkt sinneljocht en ekstreme temperatueren.
  • Buisfersoarging: As a hybrid ampliifer, de preamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.

7. Probleemoplossing

ProbleemMooglike oarsaakOplossing
Gjin lûdPower not connected, speaker not connected, volume/gain too low, faulty cable.Check power connection, ensure speaker is connected, increase volume/gain, test with different cables.
Swak of ferfoarme lûdFaulty cable, incorrect impedance, worn preamp tube.Test cables, ensure correct speaker impedance, consult technician for tube replacement.
Excessive hum/noiseIerdlus, defekte stroomfoarsjenning, ynterferinsje fan oare elektroanika.Try different power outlets, use a power conditioner, move away from other electronic devices.

8. Spesifikaasjes

  • Output Wattage: 5 watt
  • Power Boarne: Corded Electric (18V DC, center negative)
  • Item Gewicht: 15.5 oz
  • Produkt Ofmjittings: 2.34 x 5.03 x 2.95 inch
  • Kompatibele apparaten: Gitaar
  • Connector Type: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
  • Speaker Impedance: 4-16 ohm
  • Model Oantal: TANLA2

9. Produktfideo's

OriPure 5W Tube Guitar Amplifier Head

Fideobeskriuwing: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.

The Joyo Jackman II Is Like A Tiny Marshall JCM 800.

Fideobeskriuwing: Dizze fideo jout in detaillearre werjefteview and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.

OriPure 15W Tube Guitar Amplifier Head OA-H15

Fideobeskriuwing: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.

JOYO Meteor II BanTamp XL Series Mini Amp Head 20 Watt

Fideobeskriuwing: This video presents the JOYO Meteor II BanTamp XL Series Mini Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.

Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM

Fideobeskriuwing: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.

JOYO 20W Amplifier Head BanTamP Series ATOMIC

Fideobeskriuwing: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.

10. Garânsje en stipe

For warranty information and technical support, please refer to the official Hotone webside of nim kontakt op mei jo autorisearre dealer. Bewarje jo oankeapbewiis as bewiis fan oankeap.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.