Performance Tool W2977 CAN OBD II Scanner Tool User Manual

Produkt oerview

The Performance Tool W2977 CAN OBD II Scanner Tool is an essential diagnostic device for vehicle owners and professionals. It provides a straightforward way to interact with your vehicle's On-Board Diagnostics (OBD-II) system, allowing you to quickly identify and resolve issues indicated by the Check Engine Light.

Key Features:

• Útwreide autodekking: Compatible with most 1996 and newer American, European, and Asian vehicles.
• Powerful Scan Tool: Reads and erases Diagnostic Trouble Codes (DTCs) to pinpoint engine and emissions system problems.
• Brûkerfreonlike ynterface: Simple operation with clear display and intuitive buttons.
• Emissions Readiness Check: Verifies your vehicle's emissions system status for compliance.
• Full OBD2 Protocol Support: Includes support for the Controller Area Network (CAN) protocol.
• Note: Does not work with 2007 Chevy Silverado models.

Setup Guide

Follow these steps to set up and begin using your W2977 CAN OBD II Scanner Tool:

1. Sykje de OBD-II-poarte: De OBD-II-poarte sit meastal ûnder it dashboard oan 'e bestjoerderskant fan 'e auto. Rieplachtsje de hantlieding fan jo auto as jo it net fine kinne.
2. Ferbine de scanner: Plug the scanner's cable connector firmly into the vehicle's OBD-II port. Ensure a secure connection.

Image: Connecting the scanner to the vehicle's OBD-II port.

Image: The W2977 scanner held in hand, connected and ready for use.

Once connected, the scanner will power on automatically. Ensure your vehicle's ignition is in the 'ON' position or the engine is running, as required for proper communication.

Operating Instructions

Diagnostyske probleemkoades (DTC's) lêze

1. With the scanner connected and powered on, the display will show 'C.A.N. OBD2'.


Image: Initial display screen of the scanner.

2. Druk op de YNGEAN button to initiate the scan. The display will show 'SCAN...' as it communicates with the vehicle.
3. Once the scan is complete, the scanner will display 'Menu: 1. DTC'. Press YNGEAN nei view the Diagnostic Trouble Codes.


Image: Menu option to view DTC's.

4. If codes are present, they will be displayed. Use the SCROLL button to navigate through multiple codes if applicable.
5. If 'NO CODES' is displayed, it means no active Diagnostic Trouble Codes are currently stored in the vehicle's computer.


Image: Display indicating no trouble codes found.

Erasing Diagnostyske probleemkoades (DTC's)

Opmerking: Erasing DTCs will turn off the Check Engine Light, but it will not fix the underlying problem. Ensure the issue has been resolved before clearing codes.

1. Brûk fanút it haadmenu de SCROLL button to navigate to 'Menu: 2. ERASE'.


Image: Menu option to erase DTCs.

2. Druk op de YNGEAN button. The scanner will ask 'ERASE? YES NO'.
3. Parse YNGEAN again to confirm 'YES'. The display will show 'ERASE DONE!' indicating the codes have been cleared.

Ûnderhâld

To ensure the longevity and proper functioning of your Performance Tool W2977 scanner, follow these maintenance guidelines:

• Reiniging: Feie it apparaat ôf mei in sêfte, droege doek. Brûk gjin abrasive reinigingsmiddels of oplosmiddels.
• Opslach: Store the scanner in a clean, dry environment away from extreme temperatures and direct sunlight.
• Kabelsoarch: Avoid kinking or sharply bending the cable. Store it neatly coiled to prevent damage.

Troubleshooting

Algemiene problemen:

• 'LINK ERROR!' Displayed:
  This indicates a communication issue between the scanner and the vehicle.


Image: Display indicating a communication error.

• Ensure the scanner cable is securely connected to the OBD-II port.
• Verify the vehicle's ignition is in the 'ON' position or the engine is running.
• Check if your vehicle is compatible with OBD-II (most vehicles 1996 and newer).
• Try connecting the scanner to a different compatible vehicle to rule out a scanner issue.
• Scanner Does Not Power On:
  
  • The scanner draws power from the vehicle's OBD-II port. Ensure the connection is secure.
  • Check the vehicle's fuse for the OBD-II port (often labeled 'CIGAR' or 'AUX POWER').
• No Codes Found, But Check Engine Light is On:
  
  • Some intermittent issues may not store a permanent code immediately. Drive the vehicle for a short period and re-scan.
  • Ensure the vehicle's ignition is on or engine is running during the scan.

Technyske spesifikaasjes

Garânsje en stipe

The Performance Tool W2977 CAN OBD II Scanner Tool comes with a 1-year limited warranty. For detailed warranty information and terms, please refer to the official documentation.

For further assistance, troubleshooting, or to access the complete user manual, please refer to the official PDF document:

Download brûkershânlieding (PDF)

Jo kinne ek besykje de Prestaasjetoolwinkel op Amazon foar mear produktynformaasje en stipeboarnen.