1. Produkt Overview
The GROHE 34562000 Grohtherm 800 is a thermostatic wall-mounted shower mixer designed to provide a consistent and safe showering experience. It incorporates advanced technologies to ensure precise temperature control and water efficiency.
Key Features:
- GROHE TurboStat-technology: Delivers the desired water temperature reliably within a fraction of a second and maintains it consistently.
- SafeStop: A preset temperature limit of 38°C to protect against scalding. Higher temperatures can be selected by deactivating the SafeStop button.
- GROHE EcoJoy with EcoButton: Allows reduction of water consumption by up to 50% at the push of a button, contributing to environmental conservation.
- GROHE StarLight Chrome Finish: A durable, glossy chrome coating that is easy to clean and maintains its shine.
- Ergonomyske handgrepen: Designed for comfortable and easy operation.
- WRAS goedkard: Certified for water regulatory advisory scheme compliance.
2. Safety Information
Lês alle ynstruksjes goed troch foar ynstallaasje en gebrûk. It net folgjen fan dizze ynstruksjes kin liede ta ferwûning of skea oan it produkt.
- Installation should be performed by a qualified professional plumber in accordance with local plumbing and building codes.
- Soargje derfoar dat de haadwetterfoarsjenning ôfsletten is foardat jo begjinne mei ynstallaasje- of ûnderhâldswurk.
- Draach passende persoanlike beskermingsmiddelen, lykas feilichheidsbrillen en wanten, tidens de ynstallaasje.
- Do not modify the product in any way. Use only genuine GROHE replacement parts.
- Keep children away from the installation area and do not allow them to operate the mixer unsupervised.
- Check all connections for leaks after installation and before regular use.
3. Package Ynhâld
Kontrolearje oft alle ûnderdielen oanwêzich en net beskeadige binne foardat jo trochgean mei de ynstallaasje.
- GROHE Grohtherm 800 Thermostatic Wall Mounted Shower Mixer
- Fittings and mounting hardware
- Montage-ynstruksjes (dit dokumint)
4. Ynstallaasje
Professional installation is highly recommended to ensure proper function and compliance with all local regulations. This section provides general guidance.
4.1. Pre-ynstallaasje kontrôles
- Ensure the water supply lines (hot and cold) are correctly positioned and flushed.
- Verify that the wall surface is suitable for mounting and can support the weight of the mixer.
- Confirm the center distance between the hot and cold water inlets matches the mixer's requirements (typically 150mm ± 15mm).
4.2. Mounting the Mixer
Refer to the technical drawing below for critical dimensions and connection points.
Image: Technical drawing illustrating the dimensions and connection points for the GROHE Grohtherm 800 shower mixer. Key dimensions include G 1/2 connections, a diameter of 70mm, a depth of 73mm from the wall, a center distance of 150mm (with a tolerance of +/- 15mm), and a total height of 305mm.
- Install the S-unions (eccentric connectors) into the wall outlets, ensuring they are level and the correct distance apart (150mm center-to-center).
- Apply thread sealant to the S-unions and screw them into the wall connections.
- Attach the cover escutcheons to the S-unions.
- Mount the shower mixer onto the S-unions, ensuring the hot water inlet (usually left) and cold water inlet (usually right) are correctly aligned.
- Tighten the nuts securely, but do not overtighten.
- Open the main water supply and check for any leaks at the connections.
4.3. Post-Installation Appearance
Image: The GROHE Grohtherm 800 Thermostatic Wall Mounted Shower Mixer shown installed on a wall in a modern shower environment, demonstrating its sleek chrome finish and compact design.
5. Operaasje
The Grohtherm 800 mixer is designed for intuitive and safe operation.
5.1. Temperatuer Control
- The temperature is controlled by the right-hand handle. Rotate the handle to adjust the water temperature.
- The mixer features GROHE TurboStat-technology, which quickly reaches and maintains your desired temperature, even with fluctuations in water pressure.
- SafeStop: For safety, the temperature is limited to 38°C. To exceed this temperature, press the SafeStop button located on the temperature handle and then rotate the handle further.
5.2. Water Flow Control
- The water flow is controlled by the left-hand handle. Rotate the handle to increase or decrease the water volume.
- EcoButton: To conserve water, press the EcoButton on the flow handle. This reduces the water flow by up to 50% without compromising the showering experience. To achieve full flow, press the EcoButton and rotate the handle further.
6. Soarch en ûnderhâld
Proper care will ensure the longevity and appearance of your GROHE shower mixer.
6.1. Cleaning
- Clean the mixer with a soft cloth and mild soap or a non-abrasive liquid cleaner specifically designed for chrome finishes.
- Net dwaan use abrasive cleaners, scouring pads, or cleaners containing alcohol, ammonia, or phosphoric acid, as these can damage the chrome finish.
- Spoel goed ôf mei skjin wetter nei it skjinmeitsjen en droegje ôf mei in sêfte doek om wetterflekken te foarkommen.
6.2. Long-Term Care
- Regularly check for any signs of leaks or drips. Address these promptly to prevent water damage.
- If the water flow becomes restricted, check the aerator or shower head for limescale buildup and clean as necessary.
7. Troubleshooting Guide
This section addresses common issues you might encounter with your shower mixer.
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| No hot water or inconsistent temperature | Hot water supply issue, thermostatic cartridge malfunction, or SafeStop engaged. | Check hot water supply. Ensure SafeStop is disengaged if higher temperatures are desired. If problem persists, contact a qualified plumber to inspect the thermostatic cartridge. |
| Lege wetterstream | Limescale buildup in shower head/aerator, partially closed stopcock, or EcoButton engaged. | Clean shower head/aerator. Ensure stopcocks are fully open. Disengage EcoButton for full flow. Check water pressure in the building. |
| Water dripping from mixer | Worn seals or faulty cartridge. | Contact a qualified plumber to replace seals or the cartridge. |
| Mixer is loose on the wall | De montagemoeren binne los. | Carefully tighten the mounting nuts. Do not overtighten. |
For issues not listed here or if solutions do not resolve the problem, please contact a qualified plumber or GROHE customer support.
8. Technyske spesifikaasjes
| Spesifikaasje | Detail |
|---|---|
| Model Number | 34562000 |
| Merk | GROHE |
| Materiaal | Koper |
| Finish Type | Forkromd |
| Kleur | Ferromd |
| Mounting Type | Wall Mount |
| Oantal hânfetten | 2 (one for temperature, one for flow) |
| Item Gewicht | 1 kilogram |
| Ferbinings | G 1/2 (standard) |
| Sintrumôfstân | 150 mm (± 15 mm) |
9. Garânsje en klantestipe
9.1. Warranty Information
Dit GROHE-produkt wurdt levere mei in 5 jier fabryksgarânsje. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use and service.
For full terms and conditions of the warranty, please refer to the official GROHE warranty documentation or visit the GROHE website.
9.2. Klant Support
If you require technical assistance, have questions about installation, or need to make a warranty claim, please contact GROHE customer support through their official webside of de kontaktgegevens dy't jo by jo oankeapdokumintaasje hawwe krigen.
Always provide the model number (34562000) and a detailed description of the issue when contacting support.