LASCO S-1008-3 Harcraft Faucet Stem Assembly User Manual

Ynlieding

This manual provides essential instructions for the installation, operation, and maintenance of the LASCO S-1008-3 Harcraft Faucet Stem Assembly. This product is designed as a replacement part for Harcraft brand faucets, suitable for both hot and cold water applications, featuring a B-Broach type stem.

Safety Information

Kalifornje útstel 65 warskôging: This product may expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands thoroughly after handling this product.

Always turn off the main water supply before attempting any plumbing repairs or installations. Wear appropriate personal protective equipment, such as gloves and eye protection, during installation.

Produkt oerview

The LASCO S-1008-3 is a Harcraft brand faucet stem assembly. It is specifically designed for use in Harcraft faucets and is compatible with both hot and cold water lines. This stem features a B-Broach design, ensuring proper fit and function for compatible faucet models. The product is manufactured in the USA.

Image of the LASCO S-1008-3 Harcraft Faucet Stem Assembly, designed for hot or cold water applications.

Opset en ynstallaasje

1. Wetterfoarsjenning ôfslute: Sykje de haadwetterôfslutklep foar jo hûs of de spesifike ôfslutkleppen foar de kraan dêr't jo oan wurkje. Draai se folslein út.
2. Drainkraan: Iepenje de kraanhendels om alle oerbleaune wetter út 'e liedingen ôf te tappen.
3. Kraanhendel fuortsmite: Depending on your faucet model, remove the decorative cap (if present), then unscrew the handle screw and pull off the handle.
4. Remove Packing Nut: Use an adjustable wrench to carefully loosen and remove the packing nut that secures the old stem in place.
5. Ekstrahearje âlde stam: Carefully pull out the old faucet stem. Note its orientation and any washers or O-rings.
6. Ynspektearje en skjinmeitsje: Inspect the faucet body for any debris or mineral buildup. Clean the area thoroughly before installing the new stem.
7. Nije stiel ynstallearje: Insert the new LASCO S-1008-3 Harcraft Stem Assembly into the faucet body, ensuring it is properly seated.
8. Replace Packing Nut: Hand-tighten the packing nut, then use a wrench to tighten it slightly more, ensuring a snug fit without overtightening.
9. Reattach Handle: Place the faucet handle back onto the stem and secure it with the handle screw. Replace any decorative caps.
10. Wetterfoarsjenning werstelle: Slowly turn the main water supply back on. Check for any leaks around the faucet base and stem.
11. Testkraan: Operate the faucet to ensure proper water flow and temperature control.

Operating Instructions

The LASCO S-1008-3 Harcraft Faucet Stem Assembly functions as the internal mechanism that controls water flow and temperature within your Harcraft faucet. Turning the faucet handle clockwise or counter-clockwise will open or close the water valve, allowing water to flow or stop. For hot/cold applications, the stem's design allows for the appropriate water temperature control when used in its designated hot or cold side.

Ûnderhâld

• Regelmjittige ynspeksje: Periodically check the faucet for any signs of leaks around the handle or spout.
• Ferbinings oanmeitsje: If minor leaks occur, gently tighten the packing nut. Avoid overtightening, which can damage the stem or packing.
• Ferfange Worn Parts: Over time, internal washers or O-rings within the stem assembly may wear out. If persistent leaks or difficulty in turning the handle occur, consider replacing the stem or its internal components.
• Reiniging: Keep the exterior of the faucet clean to prevent mineral buildup that could affect handle operation.

Troubleshooting

Spesifikaasjes

Garânsje en stipe

Garânsje: All Lasco merchandise is warranted to be free of manufacturing defects. The specific warranty period for this product is 1-Year Limited.

Stypje: For any plumbing questions, warranty claims, or defective part replacements, please contact the retail place of purchase directly. They will be able to provide the most accurate and timely assistance.