DYNAUDIO Emit M10 Bookshelf Speaker Instruction Manual

Ynlieding

Thank you for choosing the DYNAUDIO Emit M10 Bookshelf Speakers. The M10 is the most compact model in the Emit range, designed to provide high-end audio performance. These speakers feature a 28 mm soft dome tweeter and a 14 cm MSP (Magnesium Silicate Polymer) mid/bass driver, coupled with a 1st order crossover. The Emit M10 is engineered for easy integration with various amplifiers, offering a 6 ohm impedance and an expertly tuned bass-reflex cabinet for impressive low-frequency response.

This manual provides essential information for the proper setup, operation, and maintenance of your new speakers to ensure optimal performance and longevity.

Wichtige feiligens ynformaasje

• Lês dizze ynstruksjes goed troch foardat jo it produkt brûke.
• Hâld dizze ynstruksjes foar takomstige referinsje.
• Folgje alle warskôgingen op it produkt en yn 'e gebrûksoanwizings.
• Folgje alle ynstruksjes.
• Brûk dit apparaat net tichtby wetter.
• Reinigje allinich mei in droege doek.
• Blokkearje gjin fentilaasje-iepeningen. Ynstallearje neffens de ynstruksjes fan de fabrikant.
• Ynstallearje net yn 'e buert fan waarmteboarnen lykas radiatoren, waarmteregisters, kachels of oare apparaten (ynklusyf amplifters) dy't waarmte produsearje.
• Brûk allinne taheaksels / accessoires spesifisearre troch de fabrikant.
• Ferwize alle service oan kwalifisearre servicepersoniel. Underhâld is nedich as it apparaat op ien of oare manier skansearre is, lykas it netsnoer of de stekker skansearre is, floeistof is ferspile of objekten yn it apparaat fallen binne, it apparaat is bleatsteld oan rein of focht, wurket net normaal , of is fallen.

Pakketynhâld

Carefully unpack your DYNAUDIO Emit M10 speakers and verify that all items are present:

• DYNAUDIO Emit M10 Bookshelf Speakers (Pair)
• Grills (Pair)
• Ynstruksjehânlieding (dit dokumint)

As der items ûntbrekke of skansearre binne, nim dan direkt kontakt op mei jo winkelier.

Opsette

Sprekker pleatsing

Proper speaker placement is crucial for optimal sound quality. Consider the following guidelines:

• Ofstân fan muorren: Bookshelf speakers generally benefit from being placed a short distance from the rear wall to allow the bass-reflex port to function correctly and prevent excessive bass. Experiment with distances from 6 inches to 2 feet (15-60 cm).
• Hichte: Position the speakers so that the tweeters are approximately at ear level when you are seated in your primary listening position. This often means placing them on dedicated speaker stands or sturdy shelves.
• Stereo Triangle: For a stereo setup, place the speakers and your listening position to form an equilateral triangle. The distance between the speakers should be roughly equal to the distance from each speaker to your listening position.
• Toe-in: Experiment with angling the speakers slightly inward towards your listening position (toe-in). This can improve imaging and soundstage fokus.

Ofbylding: Front view of the white DYNAUDIO Emit M10 Bookshelf Speaker with the protective grill attached.

Ofbylding: Front view of the white DYNAUDIO Emit M10 Bookshelf Speaker, showing the tweeter and mid/bass driver without the grill.

Ferbine mei in Amplibbener

The DYNAUDIO Emit M10 speakers are passive speakers and require an external amplifier for operation. Follow these steps to connect your speakers:

1. Útskeakelje: Fersekerje jo amplifier is turned off and unplugged from the power outlet before making any connections.
2. Luidsprekerkabels: Use high-quality speaker cables. Strip approximately 1/2 inch (1.25 cm) of insulation from the ends of the speaker wires. Twist the bare strands tightly.
3. Polariteit: It is critical to connect the speakers with correct polarity. Connect the positive (+) terminal (red) on the speaker to the positive (+) terminal (red) on your amplifier. Similarly, connect the negative (-) terminal (black) on the speaker to the negative (-) terminal (black) on your amplifier. Incorrect polarity will result in poor sound quality, particularly in bass response.
4. Feilige ferbiningen: Unscrew the binding posts on the back of the speaker and amplifier, insert the bare wire or banana plug, and tighten securely. Ensure no stray wire strands are touching other terminals, which could cause a short circuit.

Ofbylding: Efterkant view of the white DYNAUDIO Emit M10 Bookshelf Speaker, highlighting the bass-reflex port and the speaker wire binding posts.

Jo sprekkers betsjinje

Once your speakers are properly connected to an amplifier, you can begin enjoying your audio system.

• Power On: Plug yn en skeakelje dyn amplibbener.
• Volume kontrôle: Begjin mei de amplifier's volume control at its lowest setting and gradually increase it to a comfortable listening level.
• Ynbraakperioade: Like many high-fidelity audio components, your speakers may benefit from a "break-in" period. This typically involves 50-100 hours of normal use, during which the drivers will loosen up and the sound quality may improve further.
• Grills: The included grills protect the speaker drivers. You may choose to use them or remove them for a slightly different aesthetic and potentially a subtle change in sound, though the acoustic impact is generally minimal.

Ûnderhâld

To ensure the longevity and optimal performance of your DYNAUDIO Emit M10 speakers, follow these maintenance guidelines:

• Reiniging: Dust the speaker cabinets regularly with a soft, dry, lint-free cloth. For stubborn marks, lightly dampen the cloth with water, but avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the finish.
• Grills: The speaker grills can be gently cleaned with a soft brush or a vacuum cleaner with a brush attachment.
• Foarkom direkte sinneljocht en waarmte: Do not expose the speakers to direct sunlight for extended periods or place them near heat sources, as this can cause discoloration or damage to the cabinet and drivers.
• Focht: Keep the speakers away from excessive moisture or humidity.
• Beskerming fan bestjoerders: Avoid touching the speaker drivers (tweeter and woofer) directly, as this can cause damage.

Troubleshooting

As jo ​​problemen hawwe mei jo sprekkers, sjoch dan nei de folgjende faak foarkommende problemen en oplossingen:

• Gjin lûd:
  • Fersekerje de amplifier is powered on and connected correctly.
  • Kontrolearje alle ferbiningen fan 'e sprekkerkabel oan beide kanten amplifier and the speakers for secure contact and correct polarity.
  • Verify the correct input source is selected on your amplibbener.
  • Confirm the volume is turned up on the amplibbener.
• Ferfoarme lûd:
  • Ferleegje it folumenivo op jo amplifier. Overdriving the speakers can cause distortion.
  • Kontrolearje de ferbiningen fan 'e sprekkerkabel op losse triedden of koartslutingen.
  • Fersekerje de amplifier's power output is suitable for the speakers (refer to specifications).
  • Kontrolearje de audioboarne op ferfoarming.
• Swakke bas:
  • Verify correct speaker polarity (+ to + and - to -) for both speakers. Incorrect polarity will cause bass cancellation.
  • Experiment with speaker placement, moving them closer to a wall can sometimes increase bass response.
• Uneven lûdentage / Imaging Issues:
  • Ensure speakers are placed symmetrically and at equal distances from the listening position.
  • Adjust speaker toe-in.

If the problem persists, consult your retailer or qualified service personnel.

Spesifikaasjes

Image: Diagram illustrating the dimensions of the black DYNAUDIO Emit M10 Bookshelf Speaker.

Garânsje en stipe

Warranty Information

Your DYNAUDIO Emit M10 Bookshelf Speakers are covered by a FIVE YEAR MANUFACTURER DEFECT WARRANTYDizze garânsje dekt defekten yn materialen en fakmanskip by normaal gebrûk. Bewarje jo bewiis fan oankeap foar garânsjeclaims.

For specific terms and conditions of the warranty, please refer to the documentation provided with your purchase or visit the official DYNAUDIO website.

Klant Support

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact your authorized DYNAUDIO retailer or visit the official DYNAUDIO support website foar fierdere help.

Please have your product model number (EMIT 10) and proof of purchase ready when contacting support.