VALERA X-Master 652.03 Professional Cordless Hair Clipper

1. Ynlieding

Thank you for choosing the VALERA X-Master 652.03 Professional Cordless Hair Clipper. This device is engineered for precision and durability, featuring diamond-sharpened Japanese steel blades. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your hair clipper. Please read it thoroughly before first use and keep it for future reference.

2. Safety Information

WARSKÔGING: To reduce the risk of electric shock, injury, or fire:

• Brûk dit apparaat allinich foar it bedoelde húshâldlik gebrûk lykas beskreaun yn dizze hantlieding.
• Do not use the appliance near water, such as in a bathtub, shower, or sink.
• Avoid direct contact of the blades with skin to prevent irritation, especially during initial uses.
• Hâld it apparaat fuort fan ferwaarme oerflakken.
• Brûk it apparaat nea as it in skansearre snoer of stekker hat, as it net goed wurket, of as it fallen of skansearre is.
• Do not attempt to repair the appliance yourself. Contact authorized service personnel.
• Dit apparaat is net bedoeld foar gebrûk troch persoanen (ynklusyf bern) mei fermindere fysike, sintúchlike of mentale kapasiteiten, of gebrek oan ûnderfining en kennis, útsein as se hawwe krigen tafersjoch of ynstruksje oangeande it brûken fan it apparaat troch in persoan ferantwurdlik foar harren feiligens.
• Bern moatte tafersjoch wurde om te soargjen dat se net mei it apparaat boartsje.
• Lûk de stekker fan it apparaat út it stopkontakt foardat jo skjinmeitsje of ûnderhâld útfiere.

3. Package Ynhâld

Your VALERA X-Master 652.03 package includes:

• VALERA X-Master 652.03 Hair Clipper
• 46 mm Japanese Steel Blade (pre-installed)
• Charging Station with accessory compartment
• Stromadapter
• Guide Combs: 4 mm, 8 mm, 12 mm, 16 mm, 20 mm
• Reinigingsborstel
• Lubricating Oalje
• Instruction Manual

Figure 3.1: Contents of the VALERA X-Master 652.03 package.

4. Produktfunksjes

• Professional Japanese Steel Blades: Diamond-sharpened for a precise and durable cut. (Note: 10 mm and 30 mm blades can be ordered separately).
• Vario-Cut System: Five adjustable cutting lengths (0.8 mm, 1.3 mm, 1.8 mm, 2.4 mm, 3.0 mm) directly on the blade.
• Triedleaze en Corded operaasje: Offers flexibility with 100 minutes of cordless runtime and the option to use while plugged in.
• Universele Voltage: 100-240V for worldwide travel use.
• Ergonomysk ûntwerp: Komfortabel om te hâlden en te brûken.
• Oplaadstasjon: Convenient storage and charging with an accessory compartment.

Figure 4.1: VALERA X-Master 652.03 Hair Clipper overview.

Figure 4.2: Vario-Cut system for adjustable cutting lengths.

Figure 4.3: Dura Blade Japanese Steel blade.

5. Opsette

5.1 Initial Charging

1. Before first use, fully charge the hair clipper for approximately 8-10 hours.
2. Ferbine de stroomadapter mei it oplaadstasjon.
3. Place the hair clipper into the charging station. Ensure the charging indicator light illuminates.
4. The clipper can also be used directly with the power adapter if the battery is depleted.

5.2 Befestigjen fan gidskammen

1. Soargje derfoar dat de tondeuse útskeakele is.
2. Select the desired guide comb (4 mm, 8 mm, 12 mm, 16 mm, or 20 mm).
3. Rjochtsje de liedingskam op it blêd fan 'e tondeuse en druk it stevich oant it fêstklikt.
4. Om te ferwiderjen, lûk de kam foarsichtich fan it blêd ôf.

Figure 5.1: Guide combs in charging station.

6. Bedriuwsinstruksjes

6.1 Adjusting Cutting Length (Vario-Cut System)

1. The clipper features an integrated Vario-Cut system for fine-tuning cutting length without a comb.
2. Locate the adjustment lever on the side of the clipper.
3. Slide the lever to select one of the five cutting lengths: 0.8 mm, 1.3 mm, 1.8 mm, 2.4 mm, or 3.0 mm.
4. Ensure the desired length is securely locked before use.

Figure 6.1: Adjusting the Vario-Cut system.

6.2 Techniken foar hierknippen

1. Soargje derfoar dat it hier skjin en droech is foardat jo it knippe.
2. Foar it bêste resultaat, kam it hier yn 'e rjochting fan groei.
3. Start with a longer guide comb or Vario-Cut setting and gradually reduce the length if desired.
4. Hâld de tondeuse mei it blêd flak tsjin 'e kop.
5. Bewegje de tondeuse stadich tsjin de rjochting fan 'e hiergroei yn.
6. Oerlaapje streken om in evenredige snij te garandearjen.
7. For detailing or shorter cuts, remove the guide comb and use the Vario-Cut system.

Figure 6.2: Demonstrating hair trimming with the clipper.

Figure 6.3: Checking haircut for evenness.

7. Underhâld

7.1 De messen skjinmeitsje

1. Turn off and unplug the clipper from the power source.
2. Ferwiderje alle oanhingjende gidskam.
3. Brûk de bylevere skjinmakborstel om losse hierren fan 'e messen te ferwiderjen.
4. For thorough cleaning, the blade set can be detached. Refer to the diagram in the full manual for specific instructions on blade removal and reattachment.
5. Do not rinse the entire clipper under water. The blades can be carefully rinsed under running water if detached, but ensure they are completely dry before reattaching.

7.2 De messen smeren

1. Nei elk gebrûk, of teminsten ien kear yn 'e moanne, tapasse in pear drippen fan 'e levere smeeroalje op 'e messen.
2. Turn the clipper on for a few seconds to allow the oil to distribute evenly.
3. Wiskje alle oerstallige oalje mei in sêfte doek.
4. Regelmjittige smering soarget foar optimale snijprestaasjes en ferlingt de libbensduur fan it blêd.

7.3 Opslach

• Bewarje de tondeuse en syn accessoires op in droech plak, fuort fan direkt sinneljocht en ekstreme temperatueren.
• Ensure the clipper is turned off and unplugged before storing.
• Use the charging station for organized storage of the clipper and guide combs.

8. Probleemoplossing

9. Spesifikaasjes

10. Garânsje en stipe

For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Valera website.

Fabrikant: De bedriuw Ligo Electric SA