Dial Cooler Controller Model 7617 User Manual
Ferdampende koeler thermostaat
Ynlieding
This manual provides detailed instructions for the installation, operation, and maintenance of your Dial Cooler Controller, Model 7617. Please read this manual thoroughly before installation and use to ensure proper function and safety. This device is designed to control evaporative coolers by regulating temperature.
Safety Information
Belangryk: Always disconnect power to the evaporative cooler before installing, servicing, or cleaning the controller. Failure to do so can result in electrical shock or injury.
- De ynstallaasje moat útfierd wurde troch in kwalifisearre elektricien yn oerienstimming mei alle lokale en nasjonale elektryske foarskriften.
- Betsjinje de controller net mei wiete hannen.
- Soargje derfoar dat alle wiring ferbinings binne feilich en goed isolearre.
- Dit produkt is ûntwurpen foar gebrûk binnen.
Pakketynhâld
Kontrolearje oft alle items yn it pakket oanwêzich binne:
- Dial Cooler Controller (Model 7617)
- Montage beugel
- Installation screws (if included)
Opset en ynstallaasje
Montage de Controller
- Choose a suitable indoor location for surface mounting the controller. The location should be away from direct sunlight, heat sources, and drafts to ensure accurate temperature readings.
- Use the provided mounting bracket as a template to mark the screw holes on the wall.
- Drill pilot holes if necessary and secure the mounting bracket to the wall using appropriate screws.
- Befestigje de controller oan 'e montagebeugel.
Wiring Ynstruksjes
Warskôging: Ensure power is disconnected at the main circuit breaker before proceeding with wiring.
- Identify the power supply wires (230 Volts, Corded Electric) and the evaporative cooler control wires.
- Connect the power supply wires to the designated terminals on the controller. Refer to the wiring diagram provided on the back of the controller or in the packaging for specific terminal assignments.
- Connect the evaporative cooler control wires to the appropriate output terminals on the controller.
- Kontrolearje alle ferbiningen dûbel op strakheid en juste polariteit.
- Once wiring is complete, restore power to the circuit.
Operating Instructions
The Dial Cooler Controller features a manual dial control for temperature and evaporative cooler functions.
Temperatuer kontrôle
- To adjust the desired temperature, rotate the main dial control. The thermostat will activate the evaporative cooler when the ambient temperature rises above the set point and deactivate it when the temperature falls below the set point.
- The display type is manual, indicating the current setting or status through the dial position.
Evaporative Cooler Functions
- The controller is specifically designed for evaporative cooler control, integrating fan and pump operations based on temperature.
- Consult the markings on the dial for specific modes such as 'Fan Only', 'Cool', or 'Off'.
Ûnderhâld
Cleaning
- Before cleaning, ensure the power to the controller and cooler is disconnected.
- Wipe the exterior of the controller with a soft, damp cloth. Do not use abrasive cleaners, solvents, or spray cleaners directly onto the unit.
- Soargje derfoar dat der gjin focht yn 'e ynterne komponinten komt.
Algemiene Soarch
- Periodically check wiring connections for any signs of wear or loosening.
- Keep the controller free from dust and debris to ensure proper airflow and sensor operation.
Troubleshooting
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| De koeler giet net oan. | Gjin stroom nei de controller. Ferkearde wiring. Temperatuer ynstelling te heech. | Kontrolearje de stroomûnderbrekker en de stroomfoarsjenning. Verify wiring connections as per diagram. Lower the temperature setting on the dial. |
| Cooler runs continuously. | Temperatuerynstelling te leech. Sensor malfunction. | Raise the temperature setting on the dial. Nim kontakt op mei klantstipe as it probleem oanhâldt. |
| Unjildich temperatuerlêzing. | Controller exposed to direct sunlight or drafts. | Relocate the controller to a more suitable position. |
Spesifikaasjes
| Eigenskip | Detail |
|---|---|
| Merk | Dial |
| Model Number | 7617 |
| Controller Type | Mechanyske knop |
| Special Feature | Evaporative Cooler Control |
| Kleur | Wyt |
| Temperatuer Control Type | Hantlieding |
| Power Boarne | Corded elektryske |
| Voltage | 230 Volt |
| Display Type | Hantlieding |
| Control Type | Dial Control |
| Control Metoade | Oanreitsje |
| Mounting Type | Surface Mount |
| Backlight | Ja |
| Foarm | Rjochthoekich |
| Produktstyl | Modern |
| Ynbegrepen komponinten | Montage beugel |
| Materiaal Type | Plastic, koper |
| Item Gewicht | 0.01 wyb |
Garânsje en stipe
This Dial Cooler Controller is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, replacement parts, or warranty claims, please contact Dial customer service through their official webside of de kontaktgegevens dy't jo op jo produktferpakking fine.