Ynlieding
This manual provides essential instructions for the safe and efficient use of your Lepro Industrial LED Desk Lamp. Dizze alsidige lamp features an adjustable arm and a sturdy clamp, making it suitable for various environments such as study desks, office workstations, or bedside tables. It is designed to accommodate an E27 bulb (not included), allowing you to choose the light source that best fits your needs.
Lês dizze hantlieding goed troch foar ynstallaasje en gebrûk, en bewarje it foar takomstige referinsje.
Image: The Lepro Industrial LED Desk Lamp providing illumination on a modern desk setup.
Safety Ynstruksjes
- Read all instructions carefully before using the lamp.
- Ensure the power supply is disconnected before installing, cleaning, or replacing the bulb.
- Brûk allinnich E27-fittinglampen mei in maksimum wattagetage fan 40W.
- Brûk de lamp mei in skansearre macht cord of stekker.
- This product is intended for indoor use only. Do not expose to water or high humidity.
- Hâld de lamp fuort fan flammable materialen.
- Net besykje te disassemble of reparearje de lamp josels. Nim kontakt op mei kwalifisearre personiel foar tsjinst.
Pakketynhâld
Kontrolearje asjebleaft it pakket op de folgjende items:
- Lepro Industrial LED Desk Lamp (main unit with clamp)
- User Manual
Opmerking: De E27-lampe is net ynbegrepen en moat apart oanskaft wurde.
Opset en ynstallaasje
Folgje dizze stappen om jo buro te gearstallen en te ynstallearjenamp:
- Befestigje de Clamp: Befestigje de clamp to a desk or shelf edge. The clamp can accommodate surfaces up to 5.4 cm thick. Tighten the screw until the clamp is firmly in place, ensuring stability for both vertical and horizontal mounting.
- Meitsje de Lamp Holle: Ynstallearje de lamp cover onto the upper part of the main unit. Twist the cover in the direction indicated (usually clockwise) to tighten it securely.
- Insert the Arm: Foarsichtich ynfoegje de lamp arm into the designated joint on the clamp base. Ensure it clicks or locks into place for stable positioning.
- Ynstallearje de bulb: Soargje derfoar dat de lamp is unplugged from the power outlet. Screw an E27 base bulb (not included) into the lamp stopkontakt. Net te strak oandraaie.
- Ferbine mei Power: Stek de lamp's netsnoer yn in gaadlik stopkontakt.
Image: The bidirectional clamp allows for both vertical and horizontal mounting on surfaces up to 5.4 cm thick.
Ofbylding: De lamp requires an E27 bulb, which is not included. Various E27 bulb types can be used.
Operating Instructions
Power On/Off: Locate the rocker switch on the power cord. Press the switch to turn the lamp oan of út.
Ljochthoek oanpasse: De lamp features a highly flexible and adjustable arm with multiple joints. You can rotate the lamp head up to 300 degrees and adjust the arm at various angles (e.g., 120 degrees at the main joints, 360 degrees at the base clamp) to direct light precisely where needed. The spring-balanced arm ensures the lamp stays in your desired position.
Ofbylding: De lamp's flexible arm and head allow for multi-angle adjustment to optimize lighting.
Ûnderhâld
Reiniging: Om skjin de lamp, ensure it is unplugged and cool. Wipe the surfaces with a soft, dry cloth. Do not use abrasive cleaners, solvents, or liquids, as these may damage the finish or electrical components.
Bulb ferfanging: Before replacing the bulb, ensure the lamp is unplugged and the old bulb has cooled down completely. Carefully unscrew the old E27 bulb and screw in a new E27 bulb (maximum 40W). Ensure the new bulb is securely seated before plugging the lamp werom yn.
Troubleshooting
- Lamp giet net oan:
- Kontrolearje oft de macht cord is feilich ynstútsenComment yn it stopkontakt.
- Ensure the rocker switch on the cord is in the 'ON' position.
- Verify that the E27 bulb is correctly installed and not faulty. Try testing with a known working bulb.
- Kontrolearje it stopkontakt troch in oar apparaat deryn te stekken.
- It ljocht flikkeret:
- Soargje derfoar dat de lampe goed fêstskroefd is.
- The bulb may be faulty or incompatible. Replace it with a new E27 bulb.
- Check for loose connections in the power cord or outlet.
- Lamp is ynstabyl:
- Soargje derfoar dat de clamp is tightened securely to the desk or surface.
- Verify that the surface thickness is within the maximum 5.4 cm limit for the clamp.
- Kontrolearje dat de lamp arm is properly inserted into the clamp joint.
Spesifikaasjes
| Eigenskip | Spesifikaasje |
|---|---|
| Model Number | 3100027-DW-EU |
| Ofmjittings (L x B x H) | 38 x 15 x 27 sm |
| Gewicht | 900 g |
| Bulb Base | E27 |
| Max Wattage | 40 watt |
| Power Boarne | Corded elektryske |
| Materiaal | Metaal |
| Switch Type | Rocker Switch |
| Voltage | 240 Volt |
| Max Clamp Dikte | 5.4 sm |
| Power Kabel Lengte | Ca. 1.6 meter |
Image: Product dimensions and key features like E27 bulb base and power cord length.
Garânsje en stipe
Garânsje: This Lepro Industrial LED Desk Lamp comes with a 1-year warranty for replacement parts in the EU, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
Klantstipe: For technical assistance, troubleshooting, or warranty claims, please contact Lepro customer support through the retailer where the product was purchased or visit the official Lepro website for contact information. Please have your model number (3100027-DW-EU) and proof of purchase ready when contacting support.