Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Ynlieding

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Safety Information

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

Skeakelje altyd de stroom út by it servicepaniel foardat jo mei elektryske bedrading wurkje.
Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
Net ynstallearje op wiete plakken, útsein as it spesifyk bedoeld is foar sa'n gebrûk.
Soargje derfoar dat alle triedferbiningen feilich en goed isolearre binne.
Test the GFCI outlet monthly to ensure proper operation.

Pakketynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:

Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
Montage Screws
Ynstruksjehânlieding (dit dokumint)

Note: A screwless wall plate is not included and must be purchased separately.

Ynstallaasje

Follow these steps for proper installation of your GFCI outlet:

Strom útsette: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltage tester.
Old Outlet fuortsmite: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
Identifisearje triedden:
- LINE-trieden: These wires bring power from the circuit breaker to the GFCI outlet.
- LAAD Triedden: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
- Ground Wire: Typically bare copper or green insulated.
Connect Wires to GFCI:
- Ferbine de RIGEL wires to the terminals marked "LINE" on the GFCI outlet.
- Ferbine de LADE wires to the terminals marked "LOAD" on the GFCI outlet.
- Ferbine de grûn tried to the green ground screw.
Belangryk: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.
Mount the Outlet: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
Ynstallearje muorreplaat: Attach the screwless wall plate (not included) over the GFCI outlet.
Kracht werstelle: Skeakelje de macht wer op by de circuit breaker.

Ofbylding: Front view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Operaasje

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

RESET knop: After installation or a power outage, press the red RESET button to restore power to the outlet.
TEST knop: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Moanlikse testen:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

Plug alamp or other device into the GFCI outlet and turn it on.
Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
Press the red RESET button. The lamp werom oansette moatte.
As de lamp net út- of oangiet lykas beskreaun, kin de GFCI defekt wêze en moat ferfongen wurde.

Ûnderhâld

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

Keep the outlet clean and free from dust and debris.
Do not paint over the GFCI outlet or its buttons, as this can impair operation.
If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Troubleshooting

Probleem	Mooglike oarsaak	Oplossing
GFCI sil net weromset wurde.	Gjin stroom nei de GFCI. Grûnfout ûntdutsen. Line-load reversal miswire. Faulty GFCI.	Kontrolearje circuit breaker. Unplug all devices from the GFCI and downstream outlets. Try to reset. If it resets, plug devices back in one by one to identify the faulty device. Verify wiring connections (LINE to LINE, LOAD to LOAD). Replace the GFCI.
GFCI rydt faak út.	Defekt apparaat/apparaat. Focht yn it sirkwy. Beskeadige bedrading.	Identify and remove the faulty appliance. Ensure the environment is dry. Rieplachtsje in kwalifisearre elektricien om de bedrading te ynspektearjen.
Gjin stroom nei it stopkontakt.	GFCI ferdwûn. Stroomonderbreker is uitgelopen. Ferkearde wiring.	Druk op de RESET knop. Kontrolearje en reset de circuit breaker. Kontrolearje de bedradingsferbiningen.

Spesifikaasjes

Model: 1597TRW
Merk: Legrand
Kleur: Wyt
Ampleeftiid: 15 Amps
Voltage: 125 Volt
Totale stroomútgongen: 2
Connector Type: Nema 5-15
Materiaal: Metaal
Funksjes: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
UPC: 680147085438
ASIN: B079LTP7Y5

Garânsje en stipe

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official webside of produktferpakking.

Legrand 1597TRW