Ynlieding
Thank you for choosing the Butterfly Eco Smart Plus 25-Litre Air Cooler. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before use and retain them for future reference.
Wichtige Safety Ynstruksjes
Om it risiko op brân, elektryske skok of ferwûning te ferminderjen, folgje altyd basisfeiligensmaatregels by it brûken fan elektryske apparaten. Dit omfettet:
- Soargje derfoar dat de macht oanbod voltage matches the cooler's requirements (220-240 volts).
- Dompel de koeler, it snoer of de stekker net ûnder yn wetter of oare floeistoffen.
- Unplug the cooler from the outlet when not in use, before filling with water, or before cleaning.
- Betsjinje gjin apparaat mei in skansearre snoer of stekker, of neidat it apparaat defekt is of op ien of oare manier skansearre is.
- Keep the cooler on a stable, level surface to prevent tipping.
- Do not block air inlets or outlets. Maintain adequate clearance around the cooler for proper airflow.
- Hâld bern en húsdieren fuort fan 'e koeler tidens gebrûk.
- Do not use the cooler in areas where flammable liquids or gases are stored.
Produkt oerview
Familiarize yourself with the components of your Butterfly Eco Smart Plus Air Cooler.
Ofbylding 1: Front view of the Butterfly Eco Smart Plus 25-Litre Air Cooler. This image shows the main body, front louvers, digital display control panel at the top, and castor wheels at the base.
Ofbylding 2: Angled view of the air cooler, highlighting the top control panel and the included remote control placed on top. The side profile with vertical vents is also visible.
Ofbylding 3: Close-up of the remote control for the air cooler, showing buttons for On/Off, Speed, Mode, Timer, Swing, Ion, and Cool functions.
Ofbylding 4: Rear view of the air cooler with the back panel removed, revealing the honeycomb cooling media. This section is where air is drawn in and cooled by evaporating water.
Key komponinten:
- Digital Display Control Panel: Located on the top, for manual operation.
- Front Louvers: Adjustable for directing airflow. Features both horizontal and vertical louvers for wide air distribution.
- Wettertank: 25-litre capacity, located at the bottom for water storage.
- Honeycomb Cooling Media: Located at the rear, responsible for evaporative cooling.
- Castor Wheels: Foar maklike mobiliteit fan it apparaat.
- Remote Control: Foar handige operaasje fan in ôfstân.
Opsette
- Utpakke: Helje de luchtkoeler foarsichtich út 'e ferpakking. Bewarje alle ferpakkingsmaterialen foar takomstige opslach of ferfier.
- Pleatsing: Place the air cooler on a firm, level surface. For optimal cooling, position the cooler near an open window or door to allow fresh air intake and proper ventilation. Ensure there is at least 20 cm of space around the unit for unobstructed airflow.
- Water filling: Open the water inlet cap, typically located at the top or side. Fill the water tank with clean, fresh water up to the 'MAX' level indicator. Do not overfill. The cooler has a 25-litre capacity.
- Power Connection: Ensure the cooler is switched off before plugging it into a standard 220-240V AC power outlet.
Operating Instructions
Your air cooler can be operated using the control panel on the unit or the remote control.
Control Panel / Remote Control Funksjes:
- Oan/út knop: Press to turn the cooler on or off.
- Snelheidsknop: Syklearret troch 3 fansnelheden: Leech, Middel, Heech.
- Koele knop: Activates the water pump to circulate water over the honeycomb pads for evaporative cooling.
- Swing knop: Activates or deactivates the automatic oscillation of the vertical louvers to distribute air across a wider area. Horizontal louvers can be adjusted manually.
- Mode knop: Selects different operating modes (e.g., Normal, Natural, Sleep, if available).
- Timer knop: Sets an operating duration after which the cooler will automatically turn off.
- Ionenknop: Activates the ionizer function (if available) for air purification.
Inisjele operaasje:
- Stek de macht cord yn in geskikt elektryske outlet.
- Druk op de Oan/út button on the control panel or remote. The unit will start in a default fan speed.
- Druk op de Faasje button to select your desired fan speed (Low, Medium, High).
- For cooling, press the Koel button. You will hear the water pump activate.
- Druk op de Swing button to activate the automatic swing function for wider air distribution.
Ûnderhâld
Regelmjittich ûnderhâld soarget foar optimale prestaasjes en in lange libbensdoer fan jo luchtkoeler.
Daily/Weekly Maintenance:
- Wettertank: Regularly check the water level. For best performance and hygiene, drain and refill the water tank with fresh water every few days, especially if the cooler is used frequently.
- Eksterne reiniging: Wipe de bûtenste oerflakken mei in sêft, damp doek. Brûk gjin abrasive skjinmakkers of solvents.
Monthly/Seasonal Maintenance:
- Honeycomb Cooling Pads: The honeycomb pads can accumulate dust and mineral deposits. To clean, first unplug the cooler. Remove the back panel (refer to Figure 4 for location). Carefully slide out the honeycomb pads. Rinse them under running water to remove dust and deposits. For stubborn deposits, soak them in a mild descaling solution (e.g., vinegar and water) for 30 minutes, then rinse thoroughly. Ensure pads are completely dry before reinserting.
- Wetterpomp: Inspect the water pump and its tubing for any blockages or damage. Clean any debris that may have accumulated.
- Draining: Completely drain the water tank before long periods of non-use or storage.
Opslach:
Before storing the cooler for an extended period, ensure the water tank is empty and clean, and the honeycomb pads are dry. Store the unit in a dry, cool place, preferably in its original packaging.
Troubleshooting
As jo problemen hawwe mei jo luchtkoeler, sjoch dan nei de folgjende faak foarkommende problemen en oplossingen:
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| De koeler giet net oan. | Gjin stroomfoarsjenning; Netsnoer net ynstutsen; Oan/út-knop net yndrukt. | Check power outlet; Ensure cord is securely plugged in; Press the On/Off button. |
| No cool air / Only hot air. | Water tank empty; Cool function not activated; Honeycomb pads clogged; Water pump malfunction. | Fill water tank; Press the Cool button; Clean honeycomb pads; Check water pump for blockages or contact customer service if damaged. |
| Water is not pumping. | Water tank empty; Water pump or tubing blocked/damaged; Cool function not activated. | Ensure water tank is filled; Inspect pump and tubing for blockages; Press the Cool button. If pump is damaged, contact customer service. |
| Cool button blinking. | Low water level indicator. | Refill the water tank to the 'MAX' level. The blinking should stop once sufficient water is detected. |
| Ungewoane lûd ûnder operaasje. | Low water level; Obstruction in fan or pump; Unit not on a level surface. | Check water level and refill if low; Inspect for foreign objects in fan or pump area (unplug first); Ensure cooler is on a stable, flat surface. |
| Remote control wurket net. | Batteries depleted; Obstruction between remote and cooler; Remote not pointed correctly. | Replace batteries; Remove any obstructions; Point remote directly at the cooler's receiver. |
As it probleem oanhâldt nei it besykjen fan dizze oplossingen, nim dan kontakt op mei klanttsjinst.
Spesifikaasjes
- Merk: Flinter
- Model Namme: Eco Smart Plus
- Kapasiteit: 25 liter
- Stromferbrûk: 200 watt
- Operaasje Voltage: 220 - 240 Volt
- Oantal snelheden: 3 (Leech, Medium, Heech)
- Montage Type: Frijsteand
- Spesjale eigenskippen: Compact design, Remote Control, Horizontal and Vertical Louvers, Honeycomb Cooling Media, Digital Display Control Panel
- Kleur: Wyt
Garânsje
This Butterfly Eco Smart Plus Air Cooler comes with a 1-jierrige garânsje on the product from the date of purchase. Please retain your purchase receipt as proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
Klant Support
For any queries, service requests, or technical assistance regarding your Butterfly Eco Smart Plus Air Cooler, please contact Butterfly customer support. Refer to the warranty card or the official Butterfly webside foar de meast aktuele kontaktgegevens.
Noat: Always provide your product model number (Eco Smart Plus) and purchase details when contacting support.