Anderic RRLC16.2

Anderic RRLC16.2 Universal Replacement Remote Control for Sharp Roku TVs

Model: RRLC16.2 | Brand: Anderic

Ynlieding

This manual provides comprehensive instructions for the Anderic RRLC16.2 Universal Replacement Remote Control. Designed specifically for Sharp Roku TVs, this remote offers immediate functionality for compatible Sharp models without requiring any initial programming. It features dedicated shortcut keys for popular streaming services and a secure battery compartment for enhanced durability and safety. For other Roku TV brands or Roku Boxes, programming may be required.

Produkt Features

  • Fully Universal: Compatible with all Roku TVs. Note: Not for Roku Streaming Sticks.
  • Uncompromised Quality: Engineered for superior performance and durability compared to original remotes.
  • Moeiteleaze operaasje: Works identically to the original remote for Sharp Roku TVs without complex setup. (Some shortcut keys may differ).
  • Quick Access to Streaming Services: Dedicated shortcut keys for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.
  • Feilige batterijromte: Includes an optional screw to secure the battery cover, preventing accidental opening.

Opsette

1. Ynstallearje Batterijen

The Anderic RRLC16.2 remote requires two AAA batteries (not included). To install:

  1. Sykje it batterijfak op 'e efterkant fan' e ôfstân.
  2. Slide the battery cover downwards to open.
  3. Doch twa AAA-batterijen yn, en soargje derfoar dat de polariteit (+ en -) goed is.
  4. Replace the battery cover by sliding it upwards until it clicks into place. For added security, use the optional screw to fasten the cover.
Rêch view of Anderic RRLC16.2 remote control showing the battery compartment with an optional screw for securing the cover.

Image: Back of the remote control, highlighting the battery compartment and optional screw.

2. Initial Use (Sharp Roku TVs)

For Sharp Roku TV models (e.g., LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U), the Anderic RRLC16.2 remote is pre-programmed and ready to use immediately after battery installation. No additional setup is required.

3. Programming for Other Roku TVs or Roku Boxes

If you are using the remote with other Roku TV brands (Hisense, Insignia, TCL, Hitachi) or a Roku Box, programming may be necessary. Refer to the "Programming Instructions (via Learning)" section below for detailed steps.

Operating Instructions

Front view of Anderic RRLC16.2 remote control showing all buttons including power, directional pad, OK, back, home, volume, mute, and streaming service shortcuts.

Ofbylding: Front view of the Anderic RRLC16.2 remote control.

  • Power knop (): Located at the top, press to turn your TV on or off.
  • Directional Pad (Purple Arrows) & OK Button: Use the arrow buttons to navigate menus and select options. Press the central "OK" button to confirm selections.
  • Weromknop (): Gean werom nei it foarige skerm of menu.
  • Thús knop (): Giet werom nei it Roku-thússkerm.
  • Volume & Mute Buttons: Located on the side of the remote. Use the volume up/down buttons to adjust audio levels and the mute button to silence audio.
  • Spielje/Pauze, Weromspoelen, Fluch Foarút: Standard media control buttons for content playback.
  • Fluchtoetsen: Dedicated buttons for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.

Kompatibiliteit

The Anderic RRLC16.2 remote control is designed for broad compatibility with Roku TVs. Please review de kompatibiliteitsdetails hjirûnder:

  • Pre-Programmed for Sharp Roku TV Models: LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U.
  • Compatible with Other Roku TV Brands (Requires Programming): Hisense, Insignia, TCL, Hitachi.
  • Compatible with Roku Box (Requires Programming).
  • NOT Compatible with Roku Streaming Sticks.
Compatibility chart for Anderic RR-LC-16.2 remote, showing checkmarks for Sharp Roku TV models and Roku Box (with note for programming), and an X for Roku Stick.

Image: Anderic RR-LC-16.2 Compatibility Chart.

Programming Instructions (via Learning)

This remote can be programmed to work with any TV via the learning method. This method does not require codes. Note: All keys on the RR-LC-16.2 may be learned. Original remote is needed.

  1. Druk en hâld de (Thús) en (Back) keys simultaneously for about 3 seconds. The indicator light will light up and remain on. Release the keys.
  2. Press and release the key to be learned. The indicator light will flash slowly.
  3. Point the original remote control head-to-head with the RR-LC-16.2, making sure the IR (infrared) light bulb at the top edge of the remote aligns directly with the lens on the front of the RR-LC-16.2, with a distance of about 3cm.
  4. Press and hold the key on the original remote that you want the RR-LC-16.2 to learn. The indicator light will flash 3 times to confirm and then remain on, waiting for the next entry.
  5. Herhelje stappen 2-4 om oare kaaien te learen.
  6. Parse (Home) to save and exit, or the remote will exit automatically after 20 seconds.

Weromsette nei Factory Standert Status

Druk en hâld (Thús) en (Back) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. Remote has successfully been reset to factory default status.

Alle Learned Keys wiskje

Druk en hâld (Thús) en (Star) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. All learned keys have been successfully deleted.

Detailed diagram of the Anderic RR-LC-16.2 remote control with programming instructions for various Roku TV brands and Roku Streaming Players.

Image: Anderic RR-LC-16.2 Advanced Universal Operating Guide with programming details.

Spesifikaasjes

Produkt Ofmjittings 5.75 x 1.75 x 1 inch
Item Gewicht 1.76 oz
Item Model Number RRLC16.2
Batterijen 2 AAA-batterijen nedich
Merk Anderic
Special Feature Universeel
Kleur Swart
Maksimum oantal stipe apparaten 2
Kompatibele apparaten Streaming Device, Television

Troubleshooting

  • Remote reagearret net: Soargje derfoar dat de batterijen goed ynstalleare binne en net leech binne. Ferfange as it nedich is.
  • Line of Sight: The remote operates using infrared (IR) technology. Ensure there is a clear line of sight between the remote and your TV's IR receiver.
  • Ferkearde funksjonaliteit: If buttons are not performing as expected, verify compatibility with your specific Roku TV model. For non-Sharp Roku TVs or Roku Boxes, ensure the remote has been correctly programmed using the learning method.
  • Fluchtoetsen wurkje net: While the remote is universal, some shortcut keys may differ from your original remote. Ensure your streaming apps are installed and updated on your Roku TV.

Garânsje en stipe

Anderic products are designed for quality and reliability. For any issues or support inquiries, please refer to the manufacturer's official webside of nim kontakt op mei harren klanttsjinst. Bewarje jo oankeapbewiis foar garânsjeclaims.

Anderic is a registered trademark of Dan's Electronics Etc., Inc. All Rights Reserved. We are not affiliated with Roku. Roku is a registered trademark of Roku Inc.

Foar stipe, besykje: www.anderic.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.