Ynlieding
The CAD TM211 is a high-performance dynamic percussion microphone engineered for optimal sound capture from instruments such as toms, bongos, cajons, and other percussion. Its cardioid polar pattern and wide frequency response make it suitable for various recording and live sound applications. The microphone features a patented integrated drum clip designed for easy and secure attachment, allowing for precise positioning to achieve the desired sound source pick-up angle.
Produkt Features
- Yntegreare klip: Specifically designed for secure attachment to toms, bongos, and cajons.
- Dynamysk elemint: Provides robust sound capture suitable for high sound pressure levels.
- Kardioide polar patroan: Focuses on sound directly in front of the microphone, reducing off-axis noise.
- Wide frekwinsje antwurd: Captures a broad range of frequencies for accurate instrument reproduction.
- Duorsume konstruksje: Built with metal or robust plastic for reliability in various environments.
Opsette
- Attach to Instrument: Position the integrated drum clip onto the rim of your percussion instrument (tom, bongo, cajon). Ensure the clip is securely fastened to prevent movement during performance.
- Mikrofoanhoek oanpasse: Utilize the adjustable mechanism on the clip to angle the microphone head towards the desired sound source area of the instrument. Experiment with different angles to capture the preferred tone and attack.
- Ferbine XLR-kabel: Insert a standard XLR cable into the microphone's XLR connector. Connect the other end of the XLR cable to your mixer, audio interface, or preamplibbener.
- Feilige bekabeling: Route the XLR cable to minimize strain on the connector and prevent accidental dislodging or interference with playing.
Operating Instructions
- Mikrofoan pleatsing: For toms and bongos, aim the microphone towards the center of the drum head for a balanced sound, or closer to the rim for more attack. For cajons, placement near the sound hole or striking surface will yield different tonal characteristics.
- Winne Staging: Pas de ynfierfersterking oan op jo mixer of foarfersterkeramplifier om in sterk sinjaal te berikken sûnder ôf te brekken. Kontrolearje jo nivo's sekuer.
- Polar patroan: The TM211 features a cardioid polar pattern, meaning it is most sensitive to sounds coming from directly in front of it and rejects sounds from the sides and rear. Position the microphone to utilize this characteristic for isolation.
- Frekwinsje antwurd: The microphone is designed with a wide frequency response to accurately capture the full range of percussion instruments. No external equalization is typically required for basic operation, but can be applied for creative sound shaping.
Ûnderhâld
- Reiniging: Use a soft, dry cloth to wipe the microphone body. For the grille, a soft brush can be used to gently remove dust or debris. Avoid using liquid cleaners directly on the microphone.
- Opslach: Store the microphone in a dry, cool place, away from extreme temperatures and humidity. Using a protective case is recommended to prevent physical damage.
- Kabelsoarch: Always grasp the connector, not the cable, when plugging or unplugging XLR cables. Avoid sharp bends or kinks in the cable.
Troubleshooting
- Gjin lûd:
- Soargje derfoar dat alle kabels binne feilich ferbûn.
- Verify the input gain on your mixer/preamp is passend ynsteld.
- Test with a different XLR cable and input channel if possible.
- Minne lûdskwaliteit (ferfoarming, leech folume):
- Check input gain settings; too high can cause distortion, too low can result in a weak signal.
- Ensure microphone placement is optimal for the instrument and not too close, which can cause proximity effect or overload.
- Inspect the microphone grille for any obstructions.
- Mikrofoan bliuwt net op syn plak:
- Ensure the integrated clip is tightened securely to the instrument rim.
- Verify the adjustable angle mechanism is locked in place.
Spesifikaasjes
| Merk | CAD Audio |
| Model Namme | TM211 |
| Oanrikkemandearre Uses | Perkusje-ynstruminten |
| Konnektivität Technology | XLR |
| Connector Type | XLR |
| Special Feature | Yntegreare klip |
| Kompatibele apparaten | Speaker, Radio, Amplifier, Personal Computer (via appropriate interface) |
| Kleur | DONKERGRYS |
| Polar patroan | Unidireksjoneel (kardioïd) |
| Mikrofoanfoarmfaktor | Gooseneck (with integrated clip) |
| Power Boarne | Corded Electric (Phantom power not required for dynamic mic) |
| Ferhâlding sinjaal-nei-lûd | 60 dB |
| Harkbere lûd | 60 Desibel |
| Behuizing Materiaal | Metal Or Robust Plastic |
Wat is yn 'e doaze
- CAD TM211 Dynamic Percussion Microphone (with integrated clip)
Garânsje en stipe
Foar garânsje-ynformaasje en technyske stipe, ferwize asjebleaft nei de offisjele CAD Audio website or contact their customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims. Specific warranty terms and conditions may vary by region and retailer.
Foar fierdere help, besykje de CAD Audio Store.