Hicon Ice Maker with LED Display and 2-in-1 Water Dispenser

Ynlieding

Thank you for choosing the Hicon Ice Maker with 2-in-1 Water Dispenser. This appliance is designed to provide convenient access to ice and cold water. Please read this manual thoroughly before operating the unit to ensure safe and efficient use. Keep this manual for future reference.

Safety Ynstruksjes

• Soargje derfoar dat it apparaat op in stabyl, flak oerflak pleatst wurdt, fuort fan direkt sinneljocht en waarmteboarnen.
• Dompel it apparaat, it netsnoer of de stekker net ûnder yn wetter of oare floeistoffen.
• Hâld bern fuort fan it apparaat tidens wurking.
• Brûk allinich drinkwetter yn 'e iismakker.
• Lûk de stekker fan it apparaat út it stopkontakt foardat jo it skjinmeitsje of as it foar langere perioaden net yn gebrûk is.
• Brûk it apparaat net mei in beskeadige snoer of stekker. Nim kontakt op mei kwalifisearre servicepersoniel foar reparaasjes.
• Ensure proper ventilation around the unit. Maintain at least 10 cm of space around the sides and back.

Produkt oerview

Familiarize yourself with the components of your Hicon Ice Maker.

Figuer 1: Yndieling fan it kontrôlepaniel
This image displays the control panel with buttons for power, ice size selection (Small, Medium, Large), and water dispensing. Indicator lights show when the ice basket is full, water is needed, or the unit is powered on.

Figure 2: Bullet-Shaped Ice Production
The ice maker produces popular bullet-shaped ice cubes, shown here with a water bottle installed on top for automatic water supply.

Opsette

Útpakke en pleatsing

1. Ferwiderje alle ferpakkingsmaterialen en ynspektearje it apparaat op skea.
2. Place the ice maker on a firm, level surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides).
3. Allow the unit to stand upright for at least 2-4 hours before plugging it in, especially if it was transported horizontally. This allows the refrigerant to settle.

Wetter tafoegje

The Hicon Ice Maker offers two methods for water supply:

Figure 3: Water Filling Methods
The left side shows automatic water addition using a 5-gallon bottle. The right side shows manual water addition by pouring water into the reservoir.

1. Automatic Water Supply (using a water bottle): Place a standard 2, 3, or 5-gallon water bottle onto the top dispenser opening. Ensure the bottle is securely seated.
2. Hânlieding wetterfoarsjenning: Open the top lid and pour potable water directly into the water reservoir until it reaches the maximum fill line. Do not overfill.

Noat: The melted ice water is recycled back into the reservoir for subsequent ice production cycles.

Operating Instructions

1. Power On: Plug the appliance into a grounded electrical outlet. Press the ON/OFF button on the control panel to start the unit.
2. Selektearje iisgrutte: Druk op de ICE CUBE SIZE SELECTION button repeatedly to cycle through the available ice sizes: Small (S), Medium (M), and Large (L). The corresponding indicator light will illuminate.
3. Iisproduksje: The unit will begin the ice-making cycle. The first batch of ice may take 6-10 minutes. Subsequent batches will be produced continuously.
4. Ice Full Indicator: As de iismand fol is, de IJS FOL indicator light will illuminate, and the machine will pause ice production. Remove ice to resume operation.
5. Wetter Shortage Yndikator: As it wetterreservoir leech is, dan WATER SHORTAGE indicator light will illuminate. Add more water using either the automatic or manual method.
6. Dispense Cold Water: To dispense cold water, place a glass under the cold water tap and press the WETTER button. The water nozzle can be extended and retracted.
7. Útskeakelje: Druk op de ON/OFF knop om it apparaat út te skeakeljen.

Noat: The ice produced can remain in the basket for approximately 1-2 hours if the machine is turned off, but it is not a freezer and ice will eventually melt.

Ûnderhâld

Cleaning

1. Foardat reiniging: Always unplug the ice maker from the power outlet.
2. Ynterieurreiniging: Remove the ice basket. Clean the interior of the water reservoir and ice-making components with a soft cloth dampmei in mylde reinigingsoplossing ôfspiele. Spoel goed ôf mei skjin wetter.
3. Eksterne reiniging: Feie it bûtenste oerflak ôf mei in sêfte, damp doek. Brûk gjin abrasive skjinmakkers of solvents.
4. Drainage: Periodically drain any remaining water from the reservoir using the drain plug located at the bottom or back of the unit (refer to specific model for exact location).
5. First Use Recommendation: For best taste, clean the unit thoroughly before its first use.

Opslach

If the ice maker will not be used for an extended period, drain all water, clean the unit, and allow it to dry completely before storing in a cool, dry place.

Troubleshooting

Spesifikaasjes

• Merk: Hicon
• Model: B07S3JLSKY
• Produktôfmjittings (D x B x H): 35.7 sm x 42.3 sm x 45.2 sm
• Iisproduksjekapasiteit: Up to 25 kg per 24 hours
• Iis opslachkapasiteit: 1.2 kg
• Wattage: 160 watt
• Voltage: 220 Volt
• Koelmiddel: R600a
• Materiaal Type: Plestik
• UPC: 195893458158

Figuer 4: Produktôfmjittings
This diagram illustrates the physical dimensions of the ice maker for placement and installation planning.

Garânsje en stipe

The Hicon Ice Maker comes with a ien jier garânsje fanôf de datum fan oankeap. Dizze garânsje dekt produksjefouten ûnder normale gebrûksomstannichheden.

For warranty claims, technical support, or any questions regarding your product, please contact Hicon customer service. Please have your model number (B07S3JLSKY) and proof of purchase ready when contacting support.

Hicon has over 10 years of experience in developing ice machines, ensuring advanced ice-making technology and excellent quality.