Ynlieding
This manual provides instructions for the Extreme Networks Summit X460-24p, a high-performance, managed Layer 3 Ethernet switch designed for enterprise and data center environments. It features 24 Gigabit Ethernet ports with Power over Ethernet (PoE) capabilities, along with additional SFP and shared Gigabit SFP ports for flexible connectivity.
Safety Information
Safety Guidelines
- Always disconnect all power supply inputs before removing any panel for servicing.
- This device contains a Class 1 Laser product. Avoid direct eye exposure to beam.
- Soargje foar goede grûn by ynstallaasje.
- Refer to the installation manual for power cord selection and additional compliance markings.
Pakketynhâld
Wat is yn 'e doaze
- Extreme Networks Summit X460-24p Switch
- Netsnoer (regiospesifyk)
- Rack-mounting kit
- Dokumintaasje (dizze hantlieding)
Produkt oerview
The Summit X460-24p switch is designed for efficient network management and high-speed data transfer.
Rear Panel
This image displays the rear panel of the Summit X460-24p switch, highlighting the power input, fan modules, and the SummitStack ports. The overall chassis is purple.
In detaillearre view of the SummitStack ports (Stack Port 1 and Stack Port 2) located on the rear of the switch, used for stacking multiple switches.
Produkt Label
This label provides critical identification information for the switch, including Model: 16403, Summit X460-24p, System No.: 800323-00-03, and Serial No.: 1052G-03941.
Opsjonele komponinten
This image shows the label for an optional Extreme Networks Summit 750W PoE AC Power Supply Unit (PSU), Model 10931, System No. 800382-00-03, Serial No. 1053A-41986.
This image displays the label for an optional Extreme Networks SummitStack Module, Model 16419, System No. 800384-00-01, Serial No. 1122G-02565.
Opsette
Ynstallaasje Guide
Rackmontering
The Summit X460-24p is designed for standard 19-inch rack mounting. Use the provided rack-mounting kit to secure the switch in a server rack. Ensure adequate ventilation around the unit.
Ferbine Power
Connect the power cord to the AC power inlet on the rear of the switch and then to a grounded electrical outlet. The switch will power on automatically.
Ferbine netwurk Kabels
- Connect Ethernet cables from your network devices to the 24 10/100/1000Base-T PoE ports on the front panel.
- For uplink or fiber connections, use the SFP or shared Gigabit SFP ports.
- For stacking, connect SummitStack ports on multiple switches using appropriate stacking cables.
Initial Configuration Access
Access the switch's management interface via a console cable connected to the console port, or through a web browser if the switch has a default IP address configured. Refer to the Extreme Networks documentation for detailed initial setup procedures.
Operating Instructions
Basis Operaasje
Power On/Off
The switch powers on automatically when connected to a power source. To power off, disconnect the power cord. For proper shutdown, it is recommended to use the software-based shutdown command if available.
LED Yndikatoaren
Observe the LED indicators on the front panel for status information regarding power, system health, port activity, and PoE status. Consult the full product documentation for a detailed explanation of each LED's behavior.
Management ynterface
The switch can be managed via a Command Line Interface (CLI) accessible through the console port or Telnet/SSH, or through a web-based graphical user interface (GUI).
Ûnderhâld
Soarch en ûnderhâld
Cleaning
Keep the switch clean and free of dust. Use a soft, dry cloth for external cleaning. Do not use liquid or aerosol cleaners.
Firmware-fernijings
Periodically check the Extreme Networks support webwebside foar firmware-updates om optimale prestaasjes en feiligens te garandearjen. Folgje de opjûne ynstruksjes foar firmware-upgradeprosedueres.
Ventilator- en stroomfoarsjenningsmodules
The switch may feature hot-swappable fan and power supply modules. Refer to the Extreme Networks documentation for instructions on replacement if necessary.
Troubleshooting
Common Issues
Gjin macht
- Soargje derfoar dat it netsnoer goed ferbûn is mei sawol de skeakel as it stopkontakt.
- Ferifiearje dat de macht outlet is funksjoneel.
Port Link Down
- Kontrolearje de ferbining fan 'e Ethernet-kabel oan beide úteinen.
- Kontrolearje oft it ferbûne apparaat oan is en goed wurket.
- Kontrolearje de poartestatus fia de behearynterface.
Problemen mei netwurkferbining
- Verify IP configuration and network settings.
- Check for conflicting IP addresses.
- Consult network diagnostics tools.
Spesifikaasjes
Technyske spesifikaasjes
| Eigenskip | Beskriuwing |
|---|---|
| Model | Summit X460-24p (Part Number: 16403) |
| Ports | 24 x 10/100/1000Base-T PoE+ ports, 4 x shared Gigabit SFP, 4 x SFP |
| Laach | Laach 3 Managed Switch |
| Merk | Ekstreme netwurken |
| Interface Type | PoE, SFP |
| Systeemnûmer | 800323-00-03 |
| Searynûmer | 1052G-03941 |
| UPC | 683332278646 |
Garânsje en stipe
Warranty Information
This product typically comes with a 90-day limited warranty. For specific warranty terms and conditions, please refer to the official Extreme Networks warranty statement or contact your vendor.
Technyske stipe
For technical assistance, visit the official Extreme Networks support website or contact their customer service. Have your product model and serial number ready when seeking support.