Ynlieding
This manual provides detailed instructions for the installation, operation, and maintenance of your APIELE 19mm Momentary Push Button Switch. This high-quality switch features a 12V LED 'Angel Eye' illumination, a durable aluminum alloy shell, and an IP65 waterproof rating, making it suitable for various applications in wet or dusty environments. Please read this manual thoroughly before installation and use.
Produkt Features
- Momentary Action: The switch activates when pressed and held, and deactivates upon release.
- 12V LED Illumination: Integrated 'Angel Eye' LED ring operates on 12V, providing clear visual feedback.
- Duorsume konstruksje: Manufactured with a black aluminum alloy shell for enhanced longevity and resistance.
- IP65 Waterproof Rating: Designed to withstand dust and water splashes, suitable for outdoor and marine applications.
- High Life Expectancy: Rated for 200,000 electrical cycles and 1,000,000 mechanical cycles.
- Independent LED Wiring: The LED can be wired separately from the switch contacts, allowing for flexible indicator light control.
Spesifikaasjes
Image: Detailed dimensions and specifications of the APIELE 19mm Momentary Push Button Switch, showing mounting hole size, operation type, lamp color options, shell material, and lamp voltage.
| Mounting Hole Grutte | 19 mm (3/4 inch) |
| Operaasje Type | Momentary (Push & Hold ON, Release OFF) |
| Kontakt konfiguraasje | 1NO (Normaal iepen) |
| Beskermingsgraad | IP65 (wetter- en stofdicht) |
| Rated Aktueel | 5A |
| Lamp Voltage | 12V DC |
| Shell Materiaal | Aluminiumlegering |
| Elektryske libben | 200,000 syklusen |
| Mechanysk libben | 1,000,000 syklusen |
| Item Ofmjittings (L x B x H) | 40 x 30 x 10 mm |
Image: Illustration of the switch's mechanical and electrical life cycles, highlighting its durability.
Ynstallaasje en opset
Montage
- Ensure the mounting surface is clean and free of obstructions.
- Drill a 19mm (3/4 inch) diameter hole in the desired mounting location.
- Insert the switch body through the drilled hole from the front.
- Secure the switch in place by tightening the included nut onto the threaded body from the rear. Do not overtighten.
Wiring
The switch comes with a wire socket plug for convenient connection. Refer to the diagram below for proper wiring. The LED and switch contacts are independent, allowing for various wiring configurations.
Image: Detailed wiring diagram illustrating the function of each wire color (Yellow: Normal Closed Pin, Blue: Normal Open Pin, Green: Common Pin, Red: Positive LED Pin, Black: Negative LED Pin).
- Griene Wire: Common Pin (C) for the switch contacts.
- Blauwe tried: Normally Open Pin (NO). Connect this to your load's positive input if you want the circuit to close when the button is pressed.
- Gele draad: Normally Closed Pin (NC). This contact opens when the button is pressed. (Note: This specific model is listed as 1NO, so the yellow wire might not be present or functional for this configuration).
- Red Wire: Positive (+) terminal for the 12V LED.
- Swarte draad: Negative (-) terminal for the 12V LED.
Typical Wiring for Momentary ON (Load activates when pressed):
- Connect the positive power supply to the Green (Common) wire.
- Ferbine de Blue (Normally Open) wire to the positive input of your device/load.
- Connect the negative power supply to the negative input of your device/load.
- For LED illumination, connect the Read wire to a 12V positive source and the Swart wire to a 12V negative (ground) source. The LED can be powered independently or in conjunction with the switch operation.
Image: The APIELE 19mm Momentary Push Button Switch shown with its corresponding wire socket plug, facilitating easy and secure connections.
Operaasje
This is a momentary push button switch. To operate:
- Druk en hâld: When the button is pressed and held, the internal contacts close (for the NO configuration), activating the connected device or circuit.
- Release: When the button is released, the internal contacts open, deactivating the connected device or circuit.
- LED-yndikator: The 12V LED ring can be wired to illuminate continuously, only when the switch is pressed, or under separate control, depending on your wiring configuration.
Ûnderhâld
The APIELE push button switch is designed for durability and requires minimal maintenance.
- Reiniging: Periodically wipe the switch surface with a soft, damp doek om stof en smoargens te ferwiderjen. Foarkom it brûken fan agressive gemikaliën of skuurmiddels.
- Ferbining kontrôle: Ensure all wire connections remain secure, especially in environments with vibration or frequent movement.
- Miljeubeskerming: While rated IP65, prolonged submersion or exposure to high-pressure water jets is not recommended.
Image: The APIELE switch demonstrating its IP65 waterproof capabilities, suitable for challenging environments.
Troubleshooting
- Skeakelje apparaat net aktivearjend:
- Verify all wiring connections are correct and secure, especially the Common (Green) and Normally Open (Blue) wires.
- Ensure the power supply to the switch and device is active.
- Check the device itself to ensure it is functioning correctly.
- LED net ferljochtsje:
- Confirm that 12V power is supplied to the LED's Red (+) and Black (-) wires.
- Check for any breaks in the LED wiring.
- While the LED is generally tolerant, ensure correct polarity for optimal performance.
- Loose Switch in Mounting Hole:
- Ensure the mounting hole diameter is exactly 19mm (3/4 inch).
- Tighten the securing nut firmly from the rear of the mounting panel.
Garânsje en stipe
This APIELE push button switch comes with a 3-jierrige garânsje. If the product experiences a non-man-made failure within this period, please contact APIELE customer support for assistance or a replacement.
For any technical inquiries, installation questions, or support needs, please contact APIELE directly through the retailer's platform or the official APIELE website.