Behringer RX1202FX V2 12-Channel Analog Mixer with FX

Ynlieding

The Behringer RX1202FX V2 is a premium 12-input microphone/line mixer designed for professional audio applications. This 3U rack-mountable analog mixer offers ultra-low noise operation and versatile connectivity for various audio setups. It features high-quality XENYX microphone preamps, a warm 2-band 'British' EQ on each channel, and a studio-grade 24-bit multi-FX processor with 100 presets including reverb, chorus, flanger, delay, and pitch shifter.

This manual provides essential information for the safe and efficient operation of your RX1202FX V2 mixer. Please read it thoroughly before use and retain it for future reference.

Wichtige Safety Ynstruksjes

WARSKÔGING: To reduce the risk of electric shock, do not expose this appliance to rain or moisture. Do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

• Lês dizze ynstruksjes.
• Hâld dizze ynstruksjes.
• Let op alle warskôgingen.
• Folgje alle ynstruksjes.
• Brûk dit apparaat net tichtby wetter.
• Reinigje allinich mei in droege doek.
• Net blokkearje gjin fentilaasje iepeningen. Ynstallearje yn oerienstimming mei de fabrikant syn ynstruksjes.
• Ynstallearje net yn 'e buert fan waarmteboarnen lykas radiatoren, waarmteregisters, kachels of oare apparaten (ynklusyf amplifters) dy't waarmte produsearje.
• Net ferslaan it feiligens doel fan de polarized of grounding-type plug. In polarisearre stekker hat twa blêden mei ien breder as de oare. In stekker fan it aardingstype hat twa blêden en in tredde grûnstekker. It brede blêd as de tredde prong binne foar jo feiligens levere. As de foarsjoen stekker net past yn jo outlet, rieplachtsje in elektricien foar ferfanging fan de ferâldere outlet.
• Beskermje it netsnoer om op te rinnen of te knypjen, benammen by stekkers, gemakskontrôles en it punt wêr't se út it apparaat komme.
Brûk allinne taheaksels / accessoires spesifisearre troch de fabrikant.
• Skeakelje dit apparaat út by bliksemstoarmen of as it foar lange perioaden net brûkt wurdt.
• Ferwize alle service oan kwalifisearre servicepersoniel. Underhâld is nedich as it apparaat op ien of oare manier skansearre is, lykas it netsnoer of de stekker skansearre is, floeistof is ferspile of objekten yn it apparaat fallen binne, it apparaat is bleatsteld oan rein of focht, wurket net normaal , of is fallen.

Opsette

1. Unpacking en ynspeksje

Carefully unpack your RX1202FX V2 mixer. Inspect the unit for any signs of damage that may have occurred during transit. Retain the packaging materials for future shipping or if the unit needs to be returned for service.

2. Rack Mounting

The RX1202FX V2 is designed for standard 19-inch rack mounting, occupying 3U of rack space. Ensure adequate ventilation around the unit to prevent overheating. Do not block the ventilation openings.

3. Power Connection

Connect the supplied power cord to the AC/POWER inlet on the rear panel of the mixer and then to a suitable power outlet. Ensure the voltage matches the requirements specified on the unit. The mixer operates at 120 Volts.

4. Ynfier ferbine

The RX1202FX V2 offers 12 input channels:

• Mikrofoanynputs (Kanalen 1-8): Use balanced XLR cables for connecting microphones. These channels feature XENYX preamps.
• Line-ynputs (Kanalen 1-12): Use balanced 1/4" TRS or unbalanced 1/4" TS cables for connecting line-level sources such as keyboards, drum machines, or other audio devices. Channels 9-12 are stereo line inputs.
• CD/Band Ynfier: Connect external playback devices (e.g., CD player, media player) using RCA cables to the CD/TAPE IN jacks.

5. Útfieringen ferbine

• Haadútgongen: Connect your main PA system or recording interface to the MAIN OUT (XLR) jacks.
• Control Room Outputs: Connect your studio monitors to the CTRL OUT (1/4" TRS) jacks.
• Koptelefoonútfier: Connect headphones to the PHONES (1/4" TRS) jack for monitoring.
• Aux-ferstjoeringen: Use the AUX SENDS (1/4" TS) to send signals to external effects processors or monitor mixes.
• Aux Returns: Connect the output of external effects processors to the AUX RETURNS (1/4" TS) jacks.

Byld: Rear panel of the Behringer RX1202FX V2 mixer. This view displays the AC power inlet, power switch, main XLR outputs, control room outputs, monitor outputs, CD/Tape inputs and outputs, Aux sends and returns, and the 8 XLR microphone inputs with corresponding 1/4" line inputs and inserts.

Operating Instructions

1. Oan- / útskeakelje

After all connections are made, press the AC/POWER switch on the rear panel to turn the unit on. Always turn on your mixer before connecting power amplifiers or active speakers, and turn it off after them, to prevent loud thumps.

2. Channel Controls (Channels 1-12)

Byld: Front panel of the Behringer RX1202FX V2 mixer. This view highlights the individual channel strips with Gain, High EQ, Low EQ, MON (Monitor) send, FX send, PAN/BAL, and Level faders. The master section with the FX processor display, program knob, FX to Main/MON controls, CD/Tape controls, and Main Mix/Phones level controls is also visible.

• WINST: Adjusts the input sensitivity for the microphone or line input. Use the CLIP LED as a guide; it should flash only occasionally on the loudest peaks.
• HIGH EQ: Adjusts the high-frequency content of the channel.
• LOW EQ: Adjusts the low-frequency content of the channel.
• MON (Monitor) Send: Controls the amount of signal sent to the monitor output. This is pre-fader.
• FX Stjoer: Controls the amount of signal sent to the internal effects processor. This is post-fader.
• PAN/BAL: Pans the mono signal (channels 1-8) or balances the stereo signal (channels 9-12) across the stereo main mix.
• LEVEL Fader: Past it algemiene útfiernivo fan it kanaal oan oan de haadmiks.
• KLIP LED: Ljochtet op as it ynfiersignaal te heech is, wat oanjout op mooglike ferfoarming. Ferleegje de GAIN as dizze LED faak oanljochtet.

3. Fantoomkrêft (+48V)

For condenser microphones, activate the +48V PHANTOM switch on the rear panel. Ensure microphones are connected before engaging phantom power to prevent damage.

4. FX Processor

The RX1202FX V2 includes a 24-bit multi-effects processor with 100 presets. Use the PROGRAM knob to select the desired effect. The FX TO MAIN and FX TO MON controls in the master section adjust the amount of the effect signal sent to the main mix and monitor mix, respectively.

5. Master Section Controls

• MAIN MIX Fader: Kontrolearret it algemiene útfiernivo fan 'e haadstereomix.
• PHONES/CTRL ROOM Level: Adjusts the output level for the headphones and control room outputs.
• CD/TAPE TO MAIN/CTRL ROOM: Buttons to route the CD/Tape input to the main mix or control room/phones output.

Ûnderhâld

Cleaning

Regularly clean the exterior of the mixer with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Keep faders and knobs free from dust and debris.

Opslach

When not in use for extended periods, store the mixer in a cool, dry environment, away from direct sunlight and extreme temperatures. If rack-mounted, ensure the rack provides adequate protection from dust and physical impact.

Troubleshooting

Spesifikaasjes

Garânsje

Behringer products, distributed by authorized MUSIC Tribe dealers, include a 3-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty information provided with your product or visit the official Behringer website.

Stypje

If you encounter issues not covered in the troubleshooting section, or require further assistance, please contact your authorized Behringer dealer or visit the official Behringer support website for up-to-date information, FAQs, and service contact details.