ANYSECU HB880-K

ANYSECU HB880 Bluetooth Helmet PTT Headset Instruction Manual

Model: HB880-K

1. Ynlieding

The ANYSECU HB880 is a hands-free Bluetooth headset designed for motorcycle helmets, enabling communication with two-way radios and mobile phones. It features Push-to-Talk (PTT) functionality, allowing seamless switching between radio and phone calls, enhancing safety and convenience during rides. This manual provides detailed instructions for installation, operation, and maintenance of your HB880 headset.

2. Package Ynhâld

Before installation, please verify that all items listed below are present in your package:

  • HB880 Bluetooth Main Unit
  • Helmet Speakers (2)
  • Boom mikrofoan
  • Wireless PTT Controller
  • 2-Pin Radio Adapter Cable
  • USB-oplaadkabel
  • Helmet Mounting Bracket (Pinch Cock and Sticker options)
  • Microphone Windshield Foam
ANYSECU HB880 Package Contents

Ofbylding 2.1: Oerview of the ANYSECU HB880 Bluetooth Helmet PTT Headset components, including the main unit, speakers, microphone, wireless PTT controller, and radio adapter.

3. Produkt Overview

The HB880 main unit features intuitive controls for power, volume, and Push-to-Talk (PTT) functions. The wireless PTT controller provides convenient remote activation of the PTT feature.

HB880 Main Unit and Connectivity Diagram

Ofbylding 3.1: Diagram illustrating the HB880 main unit's connections to a mobile phone, wireless PTT controller, and two-way radio.

HB880 Main Unit with Speakers and Microphone

Ofbylding 3.2: The HB880 main unit connected to its helmet speakers and boom microphone.

4. Opset en ynstallaasje

4.1 It apparaat opladen

Before first use, fully charge the HB880 main unit. Connect the USB charging cable to the charging port on the unit and to a standard USB power source. Charging typically takes less than 3 hours. The indicator light will change to show charging status.

4.2 Helm ynstallaasje

Follow these steps to properly install the HB880 headset into your motorcycle helmet:

  1. Choose Affixing Method: Select either the pinch cock clip for thin-shelled helmets or the adhesive sticker for thick-shelled helmets. The pinch cock is easier to remove, while the sticker provides a more permanent fit.
  2. Plak it sokkel: Attach the chosen mounting pedestal to the right side of your helmet. Ensure it is in a position that allows the main unit to be easily accessible and does not obstruct your vision or helmet functionality.
  3. Install Earphones and Microphone: Carefully install the earphones inside the helmet, aligning them with your ears. Route the microphone boom towards your mouth, ensuring it is close for clear voice transmission. Hide excess cable within the helmet lining.
  4. Haadunit oanslute: Slide the HB880 main unit onto the installed pedestal until it locks securely.
Helmet Installation Steps for HB880

Ofbylding 4.1: Step-by-step guide for installing the HB880 Bluetooth headset components into a motorcycle helmet.

HB880 Installed on Helmet with Radio and Remote PTT

Ofbylding 4.2: Visual representation of the HB880 headset installed on a helmet, connected to a two-way radio via adapter, and paired with a wireless PTT controller.

4.3 Connecting to a Two-Way Radio

Use the provided 2-pin adapter cable to connect your HB880 main unit to a compatible two-way radio. Ensure the connection is secure.

4.4 Bluetooth -keppeling

The HB880 supports pairing with both mobile phones and the wireless PTT controller.

  • Pairing mei mobile tillefoan:
    1. Ensure the HB880 is powered off.
    2. Druk op de oan/út-knop en hâld dy yndrukt oant it yndikatorljocht rap knippert, wat de koppelingsmodus oanjout.
    3. On your mobile phone, go to Bluetooth settings and search for "HB880" or a similar device name.
    4. Select the HB880 to pair. Once connected, the indicator light will change.
  • Pairing with Wireless PTT Controller:
    1. Ensure the HB880 is in pairing mode (refer to mobile phone pairing steps).
    2. Activate pairing mode on the wireless PTT controller (refer to its specific instructions, usually a long press of the PTT button).
    3. De apparaten sille automatysk ferbine.

Note: The HB880 can connect to a phone, an adapter, a wireless PTT controller, and a radio simultaneously.

5. Operaasje

5.1 Power On / Off

  • Power On: Press and hold the power button until you hear an audible prompt.
  • Útskeakelje: Press and hold the power button until you hear an audible prompt.

5.2 Volume kontrôle

Use the volume buttons on the HB880 main unit to adjust the audio level. Press the '+' button to increase volume and the '-' button to decrease volume.

5.3 Push-to-Talk (PTT) Funksje

The PTT button on the main unit or the wireless PTT controller activates transmission on your connected two-way radio. Press and hold to transmit, release to listen.

HB880 Main Unit with PTT Button and Motorcycle Rider

Ofbylding 5.1: The HB880 main unit highlighting the PTT button, shown in a motorcycle riding context.

5.4 Kommunikaasje Modes

The HB880 supports multiple communication modes:

  • Tillefoanopropmodus: When a phone call is received, the headset will automatically switch to phone call mode.
  • Radio Priority Mode: Two-way radio signals take priority over other audio sources.
  • Mixed Mode: Allows listening to navigation audio from a phone while maintaining radio communication.

The device features automatic switching between connected devices based on activity.

6. Underhâld

  • Reiniging: Wipe the main unit and other components with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Opslach: Bewarje it apparaat yn in koel, droech plak as it net yn gebrûk is.
  • Batterij soarch: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, especially if stored for extended periods.
  • Microphone Windshield: Ensure the microphone windshield foam is securely attached to prevent it from falling off during use.

7. Probleemoplossing

Probleem Mooglike oarsaak Oplossing
Gjin stroom / Apparaat giet net oan Lege batterij Laden it apparaat folslein.
Cannot pair with phone/PTT controller Device not in pairing mode; previously paired device interfering Ensure HB880 is in pairing mode. Disconnect or "forget" previous pairings on your phone/controller and try again.
Lege audio folume Volume set too low; poor speaker placement Increase volume using the '+' button. Ensure speakers are positioned directly over your ears inside the helmet.
Intermittent audio / Poor connection Loose cable connections; interference Check all cable connections (speakers, microphone, radio adapter). Ensure devices are within Bluetooth range.
Knoppen reagearje net Knop fêst of net goed Gently check if the button is physically stuck. If the issue persists, contact customer support.
Microphone foam falls off Losse fit Secure the foam windshield more firmly, possibly using a small rubber band if necessary.

8. Spesifikaasjes

  • Model: HB880-K
  • Bluetooth ferzje: V4.1 Class2
  • Operaasjegebiet: 10 meter (33 feet)
  • Bluetooth Profiles: HFP, HSP, PTT
  • Sprektiid: Likernôch 50 oeren
  • Standby tiid: Likernôch 300 oeren
  • Oplaadtiid: Minder as 3 oeren
  • Ofmjittings (haad ienheid): Likernôch 5.91 x 3.15 x 3.94 inch
  • Fabrikant: Anysecu
  • UPC: 049500289744
HB880 Features and Specifications Summary

Ofbylding 8.1: Summary of key features and specifications for the HB880 headset.

9. Garânsje en stipe

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.