Franke 115.0600.095
FRANKE 115.0600.095 Centro Kitchen Faucet Instruction Manual
Ynlieding
This manual provides detailed instructions for the installation, operation, and maintenance of your FRANKE 115.0600.095 Centro Kitchen Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Safety Information
Belangryk: Always turn off the main water supply before beginning any installation or maintenance work on the faucet. It is recommended that installation be performed by a qualified plumber to ensure compliance with local plumbing codes and safety standards. Use appropriate tools and wear protective gear during installation.
- Soargje derfoar dat alle ferbiningen feilich binne om lekken te foarkommen.
- Do not overtighten connections, as this may damage components.
- Protect the faucet's chrome finish from abrasive materials or harsh chemicals.
Pakketynhâld
Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:
- FRANKE 115.0600.095 Centro Kitchen Faucet
- Montage hardware
- Ferbining slangen
Opset en ynstallaasje
The FRANKE 115.0600.095 Centro Kitchen Faucet is designed for deck mounting with a single hole installation. Follow these general steps for installation:
- Bereid de montage oerflak: Ensure the sink or countertop has a mounting hole with a diameter of Ø35 mm. The maximum deck thickness should be considered for proper installation.
- Ynstallearje de kraan: Insert the faucet body into the mounting hole. Secure it from underneath the sink using the provided mounting hardware (washer and nut). Ensure the faucet is oriented correctly before fully tightening.
- Ferbine wetterliedingen: Attach the hot and cold water supply lines to the corresponding inlets on the faucet. Connect the other ends to your hot and cold water supply valves. Hand-tighten first, then use a wrench for a quarter turn to ensure a leak-free seal.
- Kontrolearje op lekken: Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, tighten the connections slightly until the leak stops.

A detailed technical diagram providing all necessary measurements and installation specifications for the faucet. Note the Ø35 mm mounting hole and 150° spout rotation.
Operating Instructions
The FRANKE 115.0600.095 Centro Kitchen Faucet features a single mixer lever positioned at the top for easy control of water flow and temperature. The spout has a fixed position but offers a 150° rotation for convenience.
- Wetterstream en temperatuerkontrôle: Move the lever upwards to increase water flow and downwards to decrease it. Move the lever left for hot water and right for cold water.
- Water Saving Technology: This faucet incorporates a two-stage flow reduction system. When opening the lever, it will initially stop at a halfway point, naturally limiting water flow to reduce consumption by up to 50%. For a full flow, simply push the lever further upwards past this resistance point.
- Laminar Jet: The special design of the aerator provides a compact and crystal-clear water stream, significantly reducing splashing during use.
- Rotaasje fan 'e tút: The faucet spout can be rotated up to 150 degrees, allowing for flexible use across different sink bowls or areas.

The faucet is shown installed in a kitchen environment, highlighting its design and functionality in a typical setting.

Dizze ôfbylding toant in detaillearre view of the faucet's aerator, which produces a compact and splash-reducing laminar water stream.
Ûnderhâld en soarch
To maintain the appearance and functionality of your FRANKE 115.0600.095 Centro Kitchen Faucet, follow these care guidelines:
- De finish skjinmeitsje: Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Foarkom hurde gemikaliën: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol, as these can damage the chrome finish and internal components.
- Beluchtingsreiniging: If water flow becomes restricted, the aerator may be clogged with mineral deposits. Unscrew the aerator from the spout, clean it under running water, and remove any debris. Reassemble the aerator securely.
Troubleshooting
As jo problemen hawwe mei jo kraan, sjoch dan nei de folgjende faak foarkommende problemen en oplossingen:
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| Lege wetterstream | Ferstoppe beluchter of diels sluten oanfierklep. | Clean the aerator (see Maintenance section). Ensure water supply valves are fully open. |
| Lekken fan ferbiningen | Losse ferbiningen of beskeadige dichtingen. | Turn off water supply. Carefully tighten connections. Inspect and replace seals if damaged. |
| Dripping from spout | Versleten keramyske cartridge. | Contact Franke customer support for a replacement ceramic cartridge. |
Spesifikaasjes
- Model Oantal: 115.0600.095
- Type: High-pressure mixer faucet
- Ein: Chrome
- Cartridge: Ceramic cartridge Ø 35 mm
- Mixer Lever Position: Top
- Rotaasje fan 'e tút: 150°
- Montagegat diameter: Ø 35 mm
- Soart tút: Fêste tút
- Materiaal (Handgreep/Hendel): Keramyk
- Produkt Ofmjittings: 23.7 x 25.3 x 5 sm (sawat)
- Item Gewicht: 2.33 kg
- Spesjale eigenskippen: Water Saving Technology, Laminar Jet
Garânsje en stipe
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Franke website. Contact Franke customer service for assistance with parts, service, or any questions not covered in this manual.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.