SHARDOR Electric Conical Burr Coffee Grinder Instruction Manual

1. Ynlieding

Thank you for choosing the SHARDOR Electric Conical Burr Coffee Grinder. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new appliance. Please read these instructions thoroughly before first use and retain them for future reference.

2. Wichtige Safety Ynstruksjes

By it brûken fan elektryske apparaten moatte basisfeiligens foarsoarchsmaatregels altyd wurde folge, ynklusyf de folgjende:

• Lês alle ynstruksjes foardat jo de molen yn gebrûk nimme.
• Dompel de motorbasis net yn wetter of oare floeistoffen.
• Trek de stekker út 'e stopkontakt as net yn gebrûk, foardat it gearstallen of disassemble dielen, en foar skjinmeitsjen.
• Foarkom kontakt mei bewegende dielen.
• Betsjinje gjin apparaat mei in skansearre snoer of stekker, of neidat it apparaat defekt is of op ien of oare manier is fallen of beskeadige.
• It brûken fan taheaksels net oanrikkemandearre of ferkocht troch de fabrikant kin feroarsaakje brân, elektryske skok, of blessuere.
• Brûk net bûten.
• Lit it snoer net oer de râne fan tafel of oanrjocht hingje, of oanreitsje waarme oerflakken.
• Net pleatse op of tichtby in heule gas- of elektryske burner, of yn in ferwaarme oven.
• Always check for the presence of foreign objects in the bean hopper before use.
• Dit apparaat is allinich foar húshâldlik gebrûk.

3. Produkt Overview

Components

Familiarize yourself with the parts of your SHARDOR coffee grinder:

Ofbylding: Eksplodearre view showing the lid, coffee grounds residual cleaner, bean hopper, removable upper conical burr, grinding settings, coffee dosing rings, grinding chamber lid, grinding chamber, and cleaning brush.

• Lid: Covers the bean hopper.
• Coffee Grounds Residual Cleaner: Helps clear remaining grounds.
• Bean Hopper: Hâldt hiele kofjebeanen.
• Removable Upper Conical Burr: The top grinding component, removable for cleaning.
• Grinding Settings Dial: Past de fynens fan 'e slyp oan.
• Coffee Dosing Rings (x2): Adapters for direct grinding into portafilters.
• Grinding Chamber Lid: Covers the grinding chamber.
• Slypkeamer: Sammelet gemalen kofje.
• Reinigingsborstel: For maintenance of the burrs and grinding area.
• LCD Display: Shows grind time and settings.
• Kontrôle knoppen: For adjusting time and starting/stopping the grinding process.

4. Opsette

1. Utpakke: Ferwiderje alle komponinten foarsichtich út 'e ferpakking.
2. Skjin: Wash the bean hopper lid, grinding chamber lid, grinding chamber, and dosing rings in warm, soapy water. Rinse thoroughly and dry completely. The main unit and burrs should not be immersed in water; wipe them with a damp doek.
3. Sammelje: Place the grinding chamber into its position on the main unit. Ensure the removable upper conical burr is securely in place. Attach the bean hopper and its lid.
4. Posysje: Plak de slypmasine op in stabyl, flak en droech oerflak.
5. Ferbine: Stek de macht cord yn in geskikt elektryske outlet.

5. Bedriuwsinstruksjes

5.1 Maalynstellingen

The grinder offers 31 precise grind settings, allowing you to customize the fineness for various brewing methods. Rotate the grinding settings dial to select your desired grind level.

Image: Visual guide to grind settings, indicating coarse for French Press (31-25), medium-coarse for Pour Over (25-20), medium for Drip Coffee (20-10) and Siphon (10-5), and fine for Espresso (5-1).

• Fine (1-5): Ideaal foar espressomasines.
• Medium (5-20): Suitable for Siphon, Drip Coffee, and Pour Over methods.
• Coarse (20-31): Recommended for French Press.

5.2 Using the Digital Timer and Display

The grinder features an intelligent LCD display and a precise digital timer, allowing you to set grinding time in 0.1-second increments. It also has a memory function to recall your last setting.

Image: Close-up of the grinder's control panel, showing the digital LCD display, a 'Time -' button, a 'Start/Stop' button, and a 'Time +' button. The display shows '5.1' seconds.

• Time "-" button: Press to decrease grinding time. Long press for rapid reduction.
• Time "+" button: Press to increase grinding time. Long press for rapid increase.
• Start/stop knop: Initiates or halts the grinding process.
• For times under 10 seconds, each press adjusts by 0.1 seconds.
• For times over 10 seconds, each press adjusts by 1 second.
• De maksimale grinding tiid is 40 sekonden.

5.3 Slypproses

1. Beanen tafoegje: Pour whole coffee beans into the bean hopper. Do not overfill.
2. Select Grind: Rotate the grinding settings dial to your desired fineness (refer to section 5.1).
3. Ynstelle tiid: Use the "+" and "-" buttons to set the desired grinding duration on the LCD display.
4. Start grinding: Press the Start/Stop button to begin grinding. The grinder will automatically stop once the set time is reached.
5. For Espresso: The grinder includes two portafilter dosing rings (51mm and 58mm) to allow direct grinding into your espresso machine's portafilter, minimizing mess.

Image: The SHARDOR coffee grinder shown with a portafilter attached, demonstrating direct grinding. Two dosing rings (51mm and 58mm) are also visible.

6. Underhâld en Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your grinder. Always unplug the grinder before cleaning.

6.1 Cleaning the Burr Grinder

The high-quality conical burr grinder is designed for uniform grinding and flavor preservation. Keep it clean to prevent clogging and maintain performance.

Ofbylding: In close-up view of the conical burr mechanism with coffee beans inside, highlighting the grinding components.

1. Boppeste burr fuortsmite: Twist the upper conical burr counter-clockwise and lift it out.
2. Borstel skjinmeitsje: Use the provided cleaning brush to remove any coffee grounds from the upper and lower burrs.
3. Wiskje basis: Wipe the interior of the grinding chamber and the exterior of the main unit with a dry or slightly damp cloth. Do not rinse the main unit or burrs with water.
4. Reassemble: Insert the upper conical burr back into place and twist clockwise until it locks.

6.2 Cleaning the Collecting Box

The anti-static collecting box is designed to prevent coffee powder from clinging to its sides, making it easy to pour.

Image: A hand pressing down on the top of the grinder, indicating the use of the coffee grounds residual cleaner to dislodge trapped grounds.

• Remove the grinding chamber and its lid.
• Empty any ground coffee.
• Wash the grinding chamber and lid with warm, soapy water. Rinse thoroughly and dry completely before reassembling.
• To reduce powder clogging, at the end of each grinding cycle, gently tap the coffee grounds residual cleaner on the bean hopper lid to dislodge any remaining grounds from the burrs.

7. Probleemoplossing

Sjoch de tabel hjirûnder foar faak foarkommende problemen en har oplossingen.

8. Spesifikaasjes

9. Garânsje en klantestipe

SHARDOR products are manufactured to high-quality standards. For warranty information, technical support, or any questions regarding your product, please refer to the warranty card included with your purchase or visit the official SHARDOR website. Please have your model number (B099WNLCCT) and purchase details ready when contacting support.