Bimar HP126 Ceramic Column Heater User Manual

Ynlieding

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Bimar HP126 Ceramic Column Heater. Please read this manual thoroughly before using the appliance and retain it for future reference.

Wichtige Safety Ynstruksjes

By it brûken fan elektryske apparaten moatte basisfoarsoarchsmaatregels altyd wurde folge om it risiko fan brân, elektryske skok en ferwûnings oan persoanen te ferminderjen, ynklusyf de folgjende:

• Lês alle ynstruksjes foardat jo dizze kachel brûke.
• Dizze kachel is hyt as yn gebrûk. Om brânwûnen te foarkommen, lit bleate hûd gjin hite oerflakken oanreitsje.
• Ekstreem foarsichtich is nedich as elke kachel wurdt brûkt troch of yn 'e buert fan bern of invaliden en wannear't de kachel operearjend en sûnder tafersjoch bliuwt.
• Skeakelje de kachel altyd út as net yn gebrûk.
• Bedriuw gjin kachel mei in beskeadige snoer of stekker, of neidat de kachel defekt is, is op ien of oare manier sakke of skansearre.
• Brûk net bûten.
• Dizze kachel is net bedoeld foar gebrûk yn badkeamers, waskgebieten en ferlykbere lokaasjes binnen. Sykje noait kachel wêr't hy kin falle yn in bad of in oare wetterkontener.
• Net rinne cord ûnder tapijten. Bedek it snoer net mei smyt tapijten, runners, of ferlykbere bedekkingen. Arrangearje snoer fuort fan ferkearsgebiet en wêr't it net oerstrike sil.
• Om de kachel út te skeakeljen, set de kontrôles op OFF, en helje dan de stekker út it stopkontakt.
• Net ynfoegje of tastean frjemde foarwerpen te fieren eltse fentilaasje of exhaust iepening as dit kin feroarsaakje in elektryske skok of fjoer, of beskeadigje de kachel.
• Om in mooglike brân te foarkommen, blokkearje gjin luchtyntaken of útlaat op ien of oare manier. Net brûke op sêfte oerflakken, lykas in bêd, dêr't iepeningen kinne wurde blokkearre.
• In kachel hat waarme en arcing of sparking dielen binnen. Brûk it net yn gebieten dêr't benzine, ferve, of flammable floeistoffen wurde brûkt of opslein.
• Brûk dizze kachel allinich lykas beskreaun yn dizze hantlieding. Elk oar gebrûk dat net wurdt oanrikkemandearre troch de fabrikant kin brân, elektryske skok, of ferwûnings oan persoanen feroarsaakje.
• Stek de kachels altyd direkt yn in muorre-outlet / bak. Nea brûke mei in útwreidingssnoer of ferpleatsbere krêftkraan (outlet / power strip).
• This heater includes an automatic tip-over switch for safety. If the heater is accidentally knocked over, it will automatically shut off.

Produkt oerview

The Bimar HP126 is a ceramic column heater designed for efficient heating with multiple control options, including voice control.

Components

• Keramyske ferwaarming elemint
• Control Panel mei Digital Display
• Remote Control
• Oscillaasje funksje
• Tip-over feiligens switch

Visual Reference

Ofbylding 1: Front view of the Bimar HP126 Ceramic Column Heater, showing the digital display and control buttons at the top.

Ofbylding 2: Front view of the Bimar HP126 Ceramic Column Heater, illustrating its approximate dimensions: 67cm height and 25cm width/depth at the base.

Ofbylding 3: Side view of the Bimar HP126 Ceramic Column Heater, showing its slim profile.

Ofbylding 4: Rear view of the Bimar HP126 Ceramic Column Heater, showing the main power switch at the bottom.

Ofbylding 5: Remote control for the Bimar HP126, featuring buttons for Power, Mode, Temperature Up/Down, Timer, and Oscillation.

Opsette

1. Utpakke: Helje de kachel foarsichtich út 'e ferpakking. Bewarje de ferpakking foar opslach of ferfier.
2. Pleatsing: Place the heater on a firm, level surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper air circulation and to prevent fire hazards. Do not place it near curtains, furniture, or other flammable materials.
3. Power Connection: Ensure the main power switch on the back of the heater is in the OFF position. Plug the power cord into a suitable 240V electrical outlet. Do not use extension cords.
4. Initial Power On: Flip the main power switch on the back of the heater to the ON position. The heater will enter standby mode.

Operating Instructions

Control Panel Operaasje

The heater can be operated using the touch-sensitive control panel located on the top of the unit.

• Power knop (⏻): Press to turn the heater ON or OFF from standby mode.
• Modusknop (☵): Press to cycle through heating modes (e.g., Low Heat, High Heat, Fan Only).
• Temperatuer omheech (+) / Omleech (-) Knoppen: Adjust the desired temperature setting between 15°C and 40°C.
• Timerknop (⏰): Set the operating timer for up to 12 hours. Each press increases the timer by one hour.
• Oscillaasjeknop (↻): Activate or deactivate the automatic oscillation function to distribute heat across a wider area.

Remote Control Operaasje

The included remote control provides the same functionality as the control panel.

• Ensure batteries are correctly inserted into the remote control.
• Point the remote control towards the heater's display panel for optimal response.
• Buttons on the remote correspond to the functions described for the control panel: ON/OFF, MODE, UP, DOWN, TIMER, WING (Oscillation).

Voice and App Control

The Bimar HP126 heater supports voice control via Alexa and Google Assistant, and can be managed through a dedicated smartphone application.

1. Download de app: Download the Bimar smart home application from your device's app store (compatible with iOS and Android devices).
2. Pairing: Follow the in-app instructions to pair your Bimar HP126 heater with your smartphone. This typically involves putting the heater into pairing mode (refer to app for specific steps).
3. Ferbine mei stimassistint: Once paired with the app, link the Bimar app to your Alexa or Google Assistant account through their respective applications.
4. Stim kommando's: You can now use voice commands to control the heater, such as turning it on/off, adjusting temperature, changing modes, or setting the timer.
5. Avansearre funksjes: The app allows for scheduling heating periods (0-12 hours timer), sharing device control with multiple users, and integration with IFTTT for advanced automation.

Ûnderhâld

Regelmjittich ûnderhâld soarget foar de lange libbensdoer en effisjinte wurking fan jo kachel.

• Reiniging:
  • Doch altyd de stekker fan 'e kachel út it stopkontakt en lit it folslein ôfkuolje foardat jo it skjinmeitsje.
  • Brûk in sêft, damp doek om de bûtenste oerflakken fan 'e kachel ôf te feegjen. Brûk gjin skurende reinigingsmiddels of oplosmiddels.
  • Brûk in stofzuiger mei in boarsteltaheaksel om stof fan 'e loftintake- en útlaatroosters te ferwiderjen.
  • Dompel de kachel net yn wetter en lit der gjin wetter yn 'e binnenkant dripje.
• Opslach:
  • As jo ​​de kachel foar in langere perioade opslaan, meitsje him dan goed skjin.
  • Bewarje de kachel yn 'e orizjinele ferpakking op in koel, droech plak.
  • Plak gjin swiere foarwerpen boppe op 'e kachel tidens opslach.

Troubleshooting

Foardat jo kontakt opnimme mei de klanttsjinst, rieplachtsje asjebleaft de folgjende hantlieding foar probleemoplossing foar faak foarkommende problemen.

Spesifikaasjes

Garânsje en stipe

The Bimar HP126 Ceramic Column Heater is covered by an official 24-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

For warranty claims, technical support, or any inquiries regarding your product, please contact Bimar customer service. Please have your purchase receipt and product model number (HP126) available when contacting support.

You can find more information and contact details on the official Bimar webwebside of fia jo winkelier.