Ynlieding
This instruction manual provides detailed guidance for the assembly, safe operation, and maintenance of your ZINUS Shalini Upholstered Fabric Bed Frame. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and to maximize the lifespan of your product. Keep this manual for future reference.
Safety Information
- Always use a mattress with a thickness of 15 cm (6 inches) or more to ensure the longevity and structural integrity of the bed frame.
- Do not use a futon directly on the bed frame. Direct body pressure on the slats may lead to damage.
- Avoid jumping on the bed frame or concentrating weight on a single point, as this can cause damage to the frame.
- Assembly is recommended for two or more adults.
- During assembly, ensure sufficient space and protect the floor with a mat or similar material.
- This product is intended for household furniture use. Do not use it for purposes other than its original intent, as this may lead to unexpected accidents or injuries.
Pakketynhâld
Before beginning assembly, verify that all parts listed below are present and undamaged. Some screw parts may be pre-installed on the main unit; please check in advance.
Image: All components of the bed frame laid out for assembly, including the headboard, side rails, center support, and hardware.
Refer to the assembly video for a visual guide to all included parts.
Montage ynstruksjes
Estimated assembly time: 30-50 minutes (2 adults recommended). All necessary tools are included.
Step 1: Attach Headboard Legs
Secure the headboard legs to the main headboard panel using the provided bolts and washers. Ensure they are tightly fastened.
Image: A person attaching the headboard legs to the headboard using an Allen wrench, bolts, and washers.
Step 2: Assemble Side Rails
Connect the two sections of each side rail and attach the corner brackets and support legs. Ensure all connections are secure.
Image: A person attaching a corner bracket to a side rail section using bolts and an Allen wrench.
Step 3: Connect Side Rails to Headboard
Align the side rails with the headboard legs and secure them using the provided hardware. Repeat for both sides.
Image: A person securing a side rail to a headboard leg using an Allen wrench.
Stap 4: Ynstallearje de sintrale stipebalke
Assemble the center support bar and attach it to the side rails. This provides crucial stability for the bed frame.
Image: A person fastening the center support bar to the bed frame using an Allen wrench.
Step 5: Place Slats
Unroll the wooden slats and place them evenly across the bed frame. Secure them in place using the provided fasteners. The slats include silent tape for noise reduction.
Image: A person securing a wooden slat to the bed frame with a plastic fastener.
Gearstalling fideogids
For a comprehensive visual guide, please watch the official assembly video:
Video: Detailed assembly instructions for a fabric bed frame, demonstrating each step from unboxing to final setup. This video is provided by YaheetechJP.
Operating Instructions
Once assembled, your ZINUS Shalini bed frame is ready for use. Place your mattress (minimum 15cm thickness recommended) directly onto the wooden slats. The design provides robust support and ventilation for your mattress.
Image: A fully assembled ZINUS Shalini bed frame in light gray with a diamond-quilted headboard, complete with a mattress and bedding, ready for use.
The bed frame features 16cm of under-bed storage space, ideal for storing clothes or other items in bins or containers.
Image: A ZINUS Shalini bed frame with a mattress and bedding, highlighting the available space underneath the bed for storage.
Ûnderhâld
To keep your bed frame in optimal condition:
- Reiniging: Wipe the frame with a dry cloth to remove dust. For fabric parts, use a soft brush or vacuum cleaner to remove dust and debris. Spot clean any stains with a mild fabric cleaner, testing on an inconspicuous area first.
- Regelmjittige kontrôles: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent squeaking.
- Ventilaasje: Ensure adequate air circulation around and under the bed to prevent moisture buildup, especially in humid environments.
Troubleshooting
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| It bêdframe is wankel of piept. | Losse bouten of ferbiningen. | Check and re-tighten all bolts and screws using the provided Allen wrench. Ensure all parts are correctly aligned. |
| Slats are moving or making noise. | Slats not properly secured or silent tape worn. | Ensure all slats are correctly seated in their positions and fasteners are tight. The slats are equipped with silent tape to minimize noise. |
| Untbrekkende ûnderdielen of beskeadige komponinten by oankomst. | Produksjefout of ferstjoerskea. | Contact ZINUS customer support immediately with your purchase details for assistance. |
Spesifikaasjes
| Eigenskip | Detail |
|---|---|
| Model | AJ-FDPB-LG-D |
| Grutte | Dûbel |
| Algemiene produktôfmjittings (L x B x H) | 195 cm x 140 cm x 102.7 cm (with headboard) |
| Ofmjittings fan it bêdframe (L x B x H) | 195 cm x 140 cm x 35 cm (without headboard) |
| Opslachhichte ûnder it bêd | 16 sm |
| Produkt Gewicht | 36.8 kg |
| Maksimaal oanrikkemandearre gewichtskapasiteit | 180 kg |
| Main Materialen | Steel, Plywood, Polyester, High-density Urethane |
| Slatten | Wooden slats with silent tape |
| Kleur | Ljochtgriis |
| Styl | Diamond Quilt Upholstered |
Image: A diagram illustrating the dimensions of the Shalini Fabric Bed Frame for Single, Semi-Double, and Double sizes, including height, width, and length measurements.
Warranty Information
ZINUS provides a 5 jier fabryksgarânsje for this product. This warranty covers manufacturing defects for both mattresses and frames, ensuring peace of mind for our customers. Please retain your proof of purchase for warranty claims.
Image: A green circular badge indicating "WARRANTY 5 YEAR QUALITY ASSURANCE" with the ZINUS logo.
Klant Support
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact ZINUS customer support. For the most up-to-date contact information, please visit the official ZINUS webside of ferwize nei jo oankeapdokumintaasje.
Online resources and FAQs may also be available on the ZINUS brand store page: ZINUS Brand Store
