Wallpad L6

Wallpad L6 Gold Brushed Aluminum Wall Module User Manual

Model: L6 - Dual USB Charging Module

1. Ynlieding

This manual provides detailed instructions for the installation, operation, and maintenance of the Wallpad L6 Gold Brushed Aluminum Wall Module, specifically the dual USB charging variant. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Safety Ynstruksjes

  • Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations.
  • Skeakelje altyd de stroom út by de stroomûnderbrekker foardat jo de module ynstallearje of ûnderhâlde.
  • Net ynstallearje yn wiet of damp lokaasjes.
  • Soargje derfoar dat alle wiring ferbinings binne feilich en goed isolearre.
  • Do not exceed the specified electrical ratings of the module.
  • Hâld bûten it berik fan bern.

3. Package Ynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:

  • Wallpad L6 Gold Brushed Aluminum Wall Module (Dual USB Charging)
  • Montage Screws
  • User Manual (dit dokumint)

Note: Other modules (e.g., EU French Socket, Wall Switch) are sold separately and may have different installation requirements.

4. Opset en ynstallaasje

This section outlines the general steps for installing the Wallpad L6 module. Professional installation is recommended.

  1. Tariede it ynstallaasjegebiet: Soargje derfoar dat de stroomfoarsjenning nei it ynstallaasjegebiet útskeakele is by de haadstroomûnderbrekker.
  2. Ferifiearje kompatibiliteit: The Wallpad L6 module is designed for an 86 Type Square Box. Round boxes are not compatible.
  3. Ferbine wiring: Connect the live, neutral, and ground wires to the corresponding terminals on the back of the module. Refer to the wiring diagram provided with the product packaging for specific connections.
  4. De module ynstallearje: Carefully place the module into the 86 Type Square Box. Secure it using the provided mounting screws. Ensure the module is flush with the wall surface.
  5. Gesichtsplaat befestigje: Secure the brushed aluminum faceplate onto the module.
  6. Kracht werstelle: Sadree't de ynstallaasje foltôge is en alle ferbiningen feilich binne, werstel de stroom by de stroomûnderbrekker.
Rêch view of Wallpad L6 module with dimensions and an 86 Type Square Box

Ofbylding 4.1: Rêch view of the Wallpad L6 module showing dimensions (86mm x 86mm, 60mm depth, 66.5mm screw distance) and an 86 Type Square Box. This module requires an 86 Type Square Box for proper installation; round boxes are not compatible.

5. Operating Instructions (Dual USB Charging Module)

The Wallpad L6 Dual USB Charging Module provides convenient power for charging compatible devices.

Front view of Wallpad L6 dual USB charging module with a red indicator light

Ofbylding 5.1: Front view of the Wallpad L6 dual USB charging module. It features two USB-A ports and a red LED indicator light at the top.

  1. Apparaat ferbine: Plug your USB charging cable into one of the two USB-A ports on the module.
  2. Oplaadyndikaasje: The red indicator light (if present and active) will illuminate to show that the module is powered and ready to charge.
  3. Opladen: Connect the other end of your USB cable to your compatible electronic device (e.g., smartphone, tablet). The device should begin charging automatically.
  4. Ferbine: Once charging is complete, safely disconnect your device and then the USB cable from the module.

Note: The Wallpad L6 series also offers other modules like EU French Sockets and Wall Switches, which operate according to their specific functions. The images below illustrate examples of these other modules within the L6 series.

Wallpad L6 EU French Socket module installed in a room setting

Ofbylding 5.2: In eksample of a Wallpad L6 EU French Socket module, showcasing its design within a living space.

Wallpad L6 wall switch module with a satin aluminum panel and illuminated buttons

Ofbylding 5.3: In eksample of a Wallpad L6 wall switch module, featuring a satin aluminum panel and illuminated touch buttons.

6. Underhâld

  • Reiniging: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the module. Do not use abrasive cleaners, solvents, or excessive moisture.
  • Ynspeksje: Periodically inspect the module for any signs of damage, loose connections, or discoloration. If any issues are found, disconnect power and consult a qualified electrician.

7. Probleemoplossing

ProbleemMooglike oarsaakOplossing
Module not charging devices.
  • Gjin stroom nei de module.
  • Defekt USB-kabel of apparaat.
  • Overload beskerming aktivearre.
  • Kontrolearje de stroomûnderbrekker en soargje derfoar dat de stroom oan is.
  • Besykje in oare USB-kabel of apparaat.
  • Disconnect devices, wait a few minutes, then reconnect.
Module is loose in the wall.Ferkearde mounting.Disconnect power, tighten mounting screws. Ensure an 86 Type Square Box is used.
Red indicator light is off.Gjin stroom nei de module.Check circuit breaker and wiring connections. Consult a qualified electrician if necessary.

8. Spesifikaasjes

  • Model: Wallpad L6 (Dual USB Charging)
  • Materiaal: Gold Brushed Aluminum Panel
  • Kompatibiliteit: 86 Type Square Box
  • Ofmjittings: Approximately 86mm x 86mm (Front Panel)
  • USB-útfier: Please refer to product packaging for exact USB output specifications.
  • Datum earst beskikber: 4 april 2024

9. Garânsje en stipe

For warranty information and technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

For further assistance, you may visit the official Wallpad website of nim kontakt op mei harren klanteservice ôfdieling.

© 2024 Wallpad. All rights reserved.