Atlanta Digital LED Alarm Clock 2604/0 User Manual

Ynlieding

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Opsette

1. Power Connection

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. Batterij-reservekopy

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

Ofbylding: Efterkant view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

Operating Instructions

1. De tiid ynstelle

1. Druk en hâld de TIID SET button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. Brûk de 12/24 oere button (left side of the back panel) to adjust the hours.
3. Druk op de TIID SET button again to switch to minute adjustment. Use the 12/24 oere knop om de minuten oan te passen.
4. Druk op de TIID SET knop nochris om te befêstigjen en de tiidynstellingsmodus te ferlitten.

Om te wikseljen tusken 12-oere en 24-oere werjefteformaten, druk koart op de 12/24 oere button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. It alarm ynstelle

The clock supports two separate alarms.

1. Druk en hâld de ALARM SET button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. Brûk de 12/24 oere button to adjust the alarm hours.
3. Druk op de ALARM SET button again to switch to minute adjustment. Use the 12/24 oere knop om de alarmminuten oan te passen.
4. Druk op de ALARM SET button once more to confirm and exit alarm setting mode.
5. Om in alarm te aktivearjen of te deaktivearjen, druk koart op de AL. ON/OFF button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

It alarm hat in Crescendo function, meaning the alarm sound starts softly and gradually increases in intensity.

3. Snooze-funksje

As it alarm ôfgiet, druk dan op de grutte knop SNOOZE button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. Display Brightness Oanpassing

Pas de helderheid fan it skerm oan mei de DIMMER slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. Alarm Volume Adjustment

Adjust the alarm sound volume using the FOLUME slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. USB Charging Port

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

Ûnderhâld

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Hâld it apparaat fuort fan wetter en hege vochtigheid.
• Foarkom dat de klok bleatsteld wurdt oan direkt sinneljocht of ekstreme temperatueren.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

Troubleshooting

Display is too bright or too dim:

Oanpasse de DIMMER slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

Alarm giet net ôf:

• Check if the alarm is activated using the AL. ON/OFF button. An indicator should be visible on the display.
• Fersekerje de FOLUME slider is not set to "LOW" or minimum.
• Kontrolearje oft de alarmtiid goed ynsteld is.

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

Spesifikaasjes

Garânsje en stipe

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.