Feit Electric LED Security Light Instruction Manual

1. Ynlieding

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH). This outdoor flood light features an adjustable three-head design, motion sensor, and dusk-to-dawn functionality, providing 5000 lumens of 5000K Daylight illumination.

Please read these instructions thoroughly before installation and retain this manual for future reference.

2. Safety Information

WARSKÔGING: Risiko op elektryske skok. Skeakelje de stroom út by de zekering of stroomûnderbrekker foardat jo ynstallearje of ûnderhâld dogge.

• Ensure the electrical supply is turned off before beginning installation.
• Dit produkt moat wurde ynstalleare yn oerienstimming mei de jildende ynstallaasjekoade troch in persoan dy't bekend is mei de bou en wurking fan it produkt en de belutsen gefaren.
• Brûk allinich UL/cUL-listed triedferbiningen.
• Besykje it apparaat net te feroarjen. Elke oanpassing kin de garânsje ûnjildich meitsje en in feilichheidsrisiko feroarsaakje.
• The LED light source is integrated and cannot be replaced.

3. Package Ynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:

• 1 x Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH)
• Montagemateriaal (skroeven, triedmoeren)

Image 3.1: Packaging of the Feit Electric LED Security Light, showing the product and key features.

4. Ynstallaasje ynstruksjes

This fixture is designed for wall-mount installation and requires hardwiring.

4.1 Benodigde ark (net ynbegrepen)

• Phillips holle skroevedraaier
• Draadstrippers
• Pliers
• Elektryske tape
• Feiligensbril

4.2 Montage fan de fixture

1. Skeakelje de stroom út by de circuit breaker of lontkast.
2. Remove the existing fixture (if applicable) and its mounting bracket.
3. Attach the new mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
4. Feed the electrical wires from the junction box through the center hole of the mounting plate.

Image 4.1: Diagram illustrating the hands-free wiring and mounting back plate for easy installation.

4.3 Wiring the Fixture

1. Ferbine de swarte tried fan 'e fixture mei de swarte (hjitte) tried fan' e junction box mei in triedmoer.
2. Ferbine de wite tried fan 'e fixture mei de wite (neutrale) tried fan 'e junction box mei in triedmoer.
3. Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box using a wire nut.
4. Plak alle draden foarsichtich yn 'e junction box.

4.4 De fixture befeiligje

1. Align the fixture with the mounting plate and secure it with the provided screws.
2. Ensure the fixture is flush against the mounting surface to prevent water intrusion.
3. Adjust the three light heads to direct illumination as desired. The heads are adjustable to provide up to 270 degrees of light coverage.

Image 4.2: The security light showing its adjustable heads and the motion and dusk-to-dawn sensor controls.

Image 4.3: The Feit Electric LED Security Light installed on an exterior wall, providing bright illumination at night.

5. Bedriuwsinstruksjes

This security light features both a motion sensor and a dusk-to-dawn sensor for automated operation.

5.1 Funksjonaliteit fan bewegingssensor

• The integrated motion sensor detects movement up to 60 feet away.
• When motion is detected at night, the light will activate.
• The duration the light stays on after motion detection can be adjusted using the 'TIMER' dial on the sensor.
• The sensitivity of the motion sensor can be adjusted using the 'SENSITIVITY' dial to control the detection range.

5.2 Dusk-to-Dawn Functionality

• The built-in photocell sensor automatically turns the light on at dusk and off at dawn.
• This feature works in conjunction with the motion sensor, ensuring the light only activates when needed during nighttime hours.
• An 'Auto Dusk 'til Dawn override' feature is available, allowing the fixture to remain on continuously from dusk to dawn if desired. Consult the sensor control diagram for specific settings.

Image 5.1: Comparison showing the Feit Electric LED Security Light operating with its Dusk-to-Dawn feature, turning on automatically at night and off at dawn.

5.3 Helderheid Oanpassing

The light output is dimmable from 500 lumens to 5000 lumens. This adjustment is typically controlled via the sensor unit, allowing you to set the desired brightness level for your security needs.

Image 5.2: Diagram illustrating the wide-beam optics of the security light, showing effective illumination distances at various heights.

6. Underhâld

The Feit Electric LED Security Light is designed for long-lasting, maintenance-free operation. The integrated LEDs have an average life of 50,000 hours and do not require replacement.

6.1 Cleaning

• To clean the fixture, ensure power is off at the circuit breaker.
• Wipe de bûtenkant mei in sêft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Keep the motion sensor lens clean to ensure optimal performance.

Image 6.1: The security light is shown enduring rain, highlighting its all-weather cast aluminum housing and wet-location rating (IP65).

7. Probleemoplossing

8. Spesifikaasjes

Image 8.1: Visual representation of key specifications including dimensions, CCT, wattage, brightness, life hours, IP rating, and voltage.

Image 8.2: The security light installed on a garage, featuring the Energy Star certification logo, indicating energy efficiency.

9. Garânsje en stipe

9.1 Warranty Information

According to the product information, there is no specific warranty description provided for this product.

9.2 Customer Support

For technical assistance or further inquiries, please visit the Feit Electric website or contact their customer service department. Refer to the product packaging for the most current contact information.