Ynlieding
Thank you for choosing the WORKPRO LED Work Light (Model W130016A). This versatile and durable work light is designed to provide bright, reliable illumination for a wide range of tasks and environments. Featuring multiple light modes, a rotatable stand, strong magnetic base, and power bank functionality, it is an essential tool for professionals and DIY enthusiasts alike. Please read this manual carefully before use to ensure proper operation and maintenance.
Figure 1: WORKPRO LED Work Light (Model W130016A)
Produkt Features
- Fjouwer ljochtmodi: High, Medium, Low, and Flashing modes to suit various lighting requirements.
- 180° draaibere stand: Adjustable stand with 7 locking positions allows for precise light angle adjustment.
- Rechargeable & Power Bank Function: Equipped with two built-in 3.7V, 2000mAh batteries. Features a Type-C input for charging the light and a USB-A output to function as a power bank for other devices.
- Sterke magnetyske basis: Four N42 magnets on the back allow secure attachment to metal surfaces, providing hands-free operation.
- Duorsume konstruksje: Made from Acrylonitrile Butadiene Styrene (ABS) and metal with TPR soft rubber for corrosion, wear, and impact resistance.
- Waterproof & Shockproof: Designed to withstand challenging environments, passing high and low temperature tests.
Figuer 2: Wichtige funksjes oerview
Ynstelling en opladen
Inisjele lading
Before first use, fully charge the WORKPRO LED Work Light. Connect the provided Type-C charging cable to the light's input port and to a compatible USB power adapter (not included). The charging indicator light will show red during charging and turn green when fully charged. A full charge typically takes approximately 3 hours.
Power Bank Funksje
To use the work light as a power bank, open the protective cover on the back of the light. Connect your device's charging cable to the USB-A output port on the work light. The output indicator light will show blue when charging an external device.
Figure 3: Charging Ports and Power Bank Function
Figure 4: Power Bank in Use
Operating Instructions
Power On / Off en Mode Seleksje
Locate the power button on the back of the work light. Press the button once to turn the light on to the High brightness mode. Subsequent presses will cycle through the modes in the following order: High > Medium > Low > Flashing. To turn the light off, press and hold the power button for 2 seconds, or cycle through all modes until the light turns off.
Figure 5: Light Modes and Operation
Adjusting the Stand and Magnetic Mounting
The integrated stand can be rotated 180° and features 7 adjustable locking positions. Adjust the stand to direct the light as needed. For hands-free use, utilize the four N42 magnets on the back of the light to attach it securely to any metal surface.
Figuer 6: Ferstelbere beugel
Figure 7: Magnetic Mounting in Use
Ûnderhâld
- Reiniging: Wiskje it ljocht mei in sêft, damp doek. Brûk gjin abrasive skjinmakkers of solvents.
- Opslach: Store the light in a cool, dry place away from direct sunlight when not in use for extended periods. Ensure the protective cover for the charging ports is securely closed.
- Batterij soarch: To prolong battery life, avoid fully discharging the battery frequently. Recharge the light regularly, even if not in active use.
Troubleshooting
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| Ljocht docht net oan. | Low battery or power button issue. | Charge the light fully. Ensure the power button is pressed correctly. |
| Ljochtútfier is dimmen. | Lege batterij of ferkearde modus. | Recharge the light. Cycle through modes to select a brighter setting. |
| Kin gjin ekstern apparaat oplade. | Work light battery is low or cable issue. | Ensure the work light is sufficiently charged. Try a different USB cable. |
As de problemen oanhâlde, nim dan kontakt op mei de klanttsjinst.
Spesifikaasjes
- Model: W130016A
- Ljocht boarne: COB LED
- Helderheid: Up to 2000 Lumens (High Mode)
- Ljochtmodi: High, Medium, Low, Flashing
- Batterij: 2 x 3.7V, 2000mAh Lithium-Ion (4000mAh total)
- Ynput oplaadpoarte: Type-C (5V, 2A)
- Oplaadpoarte foar útfier: USB-A (5V, 1A)
- Wurkoeren: High: 2 hours, Medium: 3 hours, Low: 8 hours
- Materiaal: Acrylonitrilbutadieenstyreen (ABS), metaal
- Spesjale eigenskippen: 180° Rotatable Stand, 4 N42 Magnets, Waterproof, Shockproof
- Fabrikant: HANGZHOU GREATSTAR INDUSTRIAL CO. LTD
- UPC: 820909691396
Offisjele produktfideo
Video: Perfect Work Lights for Every Job (Duration: 1:44). This video demonstrates the features and versatility of the WORKPRO LED Work Light in various scenarios.
Garânsje en stipe
For warranty information or technical support, please refer to the product packaging or contact WORKPRO customer service directly. Keep your purchase receipt as proof of purchase.