XCQQ S8L-Elongated Bidet Toilet Seat User Manual

1. Ynlieding

Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.

2. Wichtige feiligens ynformaasje

Lês alle feilichheidswarskôgings en ynstruksjes goed troch om it risiko op brân, elektryske skok of ferwûning te ferminderjen.

• Elektryske easken: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
• Wetter Supply: Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
• Gewicht limyt: The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
• Lid Caution: The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
• Reiniging: Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
• Children and Individuals with Reduced Capabilities: Dit apparaat kin brûkt wurde troch bern fan 8 jier en âlder en persoanen mei fermindere fysike, sintúchlike of mentale kapasiteiten of gebrek oan ûnderfining en kennis as se tafersjoch of ynstruksje krigen hawwe oer it gebrûk fan it apparaat op in feilige manier en de belutsen gefaren begripe . Bern meie net boartsje mei it apparaat. Reiniging en brûker ûnderhâld meie net wurde makke troch bern sûnder tafersjoch.

3. Package Ynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:

• XCQQ Bidet Toilet Seat
• 3-way Valve + DMT Pipe (Pre-Installed)
• Befestigingsplaat
• Mounting Hardware (screws, rubber expansion nuts)
• Ynstruksjehânlieding (dit dokumint)

4. Produktfunksjes

The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:

• Waskje mei waarm wetter: Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
• Ferwaarme stoel: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
• Warm lucht droeger: Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
• Soft-Close lid: Foarkomt slamming en ferminderet lûd.
• Nachtljocht: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
• Selsreinigjende nozzle: A stainless steel nozzle that performs self-cleaning before and after each use.
• LED-skerm: Real-time display of water temperature, seat temperature, and drying temperature.
• Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outagen).
• Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.

Image 4.1: Illustration of the heated toilet seat and warm air drying functions.

Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.

Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.

5. Ynstallaasjegids

Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.

Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.

Pre-ynstallaasje kontrôle:

• Turn off the water supply to your toilet.
• Spoel it toilet troch om de tank leech te meitsjen.
• Ferwiderje jo besteande wc-bril en deksel.

Stap foar stap ynstallaasje:

1. Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
   

   Image 5.2: Removing the fixing plate from the bidet seat.
2. Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
   

   Image 5.3: Securing the fixing plate to the toilet bowl.

3. Attach Bidet Unit: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
   

   Image 5.4: Attaching the bidet unit to the fixing plate.

4. Ferbine wetterfoarsjenning: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
   

   Image 5.5: Connecting the bidet to the toilet's water supply.
5. Weromsette wetter en enerzjy: Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.

Initial Power-On and Water Spray Check:

When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.

If the LED light blinks continuously for more than 5 minutes:

1. Unplug the bidet.
2. Slaen de wetterklep út.
3. Wachtsje 3-5 minuten.
4. Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.

Image 5.6: Important attention notice for initial power-on and LED light behavior.

6. Operaasje

The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:

Ofbylding 6.1: Detaillearre view of the side control panel, indicating various function buttons.

Funksjes fan kontrôlepaniel:

• Krêft: Skeakelt de ienheid yn/út.
• Ophâlde: Stops any active washing or drying function.
• Spray: Initiates a general wash.
• Bidet: Initiates a feminine wash.
• Turbo Wash: Provides a stronger, more focused wash.
• Droech: Aktivearret de waarme luchtdroeger.
• Auto: Starts an automatic washing and drying cycle with a single touch.
• Ljocht: Toggles the LED night light on/off.
• Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
• Nozzle Position (FR/BK): Adjusts the nozzle's forward or backward position.
• Wettertemperatuer: Adjusts the water temperature.
• Seat Temp: Past de temperatuer fan 'e ferwaarme sit oan.
• Oantinken: Saves current settings for personalized use.

Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.

7. Underhâld

Regelmjittige reiniging:

• Reiniging fan de nozzle: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
• Ienheid skjinmeitsjen: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
• Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
• Eksterieur: Wipe down the exterior surfaces, including the control panel, with a soft, damp doek.

Lange termyn opslach:

If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.

8. Probleemoplossing

Dit diel behannelet faak foarkommende problemen dy't jo tsjinkomme kinne. As it probleem oanhâldt, nim dan kontakt op mei klanttsjinst.

9. Spesifikaasjes

10. Garânsje en stipe

Garânsje ynformaasje: Please refer to the product packaging or the official XCQQ webside foar detaillearre garânsjebetingsten en -kondysjes. Bewarje jo oankeapbewiis foar garânsjeclaims.

Klantstipe: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand website.