Dragonhawk Wireless Tattoo Gun Machine YZBTD Instruction Manual

1. Ynlieding

This manual provides detailed instructions for the safe and effective operation of your Dragonhawk Wireless Tattoo Gun Machine, Model YZBTD. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. This machine is designed for professional tattoo artists and beginners, offering versatility and reliable performance.

2. Safety Information

Always prioritize safety when operating tattoo equipment. Failure to follow these guidelines may result in injury or damage to the device.

• Allinich foar ekstern gebrûk: This device is intended for tattooing on skin.
• Sterilisaasje: Ensure all needles, cartridges, and contact surfaces are properly sterilized before each use.
• Power Boarne: Use only the provided charging cable and compatible power adapters.
• Batterijfeiligens: Do not expose batteries to extreme temperatures or puncture them. Dispose of used batteries responsibly.
• Behanneling: Handle the machine with care. Avoid dropping or subjecting it to strong impacts.
• Focht: Keep the device dry. It is water-resistant, but not waterproof. Avoid submerging it in liquids.
• Bern: Hâld bûten it berik fan bern.

3. Produkt Overview & komponinten

The Dragonhawk Wireless Tattoo Gun Machine YZBTD is a cordless pen-style rotary tattoo machine featuring an adjustable stroke length and a powerful coreless motor.

Ofbylding 3.1: Oerview of the tattoo machine's control panel and battery.

Key komponinten:

• Masine Body: Main housing containing the motor and drive system.
• Batterijpakket: Detachable power source with OLED display and control buttons.
• Ferstelbere grip: Rotates to adjust needle depth.
• Stroke Adjustment Knob: Allows selection of 7 stroke lengths (2.4mm - 4.2mm).
• Needle Cartridge Slot: Where tattoo needle cartridges are inserted.
• Type-C oplaadpoarte: Foar it opladen fan 'e batterij.

4. Opsette

4.1 Batterij Ynstallaasje

The machine comes with two replaceable batteries to ensure continuous operation.

1. Soargje derfoar dat de masine is útskeakele.
2. Gently twist the battery pack counter-clockwise to detach it from the machine body.
3. Align a charged battery pack with the machine body and twist clockwise until securely fastened.

Figure 4.1: The machine is equipped with two replaceable batteries for extended use.

4.2 Needle Cartridge Installation

Use only compatible Dragonhawk cartridge needles for optimal performance.

1. Select the desired needle cartridge.
2. Insert the needle cartridge into the machine's slot, pushing firmly until it clicks into place.
3. To remove, twist the cartridge slightly and pull it out.

Figure 4.2: Proper insertion of a needle cartridge into the machine.

5. Bedriuwsinstruksjes

Meitsje josels bekend mei it kontrôlepaniel foar effisjinte wurking.

Figure 5.1: Control panel and stroke adjustment.

5.1 Power On / Off

• Druk en hâld de 'O' (Switch Button) for a few seconds to power the machine on or off.
• The OLED display will show the current voltage en batterij nivo.

5.2 Folume oanpassetage

• Brûk de '+' (Voltage Increase Key) en '-' (Voltage Reduction Key) buttons to adjust the voltage yn stappen fan 0.1V.
• De oanrikkemandearre voltage berik is 4V-12V.

5.3 Changing Mode (Liner/Shader)

• Druk op de 'M' (Switch Mode) button to switch between Liner (L) and Shader (S) gears.
• The machine automatically memorizes the voltage settings for each mode.

5.4 Adjusting Stroke Length

The machine offers 7 adjustable stroke lengths from 2.4mm to 4.2mm.

• Rotate the adjustment knob located on the machine body to select the desired stroke length.
• Available lengths: 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, 4.2mm.

Figure 5.2: Adjusting the stroke length by rotating the knob.

5.5 Offisjele produktfideo

6. Underhâld

6.1 Cleaning

• Skeakelje altyd de stroom út foar it skjinmeitsjen.
• Wipe the machine body with a soft, damp cloth and a mild disinfectant.
• Do not use abrasive cleaners or submerge the machine in liquid.
• Ensure no liquid enters the motor or charging port.

6.2 Opladen

The machine is equipped with a Type-C charging port.

• Connect the provided Type-C cable to the charging port on the battery pack.
• Ferbine it oare ein mei in kompatibel USB-stroomadapter.
• In folsleine lading duorret sawat 1.5 oeren.
• The battery indicator on the OLED display will show charging status.

Figure 6.1: Type-C charging port on the battery pack.

6.3 Batterij Soarch

• Om de libbensdoer fan 'e batterij te ferlingjen, foarkom it faak folslein ûntladen fan 'e batterij.
• Store the machine and spare batteries in a cool, dry place when not in use.
• If storing for an extended period, charge the batteries to about 50-60% capacity.

7. Probleemoplossing

Sjoch de tabel hjirûnder foar faak foarkommende problemen en har oplossingen.

8. Spesifikaasjes

Technical details of the Dragonhawk Wireless Tattoo Gun Machine YZBTD.

9. Garânsje & Support

Dragonhawk is committed to providing high-quality products and excellent customer service.

• Produkt dekking: Dragonhawk products typically include coverage for manufacturing defects. Please refer to your purchase documentation for specific warranty terms.
• Technyske stipe: For video tutorials, setup guides, and professional tips, visit Youtube.com/@Dragonhawkofficial.
• Klanttsjinst: For any inquiries or issues with your order, please reach out through Amazon's messaging system.
• Returns: This product has a 30-day return policy for refund/replacement.