Ynlieding
This manual provides essential instructions for the safe installation, operation, and maintenance of your EGLO Salvilanas Integrated LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.
The EGLO Salvilanas light features an integrated LED, a black finish, and a white diffuser, designed for indoor use in various rooms such as kitchens, dining rooms, bedrooms, and hallways. It can be mounted on ceilings or walls.
Safety Information
- WARSKÔGING: Risiko op elektryske skok. Skeakelje de stroom út by de stroomûnderbrekker of de zekeringkast foardat jo ynstallearje of ûnderhâld dogge.
- Alle bedrading moat neffens lokale en nasjonale elektryske foarskriften wêze. As jo net bekend binne mei juste elektryske bedrading, rieplachtsje dan in kwalifisearre elektricien.
- Do not install this fixture in wet locations. It is designed for indoor use only and is not water resistant.
- Soargje derfoar dat it montage-oerflak it gewicht fan it armatuur kin drage.
- Do not attempt to modify the integrated LED components.
- Hâld ferpakkingsmateriaal fuort fan bern.
Pakketynhâld
Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:
- EGLO Salvilanas Integrated LED Ceiling Light fixture (1)
- White plastic diffuser (1)
- Mounting hardware kit (screws, wire nuts, etc.) (1 set)
- Ynstruksje (1)
Opset en ynstallaasje
This fixture is designed for semi-flush mount installation on ceilings or walls.
1. Tarieding
- Skeakelje de stroom út by de haadstroomûnderbrekker of zekeringkast.
- Carefully unpack the fixture and its components. Keep all parts organized.
- Identify the mounting location. Ensure it is a dry, indoor area and the electrical box is securely mounted.
2. Mounting de fixture
Refer to the diagram below for general mounting steps. Specific hardware may vary.
Image: The EGLO Salvilanas Integrated LED Ceiling Light, demonstrating its sleek design suitable for ceiling or wall mounting.
- Attach the mounting bracket (if separate) to the electrical junction box using the provided screws.
- Ferbine de elektryske triedden:
- Ferbine de swarte tried fan it armatuer mei de swarte (live) tried fan 'e oanslutingsdoaze.
- Ferbine de wite tried fan 'e fixture mei de wite (neutrale) tried fan 'e junction box.
- Connect the ground wire from the fixture to the ground wire from the junction box.
- Befestigje alle ferbiningen mei draadmoeren en elektryske tape.
- Plak alle draden foarsichtich yn 'e junction box.
- Align the fixture with the mounting bracket and secure it using the provided screws or twist-lock mechanism.
- Install the white plastic diffuser onto the fixture according to its design (e.g., twist-lock, clips).
3. Finale Stappen
- Weromsette macht by de circuit breaker.
- Test de ljochtarmatuur.
Operating Instructions
The EGLO Salvilanas LED Ceiling Light is designed for easy operation.
- Power On/Off: The light can be controlled via a wall switch connected to the fixture's power supply.
- Kontrôlemetoaden: This fixture supports control via a remote control and a compatible app. Refer to the separate instructions provided with your remote control or app for pairing and advanced features.
- Ljochtkleur: The integrated LED provides a warm white light.
Ûnderhâld
To ensure the longevity and appearance of your EGLO Salvilanas LED Ceiling Light, follow these simple maintenance guidelines:
- Reiniging: Skeakelje de stroom út foardat jo skjinmeitsje. Brûk in sêfte, droege of licht droegeamp cloth to wipe the exterior surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
- LED-komponinten: The integrated LED light source is designed for long-term use and is not user-replaceable. Do not attempt to open or service the LED module.
- Diffuser Soarch: Handle the white plastic diffuser with care to avoid scratches or damage.
Troubleshooting
If you experience issues with your light fixture, try the following solutions:
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| Ljocht docht net oan. | Gjin macht foar it fixture. Losse wiring ferbining. Defekte muorreskeakel. |
Kontrolearje circuit breaker. Kontrolearje oft alle triedferbiningen feilich binne (mei de stroom út). Test wall switch or replace if necessary. |
| Ljocht flikkerjen. | Losse wiring. Ynkompatibele dimmer (as fan tapassing). |
Kontrolearje de bedradingferbiningen (mei de stroom út). Ensure any dimmer switch is LED-compatible. |
| Remote control/App not working. | Batterijen dea. Net goed keppele. Sinjaal ynterferinsje. |
Ferfange batterijen op ôfstân. Refer to remote/app instructions for pairing. Ensure no obstructions or strong interference sources. |
If these steps do not resolve the issue, contact customer support.
Spesifikaasjes
| Merk: | Eglo |
| Model Oantal: | 206019A |
| Ljocht boarne: | Yntegreare LED |
| Wattage: | 21 watt |
| Helderheid: | 2850 lumen |
| Effisjinsje: | 135.71 lumen/watt |
| Ljochtkleur: | Warm Wit |
| Voltage: | 12 Volt (DC) |
| Materiaal: | Alloy Steel, Metal (fixture), Plastic (shade) |
| Ein: | Black (fixture), White (diffuser) |
| Ofmjittings (L x B x H): | 30.32" x 8" x 1.5" |
| Item Gewicht: | 5 pûn sterling |
| Ynstallaasje type: | Semi-ynboude montage |
| Kontrôlemetoade: | App, Ofstânsbetsjinning |
| Binnen / bûtengebrûk: | Binnen |
| Water Resistance Level: | Net wetterbestindich |
Garânsje
Dit EGLO-produkt falt ûnder in 1 jier fabryksgarânsje fan 'e datum fan oankeap. Dizze garânsje dekt defekten yn materialen en fakmanskip by normaal gebrûk. It dekt gjin skea dy't ûntstiet troch ferkearde ynstallaasje, ûngelok, misbrûk, misbrûk of net-autorisearre oanpassingen. Bewarje jo bewiis fan oankeap foar garânsjeclaims.
Stypje
For further assistance, technical support, or warranty inquiries, please refer to the contact information provided with your product packaging or visit the official EGLO website. When contacting support, please have your model number (206019A) and proof of purchase readily available.