Total TCS1075248

Total TCS1075248 600W 8Bar Direct Drive 24-Liter Air Compressor User Manual

Model: TCS1075248 | Brand: Total

1. Ynlieding

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Total TCS1075248 600W 8Bar Direct Drive 24-Liter Air Compressor. Please read this manual thoroughly before operating the unit and keep it for future reference.

The Total TCS1075248 is a heavy-duty, direct-drive air compressor designed for industrial and workshop applications. It features a powerful 600W motor and an oil-free system, providing efficient and consistent compressed air for various pneumatic tools and equipment. Its 24-liter tank ensures a stable air supply and reduces motor cycling frequency.

2. Safety Ynstruksjes

Folgje altyd basisfeiligensmaatregels om it risiko op brân, elektryske skok en persoanlik letsel te ferminderjen by it brûken fan dit produkt.

  • Lês it hânboek: Understand all operating instructions and warnings before use.
  • Oog- en earbeskerming: Always wear safety glasses and hearing protection when operating the compressor.
  • Goede fentilaasje: Brûk de kompressor yn in goed fentilearre romte. Blokkearje de loftopeningen net.
  • Elektryske feiligens: Ensure the power supply matches the compressor's requirements (220-240V, 50Hz). Use a grounded outlet and avoid using extension cords unless absolutely necessary and rated for the compressor's power.
  • Drukferliening: Never exceed the maximum operating pressure of 8 Bar. Ensure the pressure relief valve is functional.
  • Ûnderhâld: Disconnect the power supply and release all air pressure from the tank before performing any maintenance or repairs.
  • Bern en omstanders: Keep children and unauthorized persons away from the operating compressor.
  • Stabiliteit: Ensure the compressor is on a stable, level surface to prevent tipping.

3. Package Ynhâld

Kontrolearje oft alle items oanwêzich binne by it útpakken:

  • 1 x Total TCS1075248 600W 8Bar Direct Drive 24-Liter Air Compressor
  • User Manual (dit dokumint)

4. Produktfunksjes

  • Krêftige motor: 600W (0.8 HP) copper wire motor for reliable performance.
  • Direct Drive System: Ensures efficient and consistent air compression.
  • Oaljefrije operaasje: Reduces maintenance and eliminates oil contamination in compressed air.
  • Grutte tankkapasiteit: 24-liter (6.3 Gallons) air tank for extended use and reduced cycling.
  • Low Noise Level: Wurket op sawat 60 dB, geskikt foar ferskate omjouwings.
  • Maksimum druk: Delivers up to 8 Bar (116 PSI) of operating pressure.
  • Portabiliteit: Útrist mei tsjillen foar maklike beweging.
  • Mearsidige applikaasjes: Ideal for car repair, carpentry, and general industrial tasks.

5. Opsette

Follow these steps to set up your air compressor:

  1. Utpakke: Helje de kompressor foarsichtich út 'e ferpakking. Ynspektearje op ferstjoerskea.
  2. Attach Wheels and Feet: If not pre-assembled, attach the wheels and rubber feet to the compressor base using the provided hardware. Ensure they are securely fastened.
  3. Pleatsing: Position the compressor on a firm, level surface in a well-ventilated area. Ensure there is adequate space around the unit for air circulation.
  4. Elektryske ferbining: Connect the power cord to a grounded 220-240V, 50Hz electrical outlet. Ensure the power switch on the compressor is in the 'OFF' position before plugging it in.
  5. Initial Run (Break-in): For the first use, turn the pressure regulator to its lowest setting or open the drain valve slightly. Turn the compressor ON and allow it to run for 10-15 minutes without any air tools connected. This helps to properly seat the motor components.
Total TCS1075248 24-Liter Air Compressor

Image: Total TCS1075248 24-liter air compressor. It features a blue tank with two direct-drive motor units on top, a pressure gauge, and wheels for portability.

6. Bedriuwsinstruksjes

To operate your air compressor:

  1. Power On: Ensure the compressor is plugged in and the power switch is in the 'ON' position. The motor will start and build pressure in the tank.
  2. Monitor druk: Observe the pressure gauge. The compressor will automatically shut off once the maximum pressure (8 Bar) is reached. It will restart when the pressure drops below a preset minimum.
  3. Útfierdruk oanpasse: Use the pressure regulator knob to set the desired output pressure for your air tool. The regulated pressure will be shown on the secondary gauge.
  4. Ferbine loftark: Attach your pneumatic tool to the quick-connect coupler on the air hose.
  5. Operaasje: Use your air tool as required. The compressor will cycle on and off to maintain tank pressure.
  6. Útskeakelje: When finished, turn the power switch to 'OFF'.
  7. Druk ferminderje: Disconnect the air tool and release any remaining air pressure from the tank by opening the drain valve or using an air blow gun until the gauge reads zero.

7. Underhâld

Regular maintenance ensures optimal performance and extends the life of your compressor. Always disconnect power before maintenance.

  • Kondensaasje yn ôfwettering (deistich/nei elk gebrûk): Open the drain valve located at the bottom of the air tank to release accumulated moisture. This prevents rust and corrosion inside the tank. Close the valve tightly after draining.
  • Clean Air Filter (Monthly or as Needed): Inspect the air filter for dust and debris. Clean it by tapping out loose dirt or using compressed air. Replace if heavily soiled or damaged. A clogged filter reduces efficiency.
  • Inspect Hoses and Connections (Regularly): Check all air hoses, fittings, and connections for leaks, cracks, or damage. Replace any worn or damaged parts immediately.
  • Algemiene reiniging: Keep the compressor clean and free of dust and debris. Wipe down the exterior with a damp doek. Brûk gjin hurde gemikaliën.
  • Check Safety Valve: Periodically pull the ring on the safety relief valve to ensure it operates freely and is not obstructed.

8. Probleemoplossing

Sjoch dit diel foar faak foarkommende problemen en har oplossingen:

ProbleemMooglike oarsaakOplossing
Compressor start netNo power; tripped circuit breaker; faulty switchCheck power connection; reset breaker; contact service.
Compressor runs continuously or cycles too frequentlyAir leak in tank or connections; faulty pressure switchCheck for leaks (use soapy water); tighten connections; contact service.
Leech luchtdrukútfierClogged air filter; air leak; pressure regulator set too lowClean/replace air filter; check for leaks; adjust pressure regulator.
Oermjittige lûd of trillingLoose components; worn motor bearings; unstable surfaceCheck and tighten fasteners; place on stable surface; contact service for internal issues.
Moisture in air outputTank not drained regularly; high humidityDrain tank daily; use an in-line air dryer if needed.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.

9. Spesifikaasjes

Model NumberTCS1075248
MerkTotaal
Ynput Power600W (0.8 HP)
Voltage220-240V ~ 50Hz
Tank Kapasiteit24 liter (6.3 gallons)
Maks bestjoeringsdruk8 bar (116 PSI)
No-load snelheid1440 rpm
Noise Level60 dB
Motor TypeDirect Drive, Copper Wire
Lubrication SystemOaljefrij
Produkt Ofmjittings (L x B x H)57 x 28 x 58 sm
KleurBlau
Oanrikkemandearre UsesCar repair, carpentry, industrial use

10. Garânsje en stipe

This Total TCS1075248 Air Compressor is designed for durability and performance. For specific warranty details, please refer to the warranty card included with your purchase or contact Total customer service.

For technical support, spare parts, or service inquiries, please contact your local Total dealer or authorized service center. Always provide the model number (TCS1075248) when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.