TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun

1. Ynlieding

Thank you for choosing the TOTAL TBLI2002 20V Cordless Lithium-Ion Heat Gun. This portable tool is designed for various applications requiring precise heat, such as welding, heat shrink tubing, and loosening rusted bolts. Its cordless design offers excellent mobility and convenience. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image 1.1: The TOTAL TBLI2002 Cordless Heat Gun. This image shows the main unit of the heat gun, highlighting its ergonomic design and the nozzle at the front.

2. Safety Ynstruksjes

Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this tool.

• Lês alle ynstruksjes: Meitsje josels bekend mei de wurking en feilichheidsrjochtlinen fan it ark.
• Persoanlike feiligens: Draach passende persoanlike beskermingsmiddelen, ynklusyf feilichheidsbrillen en waarmtebestindige wanten.
• Wurkgebiet: Ensure your work area is well-ventilated and free from flammable materials. Do not use in explosive atmospheres.
• Foarkom kontakt: The nozzle and accessories become extremely hot during and after use. Avoid direct contact with skin.
• Goede opslach: Allow the tool to cool completely before storing. Store in a dry, secure place out of reach of children.
• Batterijfeiligens: Use only specified 20V Lithium-Ion batteries and chargers (sold separately). Do not expose batteries to heat or water.
• Oververhittingsbeskerming: The tool is equipped with overheat protection. If it shuts off, allow it to cool before resuming use.

3. Produkt Overview

Understand the main components of your TOTAL TBLI2002 heat gun.

1. Heat Nozzle: Directs the hot air.
2. Air Vents: For cooling and air intake.
3. Power Switch: Controls ON/OFF and temperature/airflow settings.
4. Behanneling: Ergonomyske grip foar noflik gebrûk.
5. Batterij poarte: Where the 20V Lithium-Ion battery (sold separately) is inserted.

Ofbylding 3.1: Eksplodearre view of the heat gun showing included nozzles and a diagram of the battery compartment. This image illustrates the main components and how accessories attach.

Image 3.2: Close-up of the product label, detailing voltage, temperature, and airflow specifications.

4. Opsette

4.1 Batterij Ynstallaasje

The TOTAL TBLI2002 requires a 20V Lithium-Ion battery, which is sold separately. Ensure the battery is fully charged before use.

• Align the battery with the battery port at the base of the heat gun handle.
• Skuif de batterij yn 'e poarte oant er feilich op syn plak klikt.
• Om te ferwiderjen, druk op de batterij-ûntgrendelingsknop (as oanwêzich) en skow de batterij derút.

Ofbylding 4.1: Side view of the heat gun with a 20V battery attached, demonstrating proper battery installation.

4.2 Nozzle-oanhechting

The heat gun comes with various nozzles for different applications:

• Reduction Nozzle: For concentrating heat on small areas.
• Reflektormondstuk: For heat shrink tubing or bending plastic pipes.
• Flat Nozzle: For spreading heat over a wider area, such as paint stripping.

To attach a nozzle:

• Ensure the heat gun is off and cool.
• Slide the desired nozzle onto the heat nozzle until it is firmly seated.
• To remove, pull the nozzle off once the tool has cooled.

Image 4.2: The heat gun shown with a flat nozzle attached, ready for use.

5. Bedriuwsinstruksjes

5.1 Powering On/Off and Temperature/Airflow Settings

The power switch typically has multiple positions to control both power and heat/airflow settings.

• ÚT (0): The tool is off.
• Ynstelling 1: Provides lower temperature (300°C) and lower airflow (100 L/min).
• Ynstelling 2: Provides higher temperature (550°C) and higher airflow (200 L/min).

Operearje:

1. Ensure the battery is installed and a suitable nozzle is attached.
2. Slide the power switch to the desired setting (1 or 2). The tool will begin to heat up.
3. Direct the hot air towards the workpiece, maintaining a safe distance to avoid scorching or damage.
4. After use, slide the power switch to the OFF (0) position.
5. Allow the tool to cool down completely before handling the nozzle or storing.

Ofbylding 5.1: Boppe view of the heat gun, showing the power switch with its distinct settings.

5.2 Algemiene gebrûkstips

• Always test on a scrap piece of material first to determine the optimal temperature and distance.
• Keep the heat gun moving to prevent overheating a single spot.
• For delicate materials, use the lower temperature setting and maintain a greater distance.

6. Underhâld

Regelmjittich ûnderhâld soarget foar de lange libbensdoer en feilige wurking fan jo waarmtegewear.

• Reiniging: After each use, ensure the tool is cool. Wipe the exterior with a soft, damp doek. Brûk gjin hurde gemikaliën of abrasive skjinmakkers.
• Dúdlike loftventilen: Regularly check and clear the air intake and exhaust vents of any dust or debris to prevent overheating. Use a soft brush or compressed air if necessary.
• Nozzle Soarch: Clean nozzles after use, ensuring they are free of residue.
• Opslach: Store the heat gun and its accessories in a dry, clean, and secure location, away from direct sunlight and extreme temperatures. Ensure the battery is removed for long-term storage.

Ofbylding 6.1: Front view of the heat gun, highlighting the air vents that require regular cleaning.

7. Probleemoplossing

If you encounter issues with your heat gun, refer to the following common problems and solutions:

As it probleem oanhâldt nei it besykjen fan dizze oplossingen, nim dan kontakt op mei klanttsjinst.

8. Spesifikaasjes

9. Garânsje en stipe

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official Total Tools webside. Bewarje jo bewiis fan oankeap foar alle garânsjeclaims.

For further assistance, please contact Total customer service.