Lectrosonics DPR-A Digital Plug On Transmitter brûkershânlieding

1. Ynlieding

The Lectrosonics DPR-A is a state-of-the-art digital plug-on transmitter designed for professional audio applications. It offers a unique design that seamlessly integrates with any microphone or line-level source via a standard XLR connector. This manual provides detailed instructions for the proper setup, operation, and maintenance of your DPR-A transmitter.

Key features include a wide tuning range across the UHF television band, selectable output power, and robust AES 256-CTR encryption for secure transmissions. Its external antenna ensures exceptional operating range and reliability.

2. Wichtige feiligens ynformaasje

Please read and follow all safety instructions carefully to prevent damage to the device or injury to yourself.

• Stel it apparaat net bleat oan wetter of tefolle focht.
• Avoid extreme temperatures. Operate the device within its specified temperature range.
• Besykje it apparaat net sels te iepenjen of te ûnderhâlden. Lit alle ûnderhâldswurk oer oan kwalifisearre personiel.
• Use only specified batteries and dispose of them properly.
• Soargje foar goede fentilaasje by it brûken fan it apparaat.
• Hâld bûten it berik fan bern.

3. Produktkomponinten en kontrôles

Familiarize yourself with the various parts and controls of your DPR-A transmitter.

Ofbylding 3.1: Lectrosonics DPR-A Digital Plug On Transmitter showing the XLR connector, control panel with LCD, and antenna connector.

3.1. Front Panel Controls en Display

• LCD Display: Shows frequency, battery status, audio levels, menu options, and other operational information.
• MENU/SEL Button: Used to enter menus and select options.
• BACK knop: Used to return to the previous menu or exit a setting without saving.
• Power knop (⑂): Druk en hâld yndrukt om it apparaat oan of út te skeakeljen.
• op (↑) en Down (↓) Knoppen: Used to navigate menu options and adjust values.
• PWR KEY LED: Indicates power status and key lock.
• Audio Level Indicators (-10, -20): LEDs indicating input audio signal levels.

3.2. Connectors

• XLR Connector (Male): Standard 3-pin XLR for connecting microphones or line-level audio sources.
• Antenna Connector (SMA): For attaching the external antenna.

4. Setup Guide

Follow these steps to prepare your DPR-A transmitter for operation.

4.1. Batterij Ynstallaasje

1. Locate the battery compartment (typically on the side or bottom of the unit).
2. Iepenje de batterij compartment cover.
3. Insert fresh batteries, observing the correct polarity (+/-) as indicated inside the compartment.
4. Slút it deksel fan it batterijfak feilich.

4.2. Microphone/Line Source Connection

1. Align the XLR connector of your microphone or audio source with the XLR input on the DPR-A transmitter.
2. Push firmly until it clicks into place, ensuring a secure connection.

4.3. Antenne Connection

1. Screw the supplied antenna onto the SMA antenna connector on the side of the transmitter.
2. Tighten the antenna finger-tight; do not overtighten.

5. Operaasje

This section details how to operate your DPR-A transmitter.

5.1. Oan- / útskeakelje

• Om oan te setten: Druk en hâld de Power knop (⑂) for approximately 2 seconds until the display illuminates.
• Om út te skeakeljen: Druk en hâld de Power knop (⑂) for approximately 2 seconds. The display will show a power-down confirmation; release the button to confirm.

5.2. Navigearje it Menu

• Parse MENU/SEL om it haadmenu yn te gean.
• Brûk de Up (↑) en Omleech (↓) buttons to scroll through menu options.
• Parse MENU/SEL again to select a highlighted option or enter a sub-menu.
• Gebrûk Up (↑) en Omleech (↓) to change values or settings.
• Parse MENU/SEL to confirm a setting, or RÊCH om út te gean sûnder te bewarjen.
• Parse RÊCH repeatedly to return to the main operating screen.

5.3. Frekwinsje Seleksje

The DPR-A can tune from 470.100 to 607.950 MHz.

1. From the main menu, navigate to the "Frequency" or "Tune" option.
2. Brûk de Up (↑) en Omleech (↓) buttons to adjust the frequency in 100 kHz or 25 kHz steps.
3. Parse MENU/SEL to confirm the selected frequency.

5.4. Output Power Oanpassing

The transmitter offers selectable output power of 25 mW or 50 mW.

1. Navigate to the "Power" or "RF Power" setting in the menu.
2. Select either 25 mW or 50 mW using the Up (↑) en Omleech (↓) knoppen.
3. Parse MENU/SEL om de ynstelling te bewarjen.

5.5. Encryption (AES 256-CTR)

The DPR-A supports AES 256-CTR encryption for secure communication. Refer to the detailed encryption setup instructions in the full Lectrosonics manual for key generation and synchronization procedures.

6. Underhâld

Proper care and maintenance will extend the life of your DPR-A transmitter.

6.1. Cleaning

• Feie de bûtenkant fan it apparaat ôf mei in sêfte, droege doek.
• Foar koppige smoargens, brûk in bytsje damp doek mei mylde sjippe, en feie it dan fuortendaliks droech.
• Brûk gjin abrasive reinigingsmiddels, oplosmiddels of hurde gemikaliën.

6.2. Batterij Soarch

• Ferwiderje batterijen as it apparaat foar in langere perioade net brûkt wurdt om lekkage te foarkommen.
• Always use high-quality batteries.

6.3. Opslach

• Bewarje de stjoerder op in koel, droech plak, fuort fan direkt sinneljocht en ekstreme temperatueren.
• Protect the unit from physical shock and vibration.

7. Probleemoplossing

This section addresses common issues you might encounter with your DPR-A transmitter.

If the problem persists after trying these solutions, please contact Lectrosonics customer support.

8. Spesifikaasjes

Technical specifications for the Lectrosonics DPR-A Digital Plug On Transmitter.

• Model: DPR-A
• Frekwinsjeberik: 470.100 - 607.950 MHz (UHF TV Band)
• Tuning stappen: 100 kHz of 25 kHz
• Output Power: Selectable 25 mW or 50 mW
• Fersifering: AES 256-CTR
• Audio-ynfier: Standard XLR connector (microphone/line level)
• Antenne Connector: SMA type
• Item Gewicht: 2 pyk
• ASIN: B0CPTLS5RX
• Datum earst beskikber: 6 augustus 2024

9. Warranty Information

Lectrosonics products are covered by a limited warranty. For detailed information regarding warranty terms, conditions, and registration, please refer to the warranty card included with your purchase or visit the official Lectrosonics webside. Bewarje jo bewiis fan oankeap foar garânsjeclaims.

10. Klant Support

For technical assistance, service, or additional information, please contact Lectrosonics customer support:

• Website: www.lectrosonics.com/support
• Tillefoan: Ferwize nei de webside foar regionale kontaktnûmers.
• E-post: Ferwize nei de webside foar stipe-e-mailadressen.

When contacting support, please have your product model (DPR-A) and serial number ready.