Maxxima Horizontal LED Step Light Instruction Manual

1. Produkt Overview

The Maxxima Horizontal LED Step Light (Model MEW-SW203B-02) is designed to provide efficient and adjustable illumination for indoor and outdoor stairways, pathways, and decks. This fixture features a 3 CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight) to suit various lighting preferences and environments. Its durable aluminum construction and IP65 rating ensure suitability for wet, damp, of droege lokaasjes.

figuer 1: Front view of the Maxxima Horizontal LED Step Light in black finish.

2. Safety Information

• WARSKÔGING: Risiko op elektryske skok. Skeakelje de stroom út by de zekering of stroomûnderbrekker foardat jo ynstallearje of ûnderhâld dogge.
• Dit produkt moat wurde ynstalleare yn oerienstimming mei de jildende ynstallaasjekoade troch in persoan dy't bekend is mei de bou en wurking fan it produkt en de belutsen gefaren.
• Soargje derfoar dat alle elektryske ferbiningen feilich binne en foldogge oan lokale koades en ferordeningen.
• Ynstallearje dizze armatuer net mei wiete hannen of wylst jo op wiete of dikke plakken steane.amp oerflakken.
• This fixture is designed for 120VAC operation. Do not connect to any other voltage.
• Wizigje it apparaat net en brûk it net foar oare doelen as it bedoelde gebrûk.

3. Package Ynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje:

• Maxxima Horizontal LED Step Light Unit (2-Pack)
• Montagemateriaal (skroeven, triedmoeren)
• Ynstruksjehânlieding (dit dokumint)

figuer 2: Exploded view showing the step light components, including the faceplate and internal module.

4. Spesifikaasjes

5. Ynstallaasje ynstruksjes

Foardat jo begjinne: Ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.

1. De ferbiningsdoaze tariede: Ensure you have a standard one-gang junction box installed in the desired location.
2. Ferbine wiring:
   • Ferbine de swart tried fan it apparaat nei de hyt (black) wire from the junction box.
   • Ferbine de wyt tried fan it apparaat nei de neutraal (white) wire from the junction box.
   • Ferbine de grien tried fan it apparaat nei de grûn (green or bare copper) wire from the junction box.
   Secure all connections with the provided wire nuts.
3. Selektearje kleurtemperatuer (CCT): Before mounting, locate the CCT selection switch on the back of the light module. Slide the switch to your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Daylight).

   Figure 3: Back of the light module with CCT selection switch (3000K/4000K/5000K).
4. Mount the Light Module: Carefully tuck the wires into the junction box. Align the light module with the junction box and secure it using the provided mounting screws.
5. Attach the Faceplate: Once the module is securely mounted, snap or screw the decorative faceplate onto the light module.
6. Kracht werstelle: Turn the power back ON at the circuit breaker or fuse box. Test the light to ensure proper operation.

Figure 4: Maxxima LED Step Light installed on a staircase wall.

Ynstallaasje Video Guide

Video 1: This video demonstrates the components of the Maxxima Horizontal LED Step Light, how to select the color temperature (3000K, 4000K, 5000K) using the switch, and the final appearance of the light installed.

6. Bedriuwsinstruksjes

The Maxxima Horizontal LED Step Light operates by simply turning on the power at the wall switch connected to the fixture. The chosen color temperature (3000K, 4000K, or 5000K) will illuminate once power is supplied. The CCT setting is selected during installation and remains constant until manually changed.

Figure 5: Close-up of the step light emitting warm white light (3000K).

7. Underhâld

The LED step light requires minimal maintenance. To clean the fixture:

• Ensure power is OFF before cleaning.
• Feie it bûtenste oerflak ôf mei in sêfte, damp doek.
• Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Periodically check for any loose connections or damage to the wiring, especially for outdoor installations.

8. Probleemoplossing

If the LED step light is not functioning correctly, refer to the following common issues and solutions:

• Ljocht giet net ON:
  • Check if the power supply is ON at the circuit breaker.
  • Verify that all wire connections are secure and correctly made (hot to hot, neutral to neutral, ground to ground).
  • Ensure the fixture is receiving the correct voltage (120VAC).
• Ljocht flikkert of dimt:
  • Kontrolearje op losse draadferbiningen.
  • Ensure the fixture is not connected to a dimmer switch unless explicitly rated for dimming (this model is not specified as dimmable).
  • Kontrolearje in stabile stroomfoarsjenning.
• Ferkearde kleurtemperatuer:
  • Skeakelje de krêft út nei de fixture.
  • Remove the faceplate and module to access the CCT selection switch.
  • Adjust the switch to the desired setting (3000K, 4000K, or 5000K).
  • Reassemble and restore power.

If issues persist after following these steps, contact Maxxima customer support.

9. Garânsje en stipe

This Maxxima Horizontal LED Step Light is covered by a 3-jierrige garânsje út de datum fan oankeap. Dizze garânsje dekt defekten yn materialen en fakmanskip ûnder normaal gebrûk.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

Kontakt ynformaasje: Refer to the Maxxima webwebside of jo oankeapdokumintaasje foar de meast aktuele kontaktgegevens.