Mytrix M16 Leverless Arcade Controller brûkershantlieding

Ynlieding

Tankewol foar de oankeapasing the Mytrix M16 Leverless Arcade Controller. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device. Please read it thoroughly to ensure optimal performance and longevity of your controller.

Pakketynhâld

Kontrolearje oft alle hjirûnder neamde items yn jo pakket opnommen binne:

• Mytrix M16 Leverless Arcade Controller
• USB-C-kab
• Keycap Puller
• User Manual
• Extra Low Profile Red Switches (x2)
• Extra Keycaps (x2)

Image: Contents of the Mytrix M16 package, including the controller, USB-C cable, keycap puller, manual, two extra switches, and two extra keycaps.

Opset en kompatibiliteit

The Mytrix M16 controller offers wide compatibility across various platforms. Ensure your device is updated to the latest firmware for best performance.

Systeem easken

• PC: Windows 10 and above, Steam Deck, Raspberry Pi, MiSTer, Linux
• Konsoles: PS3, PS4, Nintendo Switch
• Mobile/Other: Android, iPadOS, MacOS
• Noat: For PlayStation 5 and Xbox consoles, an additional adapter is required (not included).

Image: Visual representation of the Mytrix M16 controller's compatibility with various platforms including PS5, PS4, PS3, PC, Switch, Steam, Arcade, and Xbox (with adapter).

Earste ferbining

1. Connect the provided USB-C cable to the controller's USB-C port.
2. Connect the other end of the USB-C cable to your desired gaming platform (PC, console, etc.).
3. The controller should be automatically recognized by most compatible systems.

Operating Instructions

The Mytrix M16 features a GP-2040-CE chip for ultra-low latency and various control modes.

Kontrôle Modes

The controller supports multiple input modes:

• X-ynput modus
• Switch modus
• PS3/D-input mode
• PS4 modus
• Toetseboerd modus

Button Layout and Key Values

Refer to the diagram and table below for the standard button layout and corresponding key values across different modes.

Image: Diagram showing the button layout of the Mytrix M16 controller and a table detailing key values for XInput, Switch, PS4/PS3, DInput, Arcade, and RP2040 modes.

Spesjale funksjes

• Turbofunksje: Activates rapid fire for selected buttons. Consult the web configuration for specific setup.
• SOCD Cleaning Modes: Supports various Simultaneous Opposite Cardinal Direction cleaning modes to prevent conflicting directional inputs. Configurable via web ynterface.
• M1/M2 Custom Buttons: Two customizable buttons for advanced control.

RGB ferljochting

The controller features customizable RGB lighting with 4 preset modes.

Image: The Mytrix M16 controller displaying various RGB backlight colors, illustrating the 4 preset modes.

Custom RGB Lighting Controls

Adjust RGB lighting using the following button combinations:

• SELECT + START + X: Next Animation
• SELECT + START + Y: Previous Animation
• SELECT + START + A: Helderheid omheech
• SELECT + START + B: Helderheid omleech
• SELECT + START + RB: LED Parameter Up
• SELECT + START + RT: LED Parameter Down
• SELECT + START + LB: Pressed Parameter Up
• SELECT + START + LT: Pressed Parameter Down

Image: A visual guide to customizing RGB lighting on the Mytrix M16 controller, showing various color options and control combinations.

Maintenance and Customization

The Mytrix M16 is designed for easy maintenance and extensive customization.

Hot-Swappable Switches

The controller uses Gateron Low Profile Red Switches, which are hot-swappable. This allows you to replace switches without soldering.

• Switch Type: Gateron Low Profile Reade skeakels
• Lifespan: 50 miljoen
• Bedriuwskrêft: Likernôch 45 g
• Reisôfstân: 3.2 mm
• Aksjepunt: 1.5 mm

Ofbylding: Close-up view of the Gateron Low Profile Red Switches on the Mytrix M16 controller, highlighting their hot-swappable nature.

Detachable 7-Layer Design

The controller features a 7-layer detachable board design, enabling customization of the keyboard's graphics and internal components.

Ofbylding: Eksplodearre view of the Mytrix M16 controller, showing its 7-layer detachable design for customization, including ABS keycaps, acrylic sheets, switches, and PCB board.

DIY Screen & Artwork Support

Personalize your controller with custom artwork and screen displays.

Ofbylding: Examples of custom artwork and screen displays on the Mytrix M16 controller, demonstrating DIY customization possibilities.

Algemiene Cleaning

To clean your controller, use a soft, dry cloth. Avoid abrasive cleaners or solvents. For deeper cleaning, the detachable layers allow access to internal components.

Troubleshooting

This section addresses common issues you might encounter with your Mytrix M16 controller.

Konnektivität Issues

• Controller not detected: Ensure the USB-C cable is securely connected to both the controller and the device. Try a different USB port or cable.
• No data flow: If the controller powers on but is not recognized by any system (Windows, PopOS, consoles), attempt to access the web konfigurator.

Web Configuration Access

The Mytrix M16 features a built-in embedded web configuration interface for advanced settings and firmware updates.

1. Hâld de START button while plugging the device into your computer.
2. The controller should enter a special mode, often displaying an IP address on its small screen.
3. Iepenje a web browser on your computer and navigate to the displayed IP address.
4. If the browser times out or no device is connected, ensure your computer's network settings allow connection to local devices.

Double Inputs or Unresponsive Buttons

• Double inputs: This can sometimes be caused by outdated firmware. Access the web configurator to check for and install the latest firmware updates.
• Net reagearjende knoppen: The controller supports hot-swappable switches. If a specific button is unresponsive, try replacing its switch with one of the included spares using the keycap puller.

Firmware-fernijings

Firmware updates are crucial for optimal performance and resolving potential issues. The Mytrix M16 uses an open-source GP2040-CE firmware.

• Foardat bywurkje: It is highly recommended to back up your current settings and take screenshots of all web configurator pages. Firmware updates can sometimes reset settings or change interface elements.
• Post-update issues: If LEDs or the screen are deactivated after an update, you may need to re-enable them through the web configurator, as default firmware settings might disable these features.
• Refer to the official GP2040-CE documentation for detailed instructions on firmware updates and configuration.

Spesifikaasjes

Image: Diagram illustrating the physical dimensions of the Mytrix M16 controller: 27 cm (10.63") length, 20 cm (7.87") width, and 1 cm (0.39") thickness.

Garânsje en stipe

Mytrix is committed to providing quality products and customer satisfaction. For technical support, warranty claims, or any inquiries, please contact Mytrix customer service.

• Klanttsjinst: Refer to the Mytrix official webside of jo oankeapplatfoarm foar kontaktgegevens.
• Garânsje: Specific warranty terms may vary by region and retailer. Please retain your proof of purchase for warranty services.