Maxxima MEL-S1013100W LED Outdoor Flood Wall Light Instruction Manual

1. Safety Information

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Skeakelje altyd de stroom út by de stroomûnderbrekker foardat jo ynstallaasje of ûnderhâld útfiere.
• Rieplachtsje in kwalifisearre elektricien as jo net wis binne oer it ynstallaasjeproses.
• Soargje derfoar dat alle elektryske ferbiningen feilich binne en foldogge oan lokale koades en ferordeningen.
• Do not install on a dimmer switch.
• This fixture is rated for outdoor use and is water resistant.

2. Package Ynhâld

Kontrolearje oft alle ûnderdielen oanwêzich binne foardat jo begjinne mei de ynstallaasje.

• LED Outdoor Flood Wall Light (1 unit)
• Mounting Hardware (screws, wire connectors)
• Gasket
• Instruction Manual

Figure 2.1: Product components and adjustable parts.

3. Produktfunksjes

The Maxxima LED Outdoor Flood Wall Light is designed for reliable outdoor security and illumination.

• Krêftige ferljochting: Delivers 950 lumens of 3000K warm white light with an energy-efficient 13W design.
• Avansearre bewegingsdeteksje: PIR motion sensor with up to a 70 ft range.
• Adjustable Timers: Choose from 1, 5, or 10 minutes for how long the light stays on after motion detection.
• Dusk-to-Dawn Sensor: Photocell sensor automatically operates at night and conserves energy during the day.
• Ferstelbere kop: Easily direct the light beam with a 180° vertical tilt.
• Adjustable Arm and Sensor: 90° vertical arm tilt and 180° vertical tilt & horizontal swivel for the motion sensor, with 360° sensor rotation.
• Duorsume konstruksje: Built with aluminum, rated for 50,000 lifetime hours, ETL listed.

4. Ynstallaasje

4.1 Montage fan de fixture

1. Skeakelje de stroom út by de circuit breaker foardat jo ynstallaasje begjinne.
2. Remove the existing fixture (if any) and disconnect wiring.
3. Attach the mounting plate to the junction box using the provided screws. Ensure the gasket is properly seated between the fixture and the mounting surface for a weather-tight seal.
4. Feed the electrical wires from the junction box through the center hole of the mounting plate.

4.2 Wiring Ferbinings

Ferbine de triedden as folget:

• Ferbine de Swart tried fan it apparaat nei de Swart (Live/Hot) wire from the junction box.
• Ferbine de Wyt tried fan it apparaat nei de Wyt (Neutrale) tried fan 'e oanslutingsdoaze.
• Ferbine de Grien (Ground) wire from the fixture to the Grien or bare copper (Ground) wire from the junction box.
• Befestigje alle ferbiningen mei de levere triedferbiningen.

Figure 4.1: Wiring connections for the flood light.

4.3 Finale Gearkomste

1. Plak alle draden foarsichtich yn 'e junction box.
2. Align the fixture with the mounting plate and secure it with the remaining screws.
3. Weromsette macht by de circuit breaker.

Figure 4.2: Installed flood light on an exterior wall.

5. Ynstelling en oanpassingen

The flood light features adjustable settings for the motion sensor and timer.

5.1 Adjusting the Sensor and Timer

The sensor unit has two adjustable dials located on its underside:

• TIMER Dial: Controls how long the light stays on after motion is detected. Options include 1 minute, 5 minutes, 10 minutes, or Dusk-to-Dawn (D2D).
• SENSITIVITY Dial: Adjusts the motion detection range. Options include 10 ft, 20 ft, 50 ft, or MAX (up to 70 ft).

To adjust, gently rotate the dials to your desired setting. The 'Test' mode on the TIMER dial allows for quick testing of motion detection during daylight hours.

Figure 5.1: Timer and Sensitivity adjustment dials.

5.2 Adjusting Light Head and Sensor Position

The light head and motion sensor can be adjusted to cover specific areas:

• The light head can be tilted up to 180° vertically.
• The arm connecting the sensor to the base can tilt 90° vertically.
• The motion sensor itself can tilt 180° vertically and swivel 180° horizontally, with a full 360° rotation capability.

Figure 5.2: Adjustable light head and motion sensor.

6. Bedriuwsinstruksjes

Once installed and configured, the Maxxima LED Outdoor Flood Wall Light operates automatically based on its sensor settings.

• Skimer-oant-moarnstiid modus (D2D): When the TIMER dial is set to D2D, the light will automatically turn on at dusk and remain on until dawn, regardless of motion.
• Motion Sensor Mode: When the TIMER dial is set to 1, 5, or 10 minutes, the light will activate when motion is detected within the set sensitivity range and ambient light conditions (typically at night). The light will remain on for the selected duration after the last motion is detected, then turn off.
• Testmodus: Setting the TIMER dial to 'Test' allows you to verify motion detection during daylight. The light will turn on for a few seconds when motion is detected, then turn off. This mode is useful for positioning the sensor.

7. Underhâld

This LED flood light requires minimal maintenance.

• Reiniging: Meitsje it apparaat periodyk skjin mei in sêfte, damp doek om smoargens en pún te ferwiderjen. Brûk gjin abrasive reinigingsmiddels of oplosmiddels.
• Ynspeksje: Regularly check for any loose connections or damage to the wiring or housing.
• The integrated LED light source is not user-replaceable.

8. Probleemoplossing

If you experience issues with your flood light, refer to the following table for common problems and solutions.

9. Spesifikaasjes

10. Garânsje

This Maxxima LED Outdoor Flood Wall Light is backed by a 3-jierrige garânsje fan 'e datum fan oankeap. Dizze garânsje dekt defekten yn materialen en fakmanskip by normaal gebrûk. Bewarje jo bewiis fan oankeap foar garânsjeclaims.

11. Stipe

For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer service.

Visit the Maxxima Store: MaxximaLEDLighting on Amazon

Maxxima is an American company with USA-based offices and customer service.