Aramox TM619H-2 Electronic Time Control Switch

1. Ynlieding

This manual provides detailed instructions for the installation, operation, and maintenance of your Aramox TM619H-2 Electronic Time Control Switch. Please read this manual thoroughly before using the device to ensure proper function and safety. Keep this manual for future reference.

2. Safety Information

• Skeakelje altyd de stroom út foar ynstallaasje of ûnderhâld om elektryske skokken te foarkommen.
• Ynstallaasje moat útfierd wurde troch in kwalifisearre elektricien of in persoan mei kennis fan saken.
• Ensure the wiring connections are secure and comply with local electrical codes.
• Stel it apparaat net bleat oan tefolle focht, stof of ekstreme temperatueren.
• The device is designed for indoor use unless otherwise specified.

3. Produkt Overview

The Aramox TM619H-2 is a digital time control switch designed for precise scheduling of electrical devices. It features an LCD digital display and supports both 24-hour and 12-hour time systems. This model operates on 12V DC and includes a memory backup function to retain programming during power interruptions (requires a 3V lithium battery, not included).

Key Features:

• Digitaal LCD-display foar dúdlike tiid en programma viewing.
• Supports 24-hour and 12-hour time systems.
• Programmable ON/OFF events.
• Memory backup during power outages (with installed battery).
• Manual override function.

Komponinten:

The device consists of a main body with an LCD display and control buttons on the front, and wiring terminals on the back.

figuer 1: Front view of the TM619H-2 timer switch, displaying the LCD screen and various control buttons such as CLOCK, TIMER, DAY, HOUR, MIN, and MANUAL.

4. Spesifikaasjes

5. Opsette

5.1. Battery Installation (for Memory Backup)

The TM619H-2 requires a 3V lithium battery (e.g., CR2032, not included) for memory backup. This battery ensures that your programmed settings are retained during power outages. Locate the battery compartment, insert the battery with the correct polarity, and close the compartment.

5.2. Montage

The timer switch is designed for panel assembly. Secure the device in a suitable enclosure or panel cutout using appropriate mounting hardware (not included).

5.3. Bedrading

Refer to the wiring diagram on the back of the device and the images below for correct connections. Ensure all connections are tight and insulated.

figuer 2: Efterkant view of the TM619H-2 timer switch, illustrating the input and output terminals for wiring.

Figure 3: Comparison of wiring configurations for new and old versions of the TM619H-2 model. Always refer to the diagram on your specific unit.

Algemiene bedradingsgids:

• Input Power (DC12V): Connect your 12V DC power supply to the designated input terminals (typically labeled 'INPUT' or 'LINE').
• Laadútfier: Connect the device you wish to control to the output terminals (typically labeled 'OUTPUT' or 'LOAD'). The timer acts as a switch for this load.
• Ensure the load's current draw does not exceed the timer's maximum rating of 30A.

6. Bedriuwsinstruksjes

6.1. Earste ynskeakeljen en weromsette

Upon first power-up or after battery installation, the display may show random characters. Press the R (Reset) button (usually a small recessed button requiring a pointed object) to clear all settings and initialize the timer.

6.2. Ynstelle fan aktuele tiid

1. Druk op de KLOK button and hold it.
2. Wylst hâlden KLOK, druk DEI om de aktuele dei fan 'e wike yn te stellen.
3. Wylst hâlden KLOK, druk OERE om it hjoeddeistige oere yn te stellen.
4. Wylst hâlden KLOK, druk MIN om de aktuele minút yn te stellen.
5. Release de KLOK knop. De tiid is no ynsteld.

6.3. Switching 12/24-Hour System

To switch between 12-hour (AM/PM) and 24-hour formats, press the KLOK knop en dan de TIMER knop tagelyk.

6.4. Programmearjen fan OAN/ÚT-eveneminten

The TM619H-2 allows you to set multiple ON/OFF programs. Follow these steps:

1. Druk op de TIMER knop ien kear. It display sil "1 ON" sjen litte.
2. Parse DEI to select the day(s) for this ON event (e.g., Mon-Fri, Sat-Sun, every day, specific day).
3. Parse OERE to set the desired hour for the ON event.
4. Parse MIN to set the desired minute for the ON event.
5. Druk op de TIMER button again. The display will show "1 OFF".
6. Repeat steps 2-4 to set the day(s), hour, and minute for the corresponding OFF event.
7. Trochgean te drukken TIMER to cycle through other program settings (2 ON, 2 OFF, etc.).
8. Nei it ynstellen fan alle winske programma's, druk op de KLOK knop om de programmearmodus te ferlitten en werom te gean nei de werjefte fan 'e hjoeddeiske tiid.

6.5. Hânlieding oerskriuwe

De HANTLIEDING button allows you to override the programmed settings temporarily. Pressing this button cycles through different modes:

• OP: The output is continuously ON, ignoring programs.
• AUTO ON: The output is currently ON and will follow the next programmed OFF event.
• AUTO OFF: The output is currently OFF and will follow the next programmed ON event.
• ÚT: The output is continuously OFF, ignoring programs.

Select "AUTO ON" or "AUTO OFF" for the timer to resume automatic operation based on your programs.

7. Underhâld

• Reiniging: Feie it apparaat ôf mei in sêfte, droege doek. Brûk gjin abrasive reinigingsmiddels of oplosmiddels.
• Batterij ferfanging: If the display becomes dim or programs are lost frequently during power interruptions, the 3V lithium backup battery may need replacement. Follow the battery installation steps in Section 5.1.
• Ynspeksje: Kontrolearje de bedrading periodyk op strakheid en tekens fan slijtage.

8. Probleemoplossing

9. Garânsje en stipe

For warranty information or technical support, please refer to the documentation provided at the point of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.