1. Produkt Overview
The Insoma Water Timer SGW01 is designed to automate your garden and lawn watering, providing convenience and efficient water management. This 1-zone outdoor hose timer features Auto, Manual, and Rain Delay modes, along with a Child Lock function for enhanced control and safety.
Key Features:
- Maklike programmearring: Customize start time, watering frequency (every 1-23 hours or 1-15 days), and duration (1-360 minutes).
- Hânlieding wetterje: Initiate watering on demand without altering preset schedules.
- Reinfertraging: Pause scheduled watering for 1 to 15 days to conserve water during rainfall.
- Berneslot: Prevents accidental changes to programming.
- Grutte LCD-display: Clear display of current time, start time, frequency, duration, next watering time, and battery level.
- Duorsum ûntwerp: IPX5 waterproof rating, anti-UV coating, anti-rust materials, and a sealed battery cover for outdoor use.
- Ynstallaasje sûnder ark: Features a 360° swivel inlet and metal filter.
Figure 1: Insoma Water Timer SGW01 with highlighted features.
2. Ynstallaasje
Follow these steps to properly install your Insoma Water Timer.
- Batterij ynstallaasje:
- Sykje it batterijfak oan 'e efterkant fan' e timer.
- Open the compartment and insert two (2) AA 1.5V Alkaline batteries (not included), ensuring correct polarity (+/-).
- Close the battery compartment securely to maintain the waterproof seal. The timer is designed to run for over 6 months on a fresh set of batteries.
- Befestigje oan kraan:
- Soargje derfoar dat jo bûtenkraan ticht is.
- Thread the timer's inlet connector onto your standard outdoor garden faucet. The 360° swivel inlet allows for easy positioning. Hand-tighten only; do not overtighten.
- Verify that the metal filter is properly seated in the inlet to prevent debris from entering the timer.
- Slang ferbine:
- Connect your garden hose to the outlet of the water timer. Hand-tighten to ensure a secure, leak-free connection.
- Wetter oansette:
- Slowly turn on your outdoor faucet completely. The timer requires water pressure to operate correctly (0.5 Bar to 8 Bar / 7.25 psi to 116 psi).
- Kontrolearje op eventuele lekken by de ferbiningen.
Figure 2: The Insoma Water Timer automates watering, eliminating the need for manual intervention.
3. Bedriuwsmodi en programmearring
The Insoma Water Timer offers flexible programming options to suit various watering needs.
3.1 De aktuele tiid ynstelle
Before programming, ensure the current time is set accurately.
- Press the 'SET OK' button to enter the setting mode.
- Brûk de knoppen '+' en '-' om it oere en de minuten oan te passen.
- Press 'SET OK' to confirm each setting and move to the next.
- Press 'ESC MANUAL' to exit the setting mode.
3.2 Automatic Watering (Cycle Mode)
Program your timer for automatic, scheduled watering.
Figure 3: Hour and Day Cycle Modes for automatic watering frequency.
- Begjintiid ynstelle:
- Press 'SET OK' until 'START TIME' flashes on the display.
- Use '+' and '-' to set your desired watering start time.
- Press 'SET OK' to confirm.
- Set Watering Duration:
- When 'WATERING DURATION' flashes, use '+' and '-' to set the length of each watering cycle (1 to 360 minutes).
- Press 'SET OK' to confirm.
- Set Watering Frequency:
- When 'WATERING FREQUENCY' flashes, use '+' and '-' to choose how often watering occurs. You can select from every 1 to 23 hours, or every 1 to 15 days.
- Press 'SET OK' to confirm.
- Press 'ESC MANUAL' to save settings and exit programming. The timer will now operate according to your schedule.
3.3 Hânlieding wettering
Use manual mode for immediate, unscheduled watering without affecting your programmed schedule.
Figure 4: Manual watering can be activated anytime for flexible use.
- Press the 'ESC MANUAL' button once. The display will show 'MANUAL'.
- Use the '+' and '-' buttons to set the desired manual watering duration (1 to 360 minutes).
- Press 'SET OK' to start manual watering. The timer will run for the set duration and then return to its automatic schedule.
- To stop manual watering prematurely, press 'ESC MANUAL' again.
3.4 Reinfertragingsmodus
Pause your watering schedule during rainy periods to prevent overwatering and conserve water.
Figure 5: Activate Rain Delay to pause watering for up to 15 days.
- In normal operating mode, press and hold the '+' button for 3 seconds. The display will show 'DELAY' and a number of days.
- Use the '+' and '-' buttons to select the desired delay duration (1 to 15 days).
- Press 'SET OK' to confirm the rain delay. The timer will pause for the selected period and automatically resume its programmed schedule afterward.
- To cancel rain delay prematurely, press and hold the '+' button again for 3 seconds.
3.5 Berneslotfunksje
Activate the Child Lock to prevent accidental changes to your watering program.
Figure 6: Child Lock prevents unintended program modifications.
- To activate Child Lock, press and hold the '-' button for 5 seconds until a lock icon appears on the screen.
- To deactivate Child Lock, press and hold the '-' button again for 5 seconds until the lock icon disappears.
4. Underhâld
Proper maintenance ensures the longevity and optimal performance of your water timer.
- Reiniging: Periodically clean the metal filter located in the inlet to prevent blockages. Remove the timer from the faucet, take out the filter, rinse it under running water, and reinsert it.
- Batterij ferfanging: Replace batteries when the low battery indicator appears on the LCD screen. Always use new AA 1.5V Alkaline batteries.
- Winter opslach: Before the first frost, disconnect the water timer from the faucet and hose. Drain any remaining water from the unit. Store the timer indoors in a dry, frost-free location. Remove batteries if storing for extended periods.
5. Probleemoplossing
Sjoch dit diel foar oplossingen foar faak foarkommende problemen.
| Probleem | Mooglike oarsaak | Oplossing |
|---|---|---|
| Timer does not turn on/LCD is blank. | Gjin batterijen of lege batterijen. | Install new AA 1.5V Alkaline batteries, ensuring correct polarity. |
| Wetter streamt net. | Faucet is off; low water pressure; clogged filter; incorrect program. | Ensure faucet is fully open. Check water pressure (must be 0.5-8 Bar). Clean the metal filter. Verify program settings. |
| Timer leaks at connections. | Loose connection; missing/damaged washer. | Hand-tighten connections. Ensure rubber washers are properly seated and undamaged. Replace if necessary. |
| Timer not watering at scheduled time. | Incorrect program; Rain Delay active; Child Lock active. | Review and adjust program settings. Check if Rain Delay is active and cancel if needed. Deactivate Child Lock. |
| It display is lestich te lêzen. | Lege batterij. | Ferfange batterijen. |
6. Spesifikaasjes
- Model: SGW01
- Sônes: 1
- Materiaal: Plastic Inlet and Outlet
- Wetterdrukberik: 0.5 Bar - 8 Bar (7.25 psi - 116 psi)
- Wetterperioade: 1 minute - 360 minutes
- Wetterfrekwinsje: Elke 1-23 oeren of elke 1-15 dagen
- Reinfertraging: 1-15 dagen
- Power Boarne: 2 x AA 1.5V alkaline batterijen (net ynbegrepen)
- Batterij libben: Approximately 6+ months
- Wetterdicht wurdearring: IPX5
- Produkt Ofmjittings: 4.6" D x 4.6" W x 2" H
- Item Gewicht: 0.6 pûn sterling
7. Garânsje en stipe
Insoma products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Insoma webside. Bewarje jo oankeapbewiis as bewiis fan oankeap foar garânsjeclaims.
