MLOVE E90 Bluetooth Speaker User Manual

Ynlieding

Thank you for choosing the MLOVE E90 Bluetooth Speaker. This manual provides detailed instructions for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity. Please read this manual thoroughly before using the product and retain it for future reference.

Produkt oerview

Wat is yn 'e doaze

• MLOVE E90 Bluetooth Speaker
• USB-C oplaadkabel
• Skouderriem
• Quick Start Guide

Key Features

• 80W Powerful Stereo Sound: Delivers robust audio output for an immersive listening experience.
• Dynamyske RGB-ferljochting: Features customizable RGB lights that sync with music, enhancing the ambiance.
• IP65 Stofdicht en wetterdicht: Designed for outdoor use, resistant to dust and water splashes.
• True Wireless Stereo (TWS) Funksje: Allows pairing two E90 speakers for enhanced stereo sound.
• Meardere ôfspielmodi: Supports Bluetooth, AUX-in, USB drive, and MicroSD card playback.
• Lange batterijlibben: Equipped with a large capacity battery for extended playtime.
• Portable ûntwerp: Includes a shoulder strap for easy transport.

Image: Internal components of the MLOVE E90 speaker, highlighting its 80W peak power output, 5-unit acoustic configuration, including two 33mm dome tweeters, two 111mm bass radiators, and a 90x120mm oval mid-bass driver.

Image: The MLOVE E90 speaker illustrating its powerful battery life, emphasizing its large capacity and Type-C quick charge capability for uninterrupted listening.

Image: The MLOVE E90 speaker shown with water splashing around it, highlighting its IP65 dustproof and waterproof rating, making it suitable for various outdoor environments and temperatures from -10°C to 45°C.

Setup Guide

1. De sprekker oplade

1. Locate the USB-C charging port, usually protected by a rubber flap on the back or side of the speaker.
2. Connect the provided USB-C cable to the speaker's charging port.
3. Ferbine it oare ein fan 'e USB-C-kabel mei in kompatibel USB-stroomadapter (net ynbegrepen) of de USB-poarte fan in kompjûter.
4. The charging indicator lights will illuminate, typically showing charging progress. A full charge may take approximately 4.5 hours with a 3A charger.
5. Once fully charged, disconnect the charging cable and ensure the rubber flap is securely closed to maintain water resistance.

2. Oan- / útskeakelje

• Om oan te setten: Press and hold the Power button for a few seconds until you hear an audible prompt or see the indicator lights activate.
• Om út te skeakeljen: Druk de oan/út-knop nochris in pear sekonden yn en hâld dy yndrukt oant jo in lûdssignaal hearre of de yndikatorljochten útgeane.

3. Bluetooth-keppeling

1. Soargje derfoar dat de sprekker oan is en yn Bluetooth-koppelingsmodus is. It Bluetooth-yndikatorljocht sil normaal knipperje.
2. Skeakelje Bluetooth yn op jo apparaat (smartphone, tablet, kompjûter) en sykje nei beskikbere apparaten.
3. Select "MLOVE E90" from the list of found devices.
4. Sadree't de sprekker keppele is, sil hy in hoorbere befêstiging útstjoere, en it Bluetooth-yndikatorljocht sil fêst oangean.
5. The speaker supports Bluetooth 5.4 for stable and efficient connection.

Image: The MLOVE E90 speaker demonstrating its ability to connect to two devices simultaneously (e.g., a smartphone and a tablet) with seamless switching, utilizing Bluetooth 5.4 for stable playback.

4. Echt draadloze stereo (TWS) koppeling

To achieve a true stereo sound experience, you can pair two MLOVE E90 speakers together.

1. Ensure both MLOVE E90 speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press the TWS button (refer to your Quick Start Guide for button location). The TWS indicator light will flash.
3. De primêre sprekker sil automatysk sykje nei de sekundêre sprekker.
4. Once connected, both speakers will emit an audible confirmation, and the TWS indicator lights will become solid.
5. Now, connect your device to the primary speaker via Bluetooth as described in step 3. Audio will play in stereo through both speakers.

Image: Two MLOVE E90 speakers shown wirelessly connected, demonstrating the True Wireless Stereo (TWS) function which allows them to play audio in synchronized stereo for an enhanced listening experience.

Operating Instructions

Basis kontrôles

• Power knop: Druk en hâld om oan / út te skeakeljen.
• Knop spielje/pauze: Druk ien kear om muzyk te spyljen of te pauzearjen.
• Volume omheech (+): Press once to increase volume. Press and hold to skip to the next track.
• Volume del (-): Press once to decrease volume. Press and hold to skip to the previous track.
• Modusknop (M): Press to switch between playback modes (Bluetooth, AUX, USB, MicroSD).
• Ljochtknop: Press to cycle through RGB light modes. Press and hold to turn lights off/on.
• Bass Boost knop: Press to activate/deactivate enhanced bass.

RGB Light Modes

The MLOVE E90 features dynamic RGB lighting with 16.8 million colors. Use the Light button to cycle through various modes, including beat-sync and dynamic flowing light effects. Press and hold the Light button to turn the lights off or on.

Image: The MLOVE E90 speaker displaying its dynamic RGB and strobe lights in an outdoor party setting, illustrating features like 16.8 million colors, aircraft strobe light effects, beat synchronization, and dynamic flowing light patterns.

Meardere Wiedergabe Modes

De sprekker stipet ferskate audio-ynfiermetoaden:

• Bluetooth 5.4: Draadloze ferbining mei kompatibele apparaten.
• AUX-yn: Ferbine eksterne audio-apparaten mei in 3.5mm audiokabel (net ynbegrepen).
• USB Playing: Foegje in USB-flash-drive mei audio yn files (WAV, WMA, MP3 formats supported).
• MicroSD Card Playing: In MicroSD-kaart mei audio ynfoegje files (WAV, WMA, MP3 formats supported).

Use the Mode button to switch between these input sources. The speaker will automatically detect and switch to an inserted USB drive or MicroSD card.

Image: The MLOVE E90 speaker displaying its connectivity panel with ports for USB-C charging, USB-A for playing music from a USB drive and power bank functionality, and a 3.5mm AUX-in port, alongside icons for Bluetooth 5.4, AUX-in, USB Playing, and Lossless Music Playing.

Ûnderhâld

Cleaning

• Wiskje de sprekker mei in sêfte, damp doek.
• Brûk gjin abrasive reinigingsmiddels, alkohol of gemyske oplosmiddels, om't dizze it oerflak beskeadigje kinne.
• Ensure all port covers are securely closed before cleaning with a damp doek.

Wetterbestindich (IP65)

• The MLOVE E90 is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction.
• This speaker is suitable for use in light rain or near water, but it should not be submerged in water.
• Always ensure the rubber flap covering the charging and input ports is securely closed to maintain water resistance.
• Do not expose the speaker to saltwater or other corrosive liquids. If exposed, rinse with fresh water and dry thoroughly.

Opslach

• Bewarje de sprekker op in koel, droech plak, fuort fan direkt sinneljocht en ekstreme temperatueren.
• If storing for an extended period, charge the battery to approximately 50% every few months to preserve battery health.

Troubleshooting

Spesifikaasjes

Garânsje en stipe

The MLOVE E90 Bluetooth Speaker comes with a 2-jierrige beheinde garânsje fan 'e fabrikant fanôf de datum fan oankeap. Dizze garânsje dekt produksjefouten en fakmanskip ûnder normaal gebrûk.

De garânsje dekt gjin skea feroarsake troch misbrûk, ûngemakken, net-autorisearre oanpassingen of normale slijtage. Bewarje jo bewiis fan oankeap foar garânsjeclaims.

Klant Support

For technical assistance, warranty claims, or any questions regarding your MLOVE E90 speaker, please contact our customer support team. Refer to the contact information provided in your Quick Start Guide or on the official MLOVE website.

Opmerking: Spesifike kontaktgegevens kinne ferskille per regio.