LTECH M9 LED Controller Instruction Manual

LTECH M9 LED Controller

The MINI Series LED Remote Controller adopts RF 2.4GHz wireless transmission technology, with a maximum control distance of up to 30 meters (when unobstructed). When used with the P Series Controllers (P1/P2/P3/P4/P5), one controller supports 5-channel output and is compatible with five types of lamps: DIM (dimming), CT (color temperature), RGB (three-primary color), RGBW (RGB + white), and RGBCW (RGB + cool white + warm white). Within the effective control range, one remote controller can control an unlimited number of controllers, enabling functions such as light on/off, brightness adjustment, color temperature adjustment, RGB static color adjustment, and dynamic mode effects.

It has 9 built-in dynamic modes that can be programmed and modified via the remote controller, meeting users’ needs for different lighting applications. Additionally, it supports enabling/disabling the power-off memory mode and allows setting a 1-9 second fade-in/fade-out time for the controller’s on/off operation.

Technyske parameters

Ofmjittings

Produkt Ynstallaasje

Twa manieren om de ôfstânhâlder te reparearjen:

1. Befestigje de ôfstânhâlder yn 'e muorre mei twa skroeven.
2. Befestigje de ôfstânhâlder yn 'e muorre mei in 3M-kleefstof.

Noat: Trek asjebleaft de batterijljepper út foar it earste gebrûk

Knop Funksjes

• Oan/út: Press briefly to turn the light on or off.
• Red / Grien / Blau: Press briefly to turn the static red/green/blue channel on or off; Press and hold to adjust the brightness of the current channel.
• W/CCT: Press briefly to turn the W/CCT channel on or off; Press and hold to adjust the brightness of the W channel or the color temperature of the CCT channel.
• CCT Brightness: Press and hold to adjust the brightness of the CCT channel.
• Color Save Button: Press briefly to recall the saved static color;  Press and hold to save the current static color.
• Program Play Button: Press briefly to switch between 3 dynamic effects (jump, fade, stroboscope) (applied to transitions between saved static colors); Press and hold to play 9 dynamic modes in a loop.
• Mode Save Button: Press briefly to recall the dynamic mode; Press and hold to save the current dynamic effect as a dynamic mode.
• Faasje/helderheid +/-: Press briefly to adjust the speed of the dynamic mode; Press and hold to adjust the brightness of the dynamic mode.
• Power-Off Memory Mode Switch: Press briefly to enable/disable the memory mode of the current controller.
• On/Off Fade Time: Press and hold the “FADE TIME” button and the Mode Save Button (while pressing the number keys 1-9) to set the on/off fade time of the controller (1-9 seconds).

Usage of the Programming Button

1. Color Selection: Use the number keys 1-7 to store 7 colors. After selecting a color by pressing the RGB button press and hold the Color Save Buttons in sequence to save the current static color. (The color will be automatically saved to the corresponding button.)
2. Press the Programming Play Button to set 3 dynamic effects for the 1-7 static colors.(Single press to switch: Jump, Fade, Strobe)
   Exampljo 1:Red, Green, Blue, Yellow, Purple, Cyan, White Seven colors, Jump/Fade/Strobe
   Exampljo 2:Red, Blue Two colors, Jump/Fade/Strobe
   Exampljo 3:
   Red, White, Green, White 4, Blue Five colors, Jump/Fade/Strobe
   Note: R + B = Purple, R + G = Yellow, G + B = Cyan, R + G + B = White, R/G/B turned off together = Black
3. Press the Speed/Brightness +/- buttons briefly to control the mode brightness. There are 8 brightness levels in total, with the default level set to 5.
4. Press and hold the Mode Save Buttonto save the current static color + dynamic effect to one of the Mode Save Buttons (1-9).

Change Mode Selection List

NEE.	Color(Switch Colors via  )	Switch Between 3 Types via   Button Press
		Springe	Fade	Strobe
1	Swart
2	Read	Statysk read	Red Fade In and Out	Red Strobe
3	Grien	Statysk Grien	Green Fade In and Out	Griene Strobe
4	Blau	Statysk blau	Blau fade yn en út	Blauwe Strobe
5	Giel	Statysk giel	Yellow Fade In and Out	Gele Strobe
6	Pears	Statyske pears	Purple Fade In and Out	Purple Strobe
7	Cyan	Statyske cyaan	Cyan Fade In and Out	Cyan Strobe
8	Wyt	Static Wit	White Fade In and Out	Wite strobe
9	Red / Grien / Blau	Red-Grien-Blauwe Jump	Red-Grien-Blue Fade	Red-Green-Blue Strobe
10	Red/Green/Blue/Yellow/ Purple/Cyan/White	Seven-Color Jump	Seven-Color Fade	Seven-Color Strobe

Wiring Diagram for Receiver and Controller

Noat: One remote control can control an unlimited number of controllers

Knopfunksje weromsette

• Reset Static Color:
  Turn off all channels, then press and hold the Color Save Button corresponding to the static color you want to reset to save. This will clear the current static color.
• Reset Dynamic Modes:
  Press and hold both the Color Save Button “5” and the Programming Play Button simultaneously until the indicator light flashes several times and then turns off. This indicates that all dynamic modes have been reset successfully.
• Synchronize the Remote Control’s Dynamic Modes to the Controller:
  Press and hold both the Color Save Button “1” and “4” until the indicator light flashes several times and then turns off. This indicates that all dynamic modes edited on the remote control have been fully synchronized to the controller.
  Note: If the dynamic modes of the remote control have been reset, you need to synchronize the reset dynamic modes of the remote control to the controller again. This avoids desynchronization between the remote control and the controller’s dynamic modes, which would cause abnormal effect issues.

Pair the Controller

Koade Matching

1. Method 1: Button Code Matching
   Briefly press the Controller ID Learning Button; the load light will flash. Within 10 seconds, press and hold the Remote Control’s On/Off Button until the load light flashes slowly and then stays on. This indicates successful code matching.
2. Method 2: Power-On Code Matching
   Skeakelje de controller út;
   After powering the controller on again, press and hold the On/Off Button on the remote control within 3 seconds until the load light flashes slowly and then stays on. This indicates successful code matching.

Koade Clearing

• Button Code Clearing Method:
  Press and hold the Controller ID Learning Button for 10 seconds. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.
• Power-On Code Clearing Method:
  Perform 10 consecutive power-on and power-off operations on the controller. The load light will flash 5 times, indicating that all paired controllers have been completely deleted.

Indicator Light Status

• When the light is on, press any button, and the remote control’s indicator light will turn red.
• If no button is pressed for 30 seconds, the remote control will enter sleep mode. To exit sleep mode, press any button.

Noat: If the LED light does not turn on when the button is pressed, the battery may be dead. Please replace the battery in a timely manner.

Ferfier en opslach

1.  Transport
   Produkten kinne wurde ferstjoerd fia auto's, boaten en fleantugen.
   Tidens it ferfier moatte produkten beskerme wurde fan rein en sinne. Foarkom asjebleaft swiere skok en trilling tidens it laden en lossen proses.
2. Opslach
   De opslachbetingsten moatte foldwaan oan de Klasse I Miljeustanderts. De produkten dy't mear as seis moannen binne opslein wurde oanrikkemandearre om opnij te ynspektearjen en kinne allinich brûkt wurde nei't se kwalifisearre binne.

Oandacht
Brûk asjebleaft yn in droege binnenomjouwing;

• By it ynstallearjen fan de batterij, ferbine asjebleaft de positive en negative terminal korrekt. As de ôfstân net brûkt wurdt foar in lange perioade, nim dan de batterij út;
• As de ôfstân op ôfstân wurdt ferkoarte en as de ôfstân net faak wurket, feroarje asjebleaft de batterij op 'e tiid;
• Nim it asjebleaft foarsichtich en set it del om falten te foarkommen dy't skea feroarsaakje;
• As der in fout optreedt, besykje dan net produkten sels te reparearjen. As jo ​​​​fragen hawwe, nim dan kontakt op mei jo leveransiers.
• Dit hantlieding is ûnder foarbehâld fan feroaringen sûnder fierdere notice. Produktfunksjes binne ôfhinklik fan it guod. Nim dan gerêst kontakt mei ús offisjele distributeurs as jo fragen hawwe.

Garânsjeakkoart

Garânsje perioaden út de datum fan levering: 5 jier.
Fergese reparaasje- of ferfangende tsjinsten foar kwaliteitsproblemen wurde levere binnen garânsjeperioaden.

Utsein fan garânsjes hjirûnder:
De folgjende betingsten binne net binnen it garânsjeberik fan fergese reparaasje- of ferfangende tsjinsten:

• Beyond garânsje perioaden;
• Elke keunstmjittige skea feroarsake troch hege voltage, overload, or improper operations; Products with severe physical damage;
• Skea feroarsake troch natuerrampen en oermacht;
• Garânsjeetiketten en barcodes binne skansearre.
• No any contract signed by our company.

1. Repair or replacement provided is the only remedy for customers. Our company is not liable for any incidental or consequential damage unless it is within the law.
2.  Our company has the right to amend or adjust the terms of this warranty, and release in written form shall prevail.

WARSKÔGING

• INGESTION HAZARD: Dit produkt befettet in knop sel of munt batterij.
• DEATH of serieuze ferwûning kin foarkomme as ynnommen.
• In opslokte knopsel of muntbatterij kin ynterne gemyske Burns yn sa min as 2 oeren feroarsaakje.
• Hâld nije en brûkte batterijen BUITEN BEREIK FAN KINDERN
• Sykje direkte medyske oandacht as in batterij wurdt fertocht wurde opslokt of ynfoege yn elk diel fan it lichem.
• Fuortsmite en fuortdaliks recycle of ferwiderje brûkte batterijen neffens lokale regeljouwing en hâld fuort fan bern. Wergje batterijen NET yn húslik jiskefet of ferbaarnen.
• Sels brûkte batterijen kinne swiere ferwûnings of dea feroarsaakje.
• Rop in pleatslik gifkontrôlesintrum foar behannelingynformaasje.
• It kompatible batterijtype: CR2032.
• De nominale batterij voltage:3 v.
• Net-oplaadbere batterijen moatte net opladen wurde.
• Net twinge ûntslach, opladen, disassemble, waarmte boppe (oantsjutte temperatuer rating fan de fabrikant) of ferbaarnen. Dat dwaan kin liede ta blessuere troch ventilaasje, lekkage of eksploazje dy't resultearje yn gemyske brânwûnen.
• Soargje derfoar dat de batterijen goed ynstalleare binne neffens polariteit (+ en -).
• Meitsje gjin âlde en nije batterijen, ferskate merken of soarten batterijen, lykas alkaline, koalstof-sink, of oplaadbare batterijen.
• Fuortsmite en fuortdaliks recycle of ferwiderje batterijen út apparatuer net brûkt foar in langere perioade fan tiid neffens lokale regeljouwing.
• Altyd folslein feilich it batterij compartment. As it batterijcompartiment net feilich slút, stopje dan mei it brûken fan it produkt, ferwiderje de batterijen en hâld se fuort fan bern.

Faak stelde fragen